1. Introduzzjoni
The Digitus DN-95117 is a high-performance 24-port 10G PoE+ Mid-Span hub, also known as a PoE injector. This device is designed to simplify network infrastructure by providing both data connectivity and electrical power to compatible devices over standard Ethernet cables. It features 24 input ports for data and 24 output ports that deliver both data and Power over Ethernet (PoE).
Each PoE output port supports devices compliant with IEEE802.3af (15.4 W) and IEEE802.3at (30 W) standards, making it suitable for powering various network devices such as PoE-enabled access points, IP phones, and IP cameras. The injector offers a robust maximum total power budget of 370 W across all ports, with a maximum of 30 W available per individual port.
2. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek. Jekk xi oġġetti huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek.
- 1 x 24-port 10G PoE+ Injector (Digitus DN-95117)
- 1 x Gwida Quick Start
- 1 x Kejbil tal-Enerġija
- Mounting Accessories (e.g., rack-mount brackets, screws, rubber feet)
Image 2.1: The Digitus DN-95117 PoE+ Injector shown with its power cable and mounting accessories.
3. Prodott Aktarview
The Digitus DN-95117 is designed for efficient and reliable power and data delivery in network environments. Its robust construction and comprehensive features ensure stable operation for various applications.
3.1 Karatteristiċi ewlenin
- 24-Port 10G Ethernet PoE+ Injector: Provides 24 data input ports and 24 data+PoE output ports.
- High Power Budget: Offers a total power budget of 370 Watts, with up to 30 Watts per port.
- Konformità Standard: Fully compatible with IEEE802.3af and IEEE802.3at PoE standards.
- Sejbien Awtomatiku: Features auto-MDI/MDI-X for cable detection and auto-detection of full-duplex/half-duplex modes.
- Protezzjoni minn Surge: Includes automatic surge protection for enhanced device safety.
- Operazzjoni Effiċjenti fl-Enerġija: Designed for optimized power consumption.
- Plug and Play: Proċess ta 'installazzjoni sempliċi.
Immaġni 3.1: Fuqview of the Digitus DN-95117 highlighting its key features such as 10 Gbps support, 100m transmission range, and 370 Watt PoE power budget.
3.2 Port Layout and Dimensions
The device features 24 data input ports and 24 data+PoE output ports on its front panel. The rear panel includes the power input socket and a power switch.
Immaġni 3.2: Dettaljata view of the Digitus DN-95117, illustrating the front panel with 24 data input and 24 data+PoE output ports, the rear panel with the power input socket, and overall dimensions (440mm L x 345mm W x 45mm H).
Stampa 3.3: Wara view of the Digitus DN-95117 showing the power input socket and power switch.
4. Istruzzjonijiet ta' Setup
Follow these steps to set up your Digitus DN-95117 PoE+ Injector:
- Spakkja l-Apparat: Carefully remove the PoE+ injector and all accessories from the packaging.
- Agħżel Post: Select a stable, well-ventilated location for the injector. Ensure it is away from direct sunlight, heat sources, and moisture. The device can be rack-mounted using the included accessories or placed on a flat surface.
- Connect Data Input: Connect your non-PoE network switch or router to the 24 data input ports on the front panel using standard Ethernet cables.
- Connect PoE Output: Connect your PoE-enabled devices (e.g., IP cameras, wireless access points, VoIP phones) to the 24 data+PoE output ports on the front panel using Ethernet cables. These cables will carry both data and power to your devices.
- Qabbad l-Enerġija: Connect the provided power cable to the power input socket on the rear panel of the injector, then plug the other end into a standard AC power outlet (100VAC ~ 240VAC).
- Qawwa Mixgħul: Flip the power switch on the rear panel to the 'ON' position. The device will power on, and indicator lights on the front panel will illuminate to show status.
- Ivverifika l-Konnessjoni: Check the status indicators for each connected port to ensure proper data and PoE connectivity to your devices.
Image 4.1: The Digitus DN-95117 can be integrated into various network setups, connecting a non-PoE switch to multiple PoE-powered devices.
5. Istruzzjonijiet Operattivi
Once the Digitus DN-95117 is set up, its operation is largely automatic. The device functions as a transparent data and power injector.
- Sejbien Awtomatiku tal-PoE: The injector automatically detects if a connected device is PoE-compatible and provides the appropriate power (IEEE802.3af or IEEE802.3at).
- Trażmissjoni tad-Data: Data is passed through the injector at Gigabit speeds (10/100/1000Mbps/2.5/10G) without modification.
