1. Introduzzjoni
The Sonodyne SRP 500 is a compact near-field active reference monitor designed for professional audio environments. It features a pressure die-cast aluminum enclosure for maximum rigidity and a unique form factor. This monitor is engineered to accurately reproduce audio, excelling at monitoring subtle effects and details within a mix. Its advanced design includes a custom waveguide for the tweeter and a robust Kevlar woofer, ensuring a wide, detailed soundstage and exceptional transient response.
Figura 1.1: Quddiem view of the Sonodyne SRP 500 Active Studio Monitor, showcasing its compact design and speaker components.
2. Karatteristiċi ewlenin
- Rigid Aluminium Die-Cast Enclosure: Maximizes rigidity and provides a durable, unique form.
- Klassi AB Bi-ampaktar ħaj: A new 50 + 50 watt bi-amplifier optimally drives the transducers, providing adequate headroom and dynamics.
- 5.25" Kevlar Woofer & 1" HF Tweeter: The 5.25-inch Kevlar woofer delivers deep bass and exceptional transient response, while the 1-inch silk dome tweeter is nested in a custom waveguide for on and off-axis linearity.
- Discrete EQ in 0.75 dB Steps: DSP-based internal processing provides 0.75dB step calibrated HF and LF room compensation EQs at the rear panel.
- Internal DSP Balance: Ensures precise audio processing and crossover functionality.
- High Maximum SPL: Measures an impressive 104dB.
- Inputs versatili: Accepts both XLR and TRS balanced inputs.
- Għażliet ta 'Immuntar: Tapped inserts at the rear and bottom allow for various mounting configurations.
3. Konfigurazzjoni u Konnessjonijiet
3.1 Spakkjar u Tqegħid
Carefully remove the SRP 500 monitor from its packaging. Place the monitor on a stable, flat surface, such as a desk or speaker stand. Ensure adequate ventilation around the unit. For optimal stereo imaging, position the monitors equidistant from your listening position, forming an equilateral triangle.
3.2 Panel ta' wara Overview u Konnessjonijiet
The rear panel of the SRP 500 houses all input connections and equalization controls. Refer to the image below for a visual guide.
Figure 3.1: Rear panel of the Sonodyne SRP 500, detailing input connections and EQ settings.
- Konnessjonijiet tad-dħul: The SRP 500 supports both balanced XLR and 1/4-inch TRS inputs. Connect your audio source (e.g., audio interface, mixer) to the appropriate input.
- Input XLR: For balanced connections, ensuring minimal noise interference.
- Input TRS: For balanced 1/4-inch connections.
- Dħul AC: Connect the provided power cable to this inlet. Ensure the correct voltage (230V, 50Hz) is supplied.
3.3 Room Compensation EQ Settings
The SRP 500 features DSP-based room compensation EQs on the rear panel to optimize sound reproduction for your specific acoustic environment. These EQs are calibrated in 0.75dB steps.
- Low Shelving EQ: Adjusts the low-frequency response. Useful for compensating for bass buildup in small rooms or when monitors are placed close to walls.
- Bass Roll-Off: Reduces bass output, particularly useful when integrating with a subwoofer or in rooms with excessive low-end resonance.
- High Shelving EQ: Adjusts the high-frequency response. Can be used to compensate for overly bright or dull room acoustics.
Experiment with these settings to achieve the most accurate and balanced sound in your listening space. Start with all EQs set to flat (0dB) and make small adjustments while listening to familiar reference tracks.
4. Istruzzjonijiet Operattivi
4.1 Tixgħel/Jitfi
Connect the power cable to the AC inlet on the rear panel and then to a suitable power outlet. The power switch is located on the front panel. Press it to turn the monitor on or off. It is recommended to power on your monitors after your audio source and power them off before your audio source to prevent pops or clicks.
4.2 Kontroll tal-Livell
The front panel features a level control knob. This knob ranges from mute to +6dB, with a center detent at 0dB. Adjust this control to set the desired output volume. For critical listening, it is often recommended to set the monitor's level control to 0dB and manage the overall volume from your audio interface or mixer.
Figure 4.1: Front panel controls including the power switch and level knob.
5. Manutenzjoni
To ensure the longevity and optimal performance of your Sonodyne SRP 500 monitors, follow these maintenance guidelines:
- Tindif: Use a soft, dry cloth to wipe down the exterior of the monitor. For stubborn marks, a slightly damp cloth can be used, but ensure no liquid enters the speaker grilles or control knobs. Avoid abrasive cleaners or solvents.
- Protezzjoni mit-Trab: When not in use for extended periods, consider covering the monitors to protect them from dust accumulation.
- Ventilazzjoni: Ensure that the rear heat sink and bass port are not obstructed to allow for proper airflow and prevent overheating.
- Kundizzjonijiet Ambjentali: Avoid exposing the monitors to extreme temperatures, high humidity, or direct sunlight.
6 Issolvi l-problemi
If you encounter issues with your SRP 500 monitors, refer to the following common troubleshooting steps:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda Output tal-Ħoss |
|
|
| Ħoss Mgħawġ |
|
|
| Ħoss ta' Żanżin jew Buzz |
|
|
If the problem persists after trying these steps, please contact Sonodyne customer support.
7. Speċifikazzjonijiet Tekniċi
| Speċifikazzjoni | Dettall |
|---|---|
| Isem tal-Mudell | SRP 500 |
| Tip ta' Kelliem | Monitor, Tweeter, Bookshelf |
| Dijametru tal-Woofer | 5.25 Inches (Kevlar) |
| Dijametru tat-Tweeter | 1 Pulzier (Koppla tal-Ħarir) |
| Ampitwal Tip | Klassi AB Bi-ampaktar ħaj |
| Output ta 'Qawwa | 100W (50W + 50W) |
| SPL massimu | 104 dB |
| Teknoloġija tal-Konnettività | XLR, TRS |
| Materjal | Aluminium Die-Cast Enclosure |
| Kulur | Griż |
| Dimensjonijiet tal-Prodott (LxWxH) | 18.1 x 21 x 27.9 ċm |
| Piż tal-oġġett | 6.8 Kilogrammi |
| Tip ta 'Immuntar | Tabletop Mount (with tapped inserts for other options) |
| Pajjiż ta' Oriġini | Indja |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
The Sonodyne SRP 500 Active Studio Monitor comes with a 1 Snin Garanzija mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u kwistjonijiet li jirriżultaw minn użu normali. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. For detailed warranty terms and conditions, please refer to the documentation provided with your product or contact Sonodyne customer service.
8.2 Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Sonodyne customer support. You can find contact information on the official Sonodyne webis-sit jew permezz tan-negozjant awtorizzat tiegħek.
When contacting support, please be prepared to provide your product model (SRP 500), serial number (if applicable), and a detailed description of the issue you are experiencing.
