Introduzzjoni
Welcome to your new Gami Moka H66250 sliding door wardrobe. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your wardrobe to ensure long-lasting use and satisfaction. Please read these instructions carefully before beginning assembly or use.
Informazzjoni dwar is-Sigurtà
L-aderenza ma' dawn il-linji gwida tas-sigurtà hija kruċjali biex jiġu evitati korrimenti u ħsara lill-prodott.
- Assemblea ta' Żewġ Persuni: Due to the size and weight of the wardrobe (approximately 219 kg), assembly must be performed by at least two adults.
- Ankraġġ tal-ħajt: For stability and safety, especially in homes with children, it is highly recommended to secure the wardrobe to a wall using appropriate anti-tip hardware (not included, but essential for tall furniture).
- Tfal u Pets: Żomm it-tfal u l-annimali domestiċi 'l bogħod miż-żona tal-assemblaġġ. Partijiet żgħar jistgħu jkunu perikolużi biex wieħed jifga.
- Heavy Components: Exercise caution when handling heavy panels and components to avoid personal injury.
- Għodda xierqa: Use the correct tools as specified in the assembly instructions.
- Wiċċ Livell: Assemble the wardrobe on a clean, flat, and stable surface to prevent damage and ensure proper alignment.
Kontenut tal-Pakkett
Before beginning assembly, carefully unpack all components and verify that all parts are present and undamaged. Refer to the parts list provided with your specific product packaging.
- Pannelli tal-gwardarobba (tal-ġenb, ta' fuq, ta' isfel, ta' wara)
- Sliding door panels (including mirrored door)
- Internal partitions and shelf supports
- Xkafef aġġustabbli
- Hanging rails
- Sliding door mechanisms and rollers
- Ħardwer tal-assemblaġġ (viti, kavilji, konnetturi, eċċ.)
Istruzzjonijiet ta' Twaqqif u Assemblaġġ
The Gami Moka H66250 wardrobe requires assembly. Due to its significant size and weight, assembly by two adults is strongly recommended. For optimal results and to ensure proper functionality, professional assembly is advised.
Għodod Meħtieġa
- Tornavit tar-ras Phillips
- Tornavit Flathead
- Martell
- Tejp tal-kejl
- Livell ta' l-ispirtu
- Drill (for wall anchoring, if applicable)
General Assembly Steps
While specific detailed steps are provided in the packaging, the general assembly sequence is as follows:
- Iftaħ u Identifika: Lay out all components and hardware. Compare them with the parts list to ensure everything is present.
- Arma l-Qafas tal-Bażi: Construct the base and top frames of the wardrobe.
- Waħħal il-Panelli tal-Ġenb u ta' Wara: Secure the side panels to the base and top frames. Install the back panels to square the structure.
- Install Internal Structure: Insert internal partitions, shelf supports, and hanging rails according to your desired configuration.
- Poġġi l-Ixkafef: Position the adjustable shelves in the central section.
- Mount Sliding Door Mechanisms: Attach the upper and lower tracks for the sliding doors.
- Installa Bibien li Jiżżerżqu: Carefully lift and place the sliding doors onto their respective tracks. Adjust as necessary for smooth operation.
- Ankraġġ tal-ħajt: Secure the wardrobe to the wall using appropriate hardware to prevent tipping.

Figure 1: The Gami Moka H66250 two-door sliding wardrobe in a wood finish. This image shows the overall aesthetic and design of the assembled unit.
Istruzzjonijiet Operattivi
Bibien li jiżżerżqu
The Gami Moka H66250 wardrobe features two sliding doors equipped with soft-close mechanisms for quiet and gentle operation.
- Ftuħ: To open a door, gently slide it horizontally along its track in the desired direction.
- Għeluq: To close a door, push it until the soft-close mechanism engages. The door will then smoothly and silently glide into its fully closed position. Avoid forcing the doors.
Xkafef aġġustabbli
The central section of the wardrobe includes 10 adjustable shelves (five on each side of the central partition), allowing you to customize storage space.
- Aġġustament tal-Għoli: To change a shelf's height, first remove any items from the shelf. Then, lift the shelf and remove the shelf pins from their current holes. Reposition the pins into the desired holes at the new height, ensuring they are level, and place the shelf back onto the pins.