- Indikaturi tal-Istat: Observe the LED indicators on the front panel for each port. These indicators typically show link status, activity, and PoE power status. Refer to the Quick Start Guide for specific LED behavior.
- Power Budget Management: The injector manages the total 370W power budget. If the total power demand from connected devices exceeds this budget, the injector may prioritize power delivery or shut down power to lower-priority ports. Ensure your total power consumption does not exceed 370W.
Image 5.1: The Digitus DN-95117 facilitates high-speed 10 Gbps data and power delivery to various network devices.
6. Manutenzjoni
The Digitus DN-95117 is designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Tindif: Żomm l-apparat nadif u ħieles mit-trab. Uża drapp artab u niexef għat-tindif. Tużax prodotti tat-tindif likwidi jew aerosol.
- Ventilazzjoni: Ensure that the ventilation openings are not blocked. Proper airflow is crucial for heat dissipation.
- Ġestjoni tal-Kejbil: Organize network cables to prevent strain on ports and ensure good airflow around the device.
- Aġġornamenti tal-Firmware: Periodically check the Digitus webgħal kwalunkwe aġġornament tal-firmware disponibbli. Segwi l-istruzzjonijiet ipprovduti bl-aġġornament bir-reqqa.
7 Issolvi l-problemi
If you encounter issues with your Digitus DN-95117, refer to the following common troubleshooting steps:
- Ebda Qawwa:
- Ensure the power cable is securely connected to both the injector and the power outlet.
- Verify the power switch on the rear panel is in the 'ON' position.
- Check the power outlet with another device to confirm it is functional.
- Ebda Konnessjoni tad-Dejta:
- Check all Ethernet cable connections between the source device, the injector's input ports, and the destination device.
- Ensure the Ethernet cables are not damaged and are correctly terminated.
- Verify the network devices connected to the injector are functioning correctly.
- No PoE Power to Device:
- Confirm the connected device is PoE-compatible (IEEE802.3af or IEEE802.3at).
- Check the PoE status LED for the specific port on the injector.
- Ensure the total power consumption of all connected PoE devices does not exceed the 370W budget. Disconnect some devices if necessary to test.
- Ipprova kejbil Ethernet differenti.
- Veloċità baxxa tan-Netwerk:
- Ensure all connected devices and cables support Gigabit Ethernet speeds.
- Check for network congestion or issues with other network components.
If problems persist after following these steps, please contact Digitus technical support.
8. Speċifikazzjonijiet
| Karatteristika | Deskrizzjoni |
|---|---|
| Numru tal-Mudell | DN-95117 |
| Brand | DIĠITU |
| Rata ta' Trasferiment tad-Data | 10/100/1000Mbps/2.5/10G (Gigabit Ethernet) |
| Numru ta' Portijiet | 24 (Data Input) + 24 (Data+PoE Output) |
| Standard PoE | IEEE802.3af, IEEE802.3at |
| Provvista ta 'Enerġija PoE | PIN 1,2(V-) and PIN 3,6(V+) |
| Maximum Total PoE Power | 370 Watts |
| Qawwa Massima Kull Port | 30 Watts |
| Standards tan-Netwerk | IEEE802.3, IEEE802.3u, IEEE802.3ab |
| Awto-Negozjar | Auto-MDI/MDI-X, Full-duplex/Half-duplex |
| Provvista tal-Enerġija | 100VAC ~ 240VAC |
| Temperatura operattiva | 0 °C sa 40 °C |
| Temperatura tal-Ħażna | -20 °C sa 70 °C |
| Dimensjonijiet (L x W x H) | 440 mm x 345 mm x 45 mm |
| Piż tal-oġġett | 4.4 Kilogrammi |
| MTBF (Mean Time Between Failures) | 100,000 sigħat |
| Konsum tal-Enerġija | 20W (idle) |
| Karatteristiċi Speċjali | Indikaturi LED |
| Tip ta' Prodott | 1U Rackmount |
| Tip ta' Interface | RJ45 |
| Pajjiż ta' Oriġini | Iċ-Ċina |
9. Garanzija u Appoġġ
DIGITUS products are known for their high quality and reliability. This product comes with a garanzija ta 'sena for spare parts availability.
For technical support, product information, or warranty claims, please visit the official DIGITUS website or contact your local distributor. You can find more solutions and information at the following link:
Image 9.1: DIGITUS brand information and link to solutions.
