AMS 405.57 1 1/2" x 12" Aluminum Liner User Manual

Introduzzjoni

This manual provides essential information for the proper use, maintenance, and care of your AMS 405.57 1 1/2" x 12" Aluminum Liner. This liner is designed for use with various 1-1/2" AMS core samplers, facilitating efficient and reliable sampġbir le.

Prodott Overview

AMS 1 1/2 inch by 12 inch aluminum liner

Deskrizzjoni tal-Immaġni: A single, cylindrical aluminum tube, approximately 12 inches in length, with an outer diameter of 1 1/2 inches. The surface appears brushed or slightly textured, indicative of aluminum material. Both ends are open, showing the hollow interior of the liner. This image illustrates the primary component of the AMS 405.57 product.

The AMS 405.57 Aluminum Liner is a precision-engineered component for soil and sediment sampling. It features a 1-1/2 inch outer diameter and a 12-inch length. The wall thickness is approximately 0.060 inches, providing a balance of durability and lightweight handling. This liner is specifically designed to integrate seamlessly with compatible AMS core samplers.

Karatteristiċi ewlenin:

Dimensjonijiet: 1 1/2" outer diameter x 12" length.
Materjal: High-quality aluminum construction.
Ħxuna tal-ħajt: Madwar 0.060 pulzieri.
Kompatibilità: Designed for use with various 1-1/2" AMS core samplers.
Oriġini: Manifatturat fl-Istati Uniti.

Setup

Before using the aluminum liner, ensure you have the appropriate AMS core sampler that is compatible with a 1-1/2 inch liner. The liner is intended to be inserted into the core sampler barrel to collect and retain soil or sediment samples.

Inspect the Liner: Carefully examine the aluminum liner for any signs of damage, dents, or deformities that could affect its performance or fit within the core sampler.
Clean the Liner: Ensure the interior and exterior of the liner are clean and free from debris, dirt, or residues from previous uses. Use a soft cloth and mild detergent if necessary, then rinse thoroughly and dry completely.
Prepare Core Sampler: Refer to your AMS core sampler's manual for specific instructions on preparing it for liner insertion. Ensure the sampler barrel is clean and free of obstructions.
Daħħal il-Liner: Gently slide the aluminum liner into the designated slot or barrel of your 1-1/2" AMS core sampler. Ensure it seats properly and securely. Do not force the liner, as this could cause damage to either the liner or the sampler.
Ivverifika l-Adattament: Once inserted, confirm that the liner is flush and stable within the core sampler, ready for sampling operazzjonijiet.

Istruzzjonijiet Operattivi

The aluminum liner functions as a disposable or reusable sleeve within a core sampler to preserve the integrity of collected samples. Its operation is directly tied to the use of the core sampler itself.

Attach Core Sampler: Assemble your AMS core sampler with the aluminum liner installed, following the sampler's specific instructions.
Perform Samplinarda: Use the core sampler as directed by its manual to collect the desired soil or sediment sample. The liner will fill with the sample as the sampler penetrates the ground.
Retrieve Sampler: Carefully extract the core sampler from the ground.
Remove Liner: Once the core sampler is retrieved, gently remove the aluminum liner containing the sample. This may involve detaching the sampler's cutting tip or other components as per your sampler's design.
Seal Sample: Jekk is-sample is to be transported or stored, cap both ends of the liner immediately to prevent sample loss, contamination, or disturbance. Use appropriate end caps or sealing methods.
Label Liner: Clearly label the liner with all necessary sample identification information (e.g., date, time, location, depth, project ID).

Nota: Always refer to the specific operating instructions of your AMS core sampler for detailed sampling procedures. The aluminum liner is a passive component designed to hold the sample.

Manutenzjoni

Proper maintenance extends the life of your aluminum liner, especially if intended for multiple uses, and ensures sample integrità.

Tindif: After each use, if the liner is to be reused, thoroughly clean both the interior and exterior. Remove all soil, sediment, or other residues. Use warm water and a mild, non-abrasive detergent. A brush designed for tube cleaning may be helpful.
Tlaħliħ: Rinse the liner thoroughly with clean water to remove all detergent residue.
Tnixxif: Allow the liner to air dry completely before storage. Ensure no moisture remains inside, as this could lead to corrosion or contamination.
Spezzjoni: Regularly inspect the liner for any signs of wear, corrosion, dents, or structural damage. Even minor deformities can affect its fit and the quality of sampġbir le.
Ħażna: Store liners in a clean, dry environment, away from corrosive chemicals or extreme temperatures. Keep them protected from physical impact that could cause bending or denting.

Issolvi l-problemi

This section addresses common issues that may arise during the use of your aluminum liner.

