Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your Anchor Audio Beacon 2 Portable Sound System. Please read this manual thoroughly before using the system to ensure optimal performance and longevity.
The Anchor Audio Beacon 2 is a highly portable all-in-one PA system designed for mid-size events. It features a line array configuration with multiple speakers and subwoofers, offering clear and powerful audio output. Its compact, foldable design with built-in wheels and a retractable handle ensures easy transport.
Prodott Overview
Figure 1: The Beacon 2 system in its folded, compact configuration, ready for transport. This view highlights the integrated wheels and retractable handle.
Figure 2: The Beacon 2 system fully unfolded and extended, showcasing its line array speaker configuration for optimal sound dispersion during operation.
Figura 3: Dettaljat view of the rear control panel, showing various inputs, outputs, volume controls, and the AIR Companion Transmitter section.
Setup
Unfolding the System
- Place the Beacon 2 on a flat, stable surface.
- Release the latches securing the speaker array.
- Carefully extend the speaker array upwards until it locks into place. Ensure all sections are securely seated.
Tixgħel
- Ensure the system's internal batteries are charged. Connect the power cable to a standard AC outlet if charging is needed or for continuous operation.
- Locate the main power switch on the rear panel (refer to Figure 3).
- Flip the switch to the 'ON' position. The power indicator light should illuminate.
Istruzzjonijiet Operattivi
Konnessjoni Mikrofoni
- The Beacon 2 supports up to four wireless microphones via its two dual wireless mic receivers.
- For wired microphones, connect them to the universal microphone jacks on the rear panel.
- Adjust the individual volume controls for each microphone input as needed.
Streaming Bluetooth
- Attiva l-Bluetooth fuq l-ismartphone jew it-tablet tiegħek.
- On the Beacon 2's rear panel, press the Bluetooth pairing button. The Bluetooth indicator light will flash.
- Select "Anchor Audio Beacon 2" from the list of available devices on your smart device.
- Ladarba jkun imqabbad, id-dawl indikatur tal-Bluetooth jibqa' mixgħul. Issa tista' tixxandar l-awdjo mingħajr fili.
Inputs Awżiljarji
The system includes 3.5mm and 1/4-inch aux inputs for connecting external audio sources such as laptops, MP3 players, or other audio devices. Use the corresponding volume controls to adjust the input level.
Manutenzjoni
- Tindif: Use a soft, dry cloth to clean the exterior surfaces of the system. Avoid using abrasive cleaners or solvents.
- Kura tal-batterija: For optimal battery life, fully charge the system after each use. If storing for extended periods, charge the battery every 3-6 months.
- Ħażna: Store the Beacon 2 in its folded, compact position in a cool, dry place away from direct sunlight and extreme temperatures.
- Spezzjoni: Periodically inspect cables, connectors, and the speaker array for any signs of wear or damage.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output tal-ħoss | System not powered on; Volume too low; Incorrect input selected; Faulty cable/microphone. | Ensure power switch is ON; Increase master and input volumes; Verify correct input connection; Test with different cables/microphones. |
| Bluetooth mhux pairing | Beacon 2 not in pairing mode; Device too far; Interference. | Press Bluetooth pairing button; Move device closer to Beacon 2; Turn off other Bluetooth devices nearby. |
| Ħajja qasira tal-batterija | Batterija mhux iċċarġjata għalkollox; Batterija qadima. | Ensure full charge before use; Consider battery replacement if performance continues to degrade. |
Speċifikazzjonijiet
- Mudell: BEA2-XU4
- Output Wattage: 200 Watts
- Kelliema: 8 x 4-inch top speakers, 3 x 8-inch subwoofers
- Konnettività: Bluetooth, 2x Universal Microphone Jacks, 3.5mm Aux Input, 1/4-inch Aux Input
- Mikrofoni bla fili: Supports up to 4 wireless mics (via 2 dual receivers)
- Sors tal-Enerġija: Internal Rechargeable Batteries, AC Power
- Piż tal-oġġett: 52.1 Lira (23.6 kg)
- Dimensjonijiet tal-Prodott (Mitwija): Madwar 31.7 x 20.2 x 15.9 pulzieri (80.5 x 51.3 x 40.4 cm)
- Manifattur: Ankra Awdjo
- UPC: 819941015376
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official Anchor Audio webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
Anchor Audio Official Websit: www.anchoraudio.com
For further assistance, you may also contact the seller, Sticky the Skunk Productions, through the Amazon platform.
