NITECORE LR10 250 Lumen USB Rikargabbli tal-but ĊampManwal tal-Utent tad-Dawl tal-Utilità/Installazzjoni

Introduzzjoni

Thank you for choosing the NITECORE LR10. This compact and versatile light is designed for camping, utility, and everyday use, offering reliable illumination with convenient USB recharging. This manual provides detailed instructions for its proper use, maintenance, and safety.

Immaġni: Quddiem view of the NITECORE LR10, featuring a panda-themed diffuser and a central power button.

Karatteristiċi Ewlenin

• Utilizes 9 high CRI LEDs (CRI90, 4500K color temperature) for a maximum output of 250 lumens.
• Built-in 1200mAh Li-ion battery.
• Micro-USB rechargeable with an integrated intelligent charging circuit.
• Single switch control for 3 brightness levels and 3 special modes.
• Highly translucent PC diffuser for well-distributed light.
• Built-in power indicator to report remaining battery power.
• Magnetic base and metal loop for versatile mounting options.
• Constructed from durable PC materials.
• Waterproof in accordance with IP66 rating.
• Impact resistant up to 1.5 meters.

Image: Visual representation of the LR10's features, including its use inside a camping tinda.

Setup

Iċċarġjar Inizjali

Before first use, fully charge the NITECORE LR10. The device comes with a built-in 1200mAh Li-ion battery.

1. Locate the Micro-USB charging port on the side of the LR10.
2. Connect the included USB cable to the LR10's Micro-USB port.
3. Connect the other end of the USB cable to a USB power source (e.g., USB adapter, power bank, computer USB port, or solar panel).
4. The built-in power indicator will show the charging status. Refer to the "Power Indication" section for details.
5. Charging is complete when the indicator shows a steady full charge status.

Immaġni: Dettaljata view of the LR10's Micro-USB charging port and examples of compatible charging devices.

The LR10 supports continuous illumination even while charging, allowing for extended use when connected to a power source.

Image: The LR10 providing light while actively charging via its USB connection.

Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

• Biex Tixgħel: Agħfas u żomm il-buttuna tal-qawwa għal madwar sekonda.
• Biex Tintefa: While the light is on, press and hold the power button for approximately 1 second.

Brightness Levels and Special Modes

The LR10 features 3 brightness levels (Low, Mid, High) and 3 special modes (Caution Light, SOS, Beacon).

• Nibdlu l-luminożità: With the light on, short press the power button to cycle through Low, Mid, High.
• Activating Special Modes:
  • Caution Light: From any state (on or off), double-press the power button rapidly to activate the Caution Light.
  • SOS / Beacon: While in Caution Light mode, short press the power button to cycle through SOS and Beacon modes.
  • Exiting Special Modes: Press and hold the power button for approximately 1 second to turn off the light, or short press to return to the last used brightness level (if activated from an 'on' state).

Indikazzjoni tal-Enerġija

The built-in power indicator reports the remaining battery power. The indicator also doubles as a location signal when the light is off.

• While On: The indicator will show battery status (specific patterns not detailed in provided data, refer to official Nitecore manual for exact patterns).
• While Off (Location Signal): The indicator may flash periodically to help locate the device in the dark.

Għażliet ta 'Immuntar

The LR10 is equipped with a magnetic base and a metal loop for versatile mounting:

• Bażi manjetika: Attach the LR10 to any ferrous metal surface for hands-free illumination.
• Metal Loop: Use the integrated metal loop to hang the light from hooks, branches, or carabiners.

Manutenzjoni

Tindif

To maintain optimal performance, keep the LR10 clean. Wipe the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the PC diffuser or housing.

Kura tal-batterija

The LR10 uses a built-in Li-ion battery. To prolong battery life:

• Evita li tiċċarġja l-batterija kompletament ta' spiss.
• Charge the battery regularly, even if not in use, to prevent deep discharge.
• Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża għal perjodi twal.
• The LR10's rechargeable battery system is designed for over 500 charge cycles, contributing to environmental protection by reducing discarded primary batteries.

Image: Infographic highlighting the environmental advantages of the LR10's rechargeable battery.

Issolvi l-problemi

• Id-dawl ma jixgħelx:
  • Kun żgur li l-batterija hija ċċarġjata. Qabbad ma' sors ta' enerġija USB u ċċekkja l-indikatur tal-iċċarġjar.
  • Press and hold the power button for 1 second to turn on.
• Id-dawl mhux qed jiċċarġja:
  • Check the USB cable for damage and ensure it is securely connected to both the LR10 and the power source.
  • Ipprova sors ta' enerġija USB jew kejbil differenti.
  • Ensure the power source is active and providing power.
• Dawl baxx jew teptip:
  • Il-batterija tista' tkun baxxa. Erġa' ċċarġja l-apparat.
  • Ensure the diffuser is clean.

Speċifikazzjonijiet

Image: Detailed specifications table for the NITECORE LR10.

Note: Stated data is measured in laboratory conditions. End-user results may vary due to individual usage habits and environmental factors.

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

The NITECORE LR10 comes with a warranty card. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage details. Keep your purchase receipt for warranty claims.

Appoġġ għall-Klijent

For further assistance, technical support, or warranty inquiries, please contact Nitecore customer service or visit the official Nitecore websit:

www.nitecore.com