Manwal tal-Utent tad-Dawl Immuntat fil-Lanċ ta' 11-il Pulzier ta' Project Source

Introduzzjoni

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Informazzjoni dwar is-Sigurtà

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess ta 'installazzjoni.
Tinstallax dan l-apparat f'postijiet imxarrba jew ħfief.amp postijiet.
Ensure all wires are properly connected and secured to prevent short circuits.
Taqbiżx il-wat massimutage specified for this fixture.
Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

Project Source 11-Inch Flush Mount Light Fixture (2 units)
Mounting Hardware Kit (screws, wire nuts)
Manwal ta 'Istruzzjoni (dan id-dokument)

Project Source 11-Inch Flush Mount Light packaging box

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Setup u Installazzjoni

Għodod Meħtieġa (Mhux Inklużi):

Tornavit tar-ras Phillips
Strippers tal-Wajer
Tejp Elettriku (mhux obbligatorju)
Nuċċalijiet tas-Sigurtà

Passi ta' Installazzjoni:

Itfi l-Enerġija: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
Neħħi l-Apparat il-Qadim (jekk applikabbli): Carefully remove any existing light fixture, noting the wiring connections.
Ipprepara l-Wajers: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
Qabbad Wajers:
- Qabbad il- iswed wajer mill-apparat sal- iswed (hot) wire from the ceiling box using a wire nut.
- Qabbad il- abjad wajer mill-apparat sal- abjad (neutral) wire from the ceiling box using a wire nut.
- Qabbad il- ram aħdar jew mikxuf ground wire from the fixture to the ram aħdar jew mikxuf ground wire from the ceiling box using a wire nut.
Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
Fixture tal-Immonta: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
Irrestawra l-Enerġija: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Two Project Source 11-Inch Flush Mount Lights with brushed nickel finish and frosted glass diffusers

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Istruzzjonijiet Operattivi

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Manutenzjoni

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

Tindif: Qabel ma tnaddaf, kun żgur li l-provvista tal-enerġija lill-apparat tkun mitfija mis-circuit breaker. Uża drapp artab, niexef, jew kemxejn imxarrab.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
Kura tal-ħġieġ: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
Ebda Sostituzzjoni tal-Bozza: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Issolvi l-problemi

If your light fixture is not functioning as expected, consult the following common issues and solutions:

Problema	Kawża Possibbli	Soluzzjoni
Id-dawl ma jixgħelx.	L-ebda qawwa għall-apparat. Konnessjonijiet tal-wajer sfużi. Swiċċ tal-ħajt difettuż.	Iċċekkja circuit breaker/fjus. Kun żgur li l-konnessjonijiet tal-wajers kollha huma sikuri (itfi l-elettriku l-ewwel!). Ittestja s-swiċċ tal-ħajt jew ibdel jekk meħtieġ.
Id-dawl teptip jew jitbaxxa.	Konnessjonijiet tal-wajer sfużi. Swiċċ tad-dimmer inkompatibbli (jekk applikabbli). Overheating (unlikely for LED).	Check and tighten all wire connections (power off first!). Kun żgur li s-swiċċ tad-dimmer huwa kompatibbli mal-attrezzaturi LED. Żgura ventilazzjoni xierqa madwar l-apparat.
Glass diffuser is loose.	Improperly secured.	Re-secure the glass diffuser according to installation steps.

If the problem persists after trying these solutions, contact a qualified electrician or customer support.

Speċifikazzjonijiet

Karatteristika	Dettall
Brand	Sors tal-Proġett
Mudell	11-Inch Flush Mount Light (2-Pack)
Dimensjonijiet tal-Prodott	11 x 11 x 3 pulzieri
Piż tal-oġġett	4.1 liri
Materjal	Ħġieġ
Wat Kompatibbli Massimutage	120 Watts
Tip ta 'Bozza	LED integrat
Stil	Klassiku

Garanzija u Appoġġ

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.

	Project Source 2-Inch Cordless Blind Assembly and User Manual Detailed guide for the Project Source 2-inch cordless blind, covering package contents, hardware, preparation, assembly (inside/outside mount), operation, care, maintenance, and warranty.
	Istruzzjonijiet għall-Assemblaġġ ta' Rukkell tal-Pajp Imwaħħal mal-Ħajt għal Dazju Tqil Istruzzjonijiet tal-assemblaġġ għar-Rukkell tal-Pajp Imwaħħal mal-Ħajt Heavy-Duty, iddisinjat għal ħażna effiċjenti tal-pajp.
	Istruzzjonijiet tal-Assemblaġġ u l-Operazzjoni ta' Blind mingħajr Fili ta' 2 Pulzieri ta' Project Source Gwida komprensiva għall-assemblaġġ, it-tħaddim, u l-manutenzjoni tal-Project Source 2-Inch Cordless Blind tiegħek. Tinkludi lista tal-partijiet, informazzjoni dwar il-garanzija, u struzzjonijiet għall-kura.
	Round Toilet Seat Installation Guide - Project Source Easy-to-follow instructions for installing a Project Source Round Toilet Seat. Includes parts list, hardware details, and assembly steps.
	Gwida għall-Installazzjoni ta' Faucet tal-Utilità b'2 Mankijiet ta' Project Source (Mudell 3310-250-RB-LZ) Dan id-dokument jipprovdi struzzjonijiet dwar l-installazzjoni, it-tħaddim, il-kura, u s-soluzzjoni tal-problemi għall-Project Source 2-Handle Utility Faucet, Mudell 3310-250-RB-LZ. Jinkludi l-kontenut tal-pakkett, twissijiet ta' sigurtà, speċifikazzjonijiet tal-prodott, u informazzjoni dwar il-garanzija.
	Project Source FJ10-102 Flushmount Ceiling Fixture Installation Guide Official installation guide for the Project Source FJ10-102 flushmount ceiling fixture. Includes package contents, hardware, safety information, assembly steps, troubleshooting, and warranty details.

Project Source 11-Inch Flush Mount Light (2-Pack)