Introduzzjoni
The Zazu Bibi the Bunny is a musical soft toy designed to comfort and soothe infants. It features a sound module that mimics a mother's heartbeat, plays various melodies, and includes a cry sensor to activate sounds when your baby needs reassurance. This manual provides essential information for the safe and effective use of your Zazu Bibi the Bunny.

Image: Zazu Bibi the Bunny soft toy with its removable sound module visible in the center.
Kontenut tal-Pakkett
- 1 x Zazu Bibi the Bunny Soft Toy
- 1 x Modulu tal-Ħoss
- 1 x Manwal tal-Istruzzjonijiet (dan id-dokument)
Setup
Installazzjoni tal-batterija
- Locate the sound module inside the soft toy.
- Carefully remove the sound module from the toy.
- Open the battery compartment on the sound module.
- Insert 3 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity.
- Agħlaq il-kompartiment tal-batterija sew.
- Place the sound module back into the soft toy.

Image: Hands demonstrating the removal of the sound module from the soft toy for battery installation or washing.
Istruzzjonijiet Operattivi
Funzjonijiet tal-Ħoss
The Zazu Bibi the Bunny offers 6 different sounds to comfort your baby:
- Womb sound with heartbeat
- Waterfall sound (white noise)
- 4 soothing melodies

Image: Bibi the Bunny positioned near a baby in a crib, illustrating the musical feature with a note icon and text "6 Melodies".
Activating Sounds
To activate the sound module, gently shake the soft toy. It will automatically play the last chosen sound.
Kontroll tal-Volum
Adjust the volume to your preferred level using the controls on the sound module.
Sensor Cry
The integrated voice-activated sound sensor will detect if your baby starts crying and automatically switch on the sound to soothe them.

Image: Bibi the Bunny hanging on a crib, with a cry sensor icon and text "Cry sensor: music can activate upon crying".
Timer tat-Tfigħ Awtomatiku
The sound module features an automatic shut-off timer. After 10 minutes, the sound will automatically switch off to conserve battery life and ensure a quiet environment once the baby is asleep.

Image: Bibi the Bunny hanging on a crib, with a timer icon and text "Auto off: automatically shuts off after 10 minutes".
Manutenzjoni
Cleaning the Soft Toy
The soft toy can be washed. Importanti: Always remove the sound module before washing the plush toy. Refer to the care label on the toy for specific washing instructions.
Sound Module Care
Keep the sound module dry. Do not immerse it in water. Clean with a dry cloth if necessary.
Issolvi l-problemi
- Ebda Ħsejjes:
- Check if batteries are correctly installed and not depleted. Replace with new AAA alkaline batteries if needed.
- Ensure the sound module is properly inserted into the toy.
- Verify the volume setting is not at its lowest level.
- Cry Sensor Not Activating:
- Ensure the cry sensor feature is enabled (if applicable, based on module controls).
- Check for obstructions around the sound module's microphone.
- Ivverifika l-livell tal-batterija.
- Sound Stops Prematurely:
- The 10-minute auto-shutoff timer is a normal function. If it stops sooner, check battery level.
Speċifikazzjonijiet
| Isem tal-Mudell | Bibi the Bunny |
| Numru tal-Mudell | BIBI-01 |
| Brand | Zazu |
| Dimensjonijiet tal-Prodott | 13 x 12 x 19 ċm |
| Piż | 262 g |
| Materjal | Poliester |
| Batteriji Meħtieġa | 3 x AAA 1.5V alkaline batteries (not included) |
| Rakkomandazzjoni dwar l-Età | 0+ xhur |
| Manifattur | Kinder Dreams Pte Ltd |
Garanzija u Appoġġ
For warranty information or technical support, please contact your retailer or visit the official Zazu websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Manufacturer: Kinder Dreams Pte Ltd





