Wattstopper LMSW-105-W Wallmount Digital 5 Button Scene Switch User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of the Legrand Wattstopper LMSW-105-W Wallmount Digital 5 Button Scene Switch. This device is designed for low voltage control of lighting scenes and individual loads in commercial and residential applications. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Informazzjoni dwar is-Sigurtà

• TWISSIJA: L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi lokali u nazzjonali kollha.
• Disconnect power at the circuit breaker before installing or servicing the switch.
• Do not use this device with incompatible voltage or current ratings. Refer to the specifications section for details.
• Kun żgur li l-konnessjonijiet kollha huma siguri biex tevita perikli elettriċi.
• Dan l-apparat huwa għal użu fuq ġewwa biss.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Wattstopper LMSW-105-W Wallmount Digital 5 Button Scene Switch
• Viti tal-Immuntar
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Prodott Aktarview

The LMSW-105-W is a low-voltage digital scene switch designed for intuitive control of lighting systems. It features a main rocker switch and four smaller scene buttons, allowing for flexible control of multiple lighting configurations.

Din l-immaġni turi l-parti ta’ quddiem view of the Wattstopper LMSW-105-W Wallmount Digital 5 Button Scene Switch. It features a large rocker switch on the left for primary control and four smaller push buttons on the right for scene selection. A small LED indicator is visible above the rocker switch, and a black rectangular display or indicator is located at the bottom center. The switch is white with a gray mounting plate.

Karatteristiċi ewlenin:

• Vol baxxtage switch for control of four preset scenes and raise/lower control of scenes or loads.
• Plug n' Go™ automatic configuration for simplified setup.
• Push n' Learn functionality for personalized scene programming.
• Active dim feature allows temporary adjustment of any selected load.
• Two RJ45 ports for connection to compatible systems.
• LED status indicators for visual feedback.

5. Installazzjoni

Għodod Meħtieġa: Screwdriver, Wire Strippers.

1. Itfi l-Enerġija: Before starting, ensure power is disconnected at the circuit breaker to avoid electrical shock.
2. Ipprepara l-Wajers: Strip approximately 1/2 inch (12mm) of insulation from the wires.
3. Qabbad Wajers: Qabbad il-volum baxxtage wires to the appropriate terminals on the back of the switch. The LMSW-105-W typically uses RJ45 connections for system integration. Refer to your system's wiring diagram for specific connections to the LM dimming room controller or other compatible devices.
4. Swiċċ tal-Immuntar: Carefully place the switch into the wall box and secure it with the provided mounting screws.
5. Installa l-Wallplate: Attach the decorative wallplate (not included) over the switch.
6. Irrestawra l-Enerġija: Erġa 'aqleb l-enerġija fis-circuit breaker.

6. Operazzjoni

Kontroll Bażiku:

• Main Rocker Switch: The large rocker switch on the left typically controls the primary load or acts as a master on/off for the selected scene. Press the top for ON/Raise, bottom for OFF/Lower.
• Scene Buttons (1-4): The four smaller buttons on the right are used to recall pre-programmed lighting scenes. Pressing a scene button will activate the corresponding lighting configuration.

Active Dim Feature:

While a scene is active, you can temporarily adjust the dimming level of individual loads within that scene using the main rocker switch. This adjustment is temporary and will revert to the programmed scene level when a new scene is selected or the system is reset.

7. Konfigurazzjoni

Plug n' Go™ Automatic Configuration:

The LMSW-105-W supports Plug n' Go™ functionality, allowing for automatic detection and basic configuration when connected to a compatible Wattstopper lighting control system. Upon initial power-up, the switch will attempt to establish communication and configure itself with default settings.

Push n' Learn for Personalization:

For advanced personalization and scene programming, the Push n' Learn feature allows users to customize the lighting levels associated with each scene button. Refer to your specific lighting control system's manual for detailed instructions on how to enter Push n' Learn mode and program scenes. Typically, this involves setting the desired lighting levels for each load and then saving them to a scene button by pressing and holding the button for a specified duration.

8. Manutenzjoni

The Wattstopper LMSW-105-W switch requires minimal maintenance.

• Tindif: To clean the surface of the switch, use a soft, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Spezzjoni: Periodically inspect the switch for any visible damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

9 Issolvi l-problemi

10. Speċifikazzjonijiet

11. Informazzjoni dwar Garanzija

Legrand products are manufactured to the highest quality standards. For specific warranty details, including duration and terms, please refer to the official Legrand warranty statement provided with your purchase or visit the Legrand websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

12. Appoġġ

If you encounter any issues or have questions not covered in this manual, please contact Legrand customer support:

• Websit: Visit the official Legrand websit għal FAQs, dokumentazzjoni tal-prodott, u informazzjoni ta' kuntatt għall-appoġġ.
• Appoġġ Tekniku: Refer to the contact details provided on the Legrand websit għall-assistenza teknika.