Introduzzjoni
This manual provides essential information for the proper setup, operation, and maintenance of your POS Corded Black No Dial Telephone. This telephone is specifically designed for incoming calls only, making it ideal for environments where outbound dialing is not required, such as hotel lobbies, car rental agencies, or public areas. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Informazzjoni dwar is-Sigurtà
- Tesponix it-telefon għall-ilma jew għal umdità eċċessiva.
- Avoid placing the telephone near heat sources or direct sunlight.
- Use only the provided cords.
- Do not attempt to open or repair the telephone yourself. Refer all servicing to qualified personnel.
- Żomm fejn ma jintlaħaqx mit-tfal żgħar.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- POS Corded Black No Dial Telephone Unit
- Kurdun ta' l-idejn f'koljaturi
- Line Cord (for connection to wall jack)
Setup
- Qabbad il-Handset: Plug one end of the coiled handset cord into the handset and the other end into the designated jack on the telephone base.
- Qabbad mal-Linja tat-Telefon: Plug one end of the line cord into the "LINE" jack on the back or side of the telephone base. Plug the other end of the line cord into a standard telephone wall jack (RJ11).
- Pjazzament: Place the telephone on a stable, flat surface. Ensure the metal base is secure.
Istruzzjonijiet Operattivi
This telephone is designed exclusively for receiving incoming calls.
- Jirċievu Sejħa: When the telephone rings, lift the handset from the base to answer the call.
- Tmiem Sejħa: Place the handset back onto the base to end the call.
- Ringer Control: The telephone features a real bell ringer. Locate the ringer ON/OFF switch, usually on the side or bottom of the base, to enable or disable the ringing sound.
- Handset Volume Control: Adjust the volume of the incoming audio during a call using the volume control switch or slider located on the handset.
- Dataport: The integrated dataport allows for connection of other devices, such as a modem or fax machine, if needed.
Manutenzjoni
- Tindif: Imsaħ it-telefon b'ċarruta ratba, damp drapp. Tużax tindif jew solventi li joborxu.
- Kura tal-kurdun: Avoid tangling or stretching the cords excessively to prevent damage.
- Ħażna: If storing the telephone for an extended period, disconnect it from the wall jack and store it in a cool, dry place.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No ring when a call comes in. | Ringer switch is OFF. | Locate the ringer ON/OFF switch and set it to ON. |
| Ma nistax nisma' lil min qed iċempel jew min qed iċempel ma jistax jismagħni. | Cords are not properly connected; Handset volume is too low. | Ensure all cords are securely plugged in. Adjust the handset volume control. |
| No dial tone (though this phone is incoming only, a basic line check). | Telephone line issue; Cord not connected. | Check if the line cord is securely connected to the wall jack. Test the wall jack with another working phone if possible. Contact your telephone service provider if the issue persists. |
Speċifikazzjonijiet
- Mudell: B0778JDG2P
- Ditta: POS
- Kulur: Iswed
- Tip tat-Telefon: Corded, No Dial
- Materjal: Bażi tal-metall
- Sors tal-Enerġija: Elettriku bil-Fili (Imħaddem bil-Linja)
- Netwerks Kompatibbli: PSTN, Landline Networks
- Operazzjoni: Incoming Calls Only, Single-Line Operation
- Karatteristiċi: Real Bell Ringer (On/Off), Handset Volume Control, Dataport
Garanzija u Appoġġ
For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer, POS. Keep your purchase receipt as proof of purchase.
For general inquiries, you may visit the product page on Amazon: amazon.com/dp/B0778JDG2P
