1. Introduzzjoni
Thank you for choosing the MTX Digital Caliper. This precision measuring instrument is designed for accurate internal, external, depth, and step measurements. Constructed from durable stainless steel, it features an easy-to-read LCD display for clear measurement readings. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your digital caliper.
Immaġni 1.1: B'mod ġenerali view of the MTX Digital Caliper, showing the main body, jaws, LCD display, and control buttons.
2. Informazzjoni dwar is-Sigurtà
Please read and understand all safety instructions before operating the digital caliper. Failure to follow these instructions may result in injury or damage to the tool.
- Always handle the caliper with care to avoid dropping or impacting it, which can affect its accuracy.
- Keep the caliper clean and free from dust, dirt, and moisture.
- Do not apply excessive force when taking measurements.
- Store the caliper in its protective case when not in use to prevent damage.
- Keep batteries out of reach of children. Dispose of used batteries responsibly.
3. Prodott Aktarview
Familiarize yourself with the components of your digital caliper:
- External Measuring Jaws: Used for measuring external dimensions.
- Internal Measuring Jaws: Used for measuring internal dimensions.
- Depth Measuring Blade: Used for measuring depths.
- Step Measuring Face: Used for measuring step dimensions.
- Main Scale (Beam): The fixed part of the caliper with the main measurement scale.
- Xedaq Mobbli: Slides along the main scale.
- Display LCD: Shows digital measurement readings.
- Buttuna ON/OFF: Jixgħel jew jitfi l-unità.
- Buttuna ZERO: Sets the display to zero at any position.
- mm/inch Button: Switches between millimeter and inch units.
- Thumb Roller: For fine adjustment of the movable jaw.
- Kamin tal-qfil: Secures the movable jaw in position.
Immaġni 3.1: Angolata view highlighting the LCD display, control buttons, and measuring jaws.
4. Setup
4.1. Installazzjoni tal-batterija
The digital caliper is powered by a button cell battery (typically SR44/LR44 1.5V). Batteries are not included with the product.
- Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-unità tal-wiri.
- Żerżaq l-għatu miftuħ.
- Insert a new 1.5V button cell battery with the positive (+) side facing up.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
4.2. Initial Power On and Zeroing
- Agħfas il- ON/OFF button to turn on the caliper.
- Gently close the external measuring jaws completely.
- Agħfas il- ŻERO button. The display should now read 0.00 mm or 0.000 in.
- Agħfas il- mm/pulzier button to select your desired unit of measurement.
Your caliper is now ready for use.
5. Istruzzjonijiet Operattivi
Ensure the caliper is clean and zeroed before taking any measurements.
5.1. External Measurement
- Open the external measuring jaws wider than the object to be measured.
- Poġġi l-oġġett bejn ix-xedaq.
- Gently close the jaws until they make firm contact with the object. Use the thumb roller for fine adjustment.
- Read the measurement directly from the LCD display.
- For consistent readings, apply light, even pressure.
Image 5.1: Measuring the external diameter of a component.
Image 5.2: Measuring the external dimension of a square tube.
5.2. Internal Measurement
- Insert the internal measuring jaws into the opening to be measured.
- Open the jaws until they make firm contact with the inner walls of the opening.
- Read the measurement from the LCD display.
Image 5.3: Measuring the internal dimension of a square tube.
5.3. Kejl tal-Fond
- Place the end of the main scale firmly on the top surface of the object.
- Extend the depth measuring blade into the hole or recess until its end touches the bottom.
- Read the measurement from the LCD display.
5.4. Step Measurement
- Place the step measuring face on the higher surface of the step.
- Slide the movable jaw until the end of the main scale rests on the lower surface of the step.
- Read the measurement from the LCD display.
6. Manutenzjoni
- Tindif: Wipe the caliper clean with a soft, dry cloth after each use. Avoid using solvents or harsh chemicals.
- Ħażna: Store the caliper in its original protective case in a dry, clean environment when not in use.
- Sostituzzjoni tal-batterija: If the display becomes dim or erratic, replace the battery.
- Kalibrazzjoni: Periodically check the zero point. If the caliper does not zero correctly, clean the measuring faces and try again. If issues persist, professional calibration may be required.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-displej huwa vojt jew mudlam. | Batterija baxxa jew mejta. | Ibdel il-batterija. |
| Qari mhux preċiż. | Dirty measuring faces; improper zeroing; damaged caliper. | Clean measuring faces; re-zero the caliper; inspect for damage. |
| Display shows erratic numbers. | Low battery; electromagnetic interference. | Replace battery; move away from strong electrical devices. |
| Jaws do not slide smoothly. | Dirt or debris on the beam. | Clean the beam thoroughly. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | 316119 |
| Medda ta' Kejl | 0-150 mm (0-6 pulzier) |
| Materjal | Stainless Steel |
| Wiri | Display Diġitali LCD |
| Sors tal-Enerġija | 1.5V Button Cell Battery (SR44/LR44 type, not included) |
| Unitajiet | Millimeters (mm) / Inches (in) |
| Dimensjonijiet tal-Prodott | 9 x 24.5 x 0.1 ċm (madwar) |
| Piż tal-Prodott | 0.22 kg (madwar) |
Image 8.1: Back of the caliper featuring useful measurement conversion charts.
9. Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation provided with your purchase or contact MTX customer service through their official websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Manufacturer: Mundo das Ferramentas do Brasil Ltda.