Problema	Kawża Possibbli	Soluzzjoni
Liner does not fit into core sampler.	Incorrect liner size. Liner is dented or deformed. Core sampler barrel is obstructed or damaged.	Verify liner dimensions (1 1/2" OD) against sampler specifications. Inspect liner for damage; replace if necessary. Clean and inspect core sampler barrel.
Sample is difficult to extract from liner.	Compacted sample. Rough interior surface of liner (due to wear or damage).	Uża s xierqaample extrusion tools. Consider replacing the liner if interior surface is compromised.
Liner gets stuck in core sampler.	Liner or sampler barrel is dirty. Liner is slightly deformed. Excessive force during insertion.	Clean both components thoroughly. Inspect liner for subtle deformities; replace if needed. Always insert gently.

Speċifikazzjonijiet

Attribut	Dettall
Numru tal-Mudell	405.57
Dijametru ta' Barra	1 1/2 pulzieri (madwar 3.81 ċm)
Tul	12 pulzier (madwar 30.48 ċm)
Ħxuna tal-ħajt	Approximately 0.060 inches (approx. 1.52 mm)
Materjal	Aluminju
Piż approssimattiv	Lira waħda (madwar 0.45 kg)
Dimensjonijiet tal-Pakkett	14 x 4 x 4 pulzieri
Manifattur	AMS Incorporated
Pajjiż ta' Oriġini	Istati Uniti
Data L-Ewwel Disponibbli	12 ta’ Diċembru 2017

Garanzija u Appoġġ

Specific warranty information for the AMS 405.57 Aluminum Liner is not provided in this document. For details regarding product warranty, technical support, or replacement parts, please contact AMS Incorporated directly through their official webkanali tas-sit jew tas-servizz tal-konsumatur.

Manifattur: AMS Incorporated

Please refer to the manufacturer's official resources for the most current support information.

	Manwal tal-Kit tal-Evalwazzjoni tal-Bord tal-Adapter tal-ams AS5600L Dan il-manwal jipprovdi informazzjoni komprensiva għall-bord tal-adapter ams AS5600L-WL_EK_AB, inkluż il-kontenut tal-kit, id-deskrizzjoni tal-bord, l-istruzzjonijiet tal-immuntar, id-dettalji tal-pinout, it-tħaddim fil-modalità I2C, l-iskematiċi tal-ħardwer, it-tqassim tal-PCB, u informazzjoni dwar l-ordnijiet.
	Manwal tal-Utent tas-Sensor tal-Pożizzjoni Rotatorja ta' 14-bit ams AS5048 Dan il-manwal tal-utent jipprovdi informazzjoni dettaljata dwar l-ams AS5048, sensur tal-pożizzjoni rotatorja ta' 14-bit b'angolu diġitali u output PWM. Ikopri l-bord tal-adapter AS5048, l-immuntar, il-pinout, il-każijiet ta' operazzjoni (SPI, Daisy Chain), il-kodifikazzjoni tal-firmware exampfajls, u skemi tal-ħardwer. Essenzjali għall-inġiniera li jintegraw dan is-senser fis-sistemi tagħhom.
	Manwal tal-Kit tal-Evalwazzjoni tal-Bord tal-Adapter ams AS5048 Dan il-manwal jagħti dettalji dwar l-ams AS5048 Adapter Board (AS5048-EK-AB), kit ta' evalwazzjoni għas-sensor tal-pożizzjoni manjetika AS5048. Ikopri l-ħardwer, il-modi ta' operazzjoni (SPI, I2C), u s-softwer...amples, u informazzjoni ta' kuntatt għal ams AG.
	Manwal tal-Kit tal-Evalwazzjoni tal-Bord tal-Adapter ams AS5048 User manual for the ams AS5048 Adapter Board Evaluation Kit (AS5048-EK-AB), detailing its features, pinout, mounting, operation cases (SPI modes), hardware schematics, PCB layout, and contact information.
	Istruzzjonijiet tal-Operazzjoni tal-Arloġġ tal-Ħajt tal-AMS Istruzzjonijiet operattivi għall-arloġġi tal-ħajt tal-AMS, li jkopru l-installazzjoni tal-batteriji, is-sostituzzjoni, u l-użu ġenerali f'diversi lingwi.
	Gwida għall-Utent tat-TSL2521 EVM: Kit ta' Evalwazzjoni tas-Sensor tad-Dawl Ambjentali Gwida għall-utent għall-ams TSL2521 EVM, li tiddeskrivi l-karatteristiċi tiegħu bħala sensur tad-dawl ambjentali sensittiv ħafna b'sejbien selettiv ta' teptip u s veloċiampling għall-użu wara OLED jew awżiljarju għall-kamera. Jinkludi deskrizzjonijiet tal-ħardwer u s-softwer, is-setup, u informazzjoni legali.

AMS 405.57