Figure 2: Dimensions of the Gami Moka H66250 wardrobe. The wardrobe measures 220 cm in height, 249 cm in width, and 63 cm in depth.
Manutenzjoni u Kura
Regular maintenance will help preserve the appearance and functionality of your Gami Moka H66250 wardrobe.
Tindif
- Finitura tal-Injam: For the charcoal oak imitation paper coating, wipe surfaces with a soft, slightly damp cloth. Immediately dry with a clean, dry cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
- Mera: Clean the mirror surface with a standard glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
Kura Ġenerali
- Fittings: Periodically check all screws, bolts, and fittings for tightness. Re-tighten if necessary to maintain structural integrity.
- Binarji li jiżżerżqu: Ensure the sliding door tracks are kept clean and free from dust, debris, or obstructions to maintain smooth and silent operation.
- Protezzjoni tal-wiċċ: Avoid placing hot or wet items directly on the wardrobe surfaces. Use coasters or protective mats when necessary.
- Espożizzjoni għad-dawl tax-xemx: L-espożizzjoni fit-tul għad-dawl tax-xemx dirett tista' tikkawża li l-finitura titlef il-kulur jew titlef il-kulur.
Issolvi l-problemi
This section addresses common issues you might encounter with your wardrobe.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Doors do not slide smoothly | Debris in tracks, misaligned rollers, loose fittings | Clean tracks thoroughly. Check roller alignment and adjust if needed. Ensure all door mechanism fittings are tight. |
| Il-bibien ma jingħalqux kompletament | Obstruction in the track, soft-close mechanism issue, wardrobe not level | Remove any obstructions. Inspect the soft-close mechanism for damage. Verify the wardrobe is on a level surface. |
| Wardrobe feels unstable or wobbly | Loose assembly fittings, not secured to wall, uneven floor | Tighten all assembly screws and bolts. Ensure the wardrobe is securely anchored to the wall. Use shims if the floor is uneven. |
| L-ixkafef mhumiex livellati | Shelf pins incorrectly inserted, unevenly distributed weight | Ensure shelf pins are fully inserted into corresponding holes at the same height. Redistribute weight evenly on the shelf. |

Figura 3: A view of the Gami Moka H66250 wardrobe, showcasing the mirrored door on the left side and the wood-finished doors on the right.
Speċifikazzjonijiet
Detailed specifications for the Gami Moka H66250 Sliding Door Wardrobe.
| Karatteristika | Dettall |
|---|---|
| Brand | GAMI |
| Numru tal-Mudell | H66250 |
| Dimensjonijiet (Fond x Wisa 'x Għoli) | 63 ċm x 249 ċm x 220 ċm |
| Piż | Madwar 219 kg |
| Materjal | Particle board with charcoal oak imitation paper coating, 2 mm ABS edges |
| Bibien | 2 Sliding Doors with Soft-Close Mechanism |
| Konfigurazzjoni Interna | 2 hanging sections (on outer sides), 10 adjustable shelves (2x5 in central section) |
| Karatteristiċi Speċjali | Integrated mirror, easy-care coating, French manufacturing |

Figure 4: A different perspective of the Gami Moka H66250 wardrobe, showing the mirrored door on the right side.
Garanzija u Appoġġ
GAMI products are manufactured to high-quality standards. For specific warranty details regarding your Gami Moka H66250 wardrobe, please refer to the warranty information provided with your purchase documentation or contact your retailer.
For assistance with assembly, missing parts, or any other product-related inquiries, please contact your authorized GAMI retailer or GAMI customer support directly. Please have your model number (H66250) and purchase information ready when contacting support.





