AUTOOL BT360

AUTOOL BT360 12V Battery Load Tester Instruction Manual

Mudell: BT360

1. Introduzzjoni

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Informazzjoni dwar is-Sigurtà

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

  • Wear appropriate eye protection and protective clothing when working near batteries.
  • Kun żgur li l-vettura tkun f'żona b'ventilazzjoni tajba.
  • Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
  • Do not touch hot engine parts or moving components.
  • Keep the tester and cables away from water, oil, and grease.
  • Żgura li l-batterija clamps are securely connected to the correct terminals (red to positive, black to negative).
  • Jekk l-aċidu tal-batterija jiġi f'kuntatt mal-ġilda jew mal-għajnejn, laħlaħ immedjatament b'ħafna ilma u fittex attenzjoni medika.

3. Prodott Aktarview

3.1 Komponenti

The AUTOOL BT360 package typically includes:

  • AUTOOL BT360 Main Unit
  • Integrated Testing Cables with Alligator Clamps (Red for Positive, Black for Negative)
  • Manwal għall-Utent (dan id-dokument)
AUTOOL BT360 Battery Tester box contents

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

AUTOOL BT360 Battery Tester front view

Stampa 3.2: Quddiem view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

  • ESC: Escape/Back button.
  • ENT: Enter/Confirm button.
  • Vleġeġ 'il fuq/'l isfel: Buttuni tan-navigazzjoni għall-għażla tal-menù.

3.3 Karatteristiċi ewlenin

  • Performs Battery Test, Cranking Test, and Charging Test.
  • Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
  • Wide CCA testing range: 100-2400 CCA.
  • Appoġġ multilingwi għall-interfaċċja tal-utent.
AUTOOL BT360 Multi-language support

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Speċifikazzjonijiet

AUTOOL BT360 Battery Tester dimensions

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

ParametruValur
MudellBT360
Sistema Voltage12 Volts
Input Voltage Firxa9V ~ 15V
Medda CCA100-2400 CCA
Temperatura operattiva-20°C sa 50°C
Tipi ta 'batteriji appoġġjatiRegular Flooded, AGM Flat Plate, AGM Spiral, Gel
Dimensjonijiet (L x W x H)18.8 x 16.76 x 5.84 ċm
Piż320 g
UPC602860607704

4.1 Supported Starting Power Supply Standards

AUTOOL BT360 Supported CCA standards table

Image 4.2: Table showing various starting power supply standards supported by the BT360.

StandardFirxa
CCA100-2400
JIS26A17-245H52
DIN100-2200
IEC100-2200
EN100-1400
SAE100-2400
GB30-220Ah
BCI100-2400
MCA100-2400
CA100-2400

5. Setup

5.1 Disimballaġġ

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Konnessjoni tat-Tester

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

  1. Kun żgur li l-ignition tal-vettura tkun mitfija u li l-aċċessorji kollha jkunu mitfija.
  2. Qabbad il- aħmar pożittiv (+) clamp mat-terminal pożittiv (+) tal-batterija ta' 12V.
  3. Qabbad il- iswed negattiv (-) clamp mat-terminal negattiv (-) tal-batterija ta' 12V.
  4. Once connected, the tester will power on automatically.
AUTOOL BT360 Battery Tester with cables

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

AUTOOL BT360 Battery Tester connected to a car battery

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Istruzzjonijiet Operattivi

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

AUTOOL BT360 display screens showing test options and results

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Test tal-batterija

This function evaluates the overall health of the battery.

  1. Mill-menu prinċipali, agħżel Test tal-batterija and press ENT.
  2. Agħżel Post tal-batterija: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
  3. Agħżel Tip ta 'batterija: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
  4. Agħżel Standard tat-Test: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
  5. Issettja Klassifikazzjoni tal-Batterija: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
  6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Test tal-Krankjar

This test analyzes the vehicle's starting system, including the starter motor.

  1. Mill-menu prinċipali, agħżel Test tal-Krankjar and press ENT.
  2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage waqt il-cranking.
  3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Test tal-Iċċarġjar

This test evaluates the vehicle's charging system, including the alternator and regulator.

  1. Mill-menu prinċipali, agħżel Test tal-Iċċarġjar and press ENT.
  2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
  3. It-tester se jkejjel il-volum tal-iċċarġjartage under load and no-load conditions.
  4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Manutenzjoni

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

  • Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Żomm il-batterija magħluqaampnadif u ħieles mill-korrużjoni.
  • Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Evita li twaqqa 'l-apparat jew suġġett għal impatti qawwija.

8 Issolvi l-problemi

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
It-tester ma jixgħelx.Loose connection; Battery voltage too low; Faulty cables.Tiżgura clamps are securely connected. Check battery voltage (must be above 9V). Inspect cables for damage.
Qari mhux preċiż.Incorrect battery type/standard/rating selected; Corroded battery terminals.Verify selected parameters match the battery. Clean battery terminals.
Messaġġ ta' żball muri.Kundizzjoni ta' żball speċifika.Refer to the specific error code (if any) or re-run the test ensuring all steps are followed correctly.
L-iskrin huwa vojt jew iffriżat.Problema fis-softwer; Interruzzjoni tal-enerġija.Disconnect and reconnect the tester to reset. If problem persists, contact support.

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Manifattur: AUTOOL

Data L-Ewwel Disponibbli: 27 ta’ Ottubru, 2017

Dokumenti Relatati - BT360

Preview Manwal tal-Utent tat-Tester tas-Sistema tal-Batterija AUTOOL BT360
Comprehensive user manual for the AUTOOL BT360 Battery System Tester, detailing its functions, technical parameters, operation, and maintenance. Learn how to test vehicle batteries, cranking systems, and charging systems accurately.
Preview Manwal tal-Utent tat-Tester tas-Sistema tal-Batterija AUTOOL BT360
This user manual provides comprehensive instructions for operating the AUTOOL BT360 Battery System Tester. It covers product introduction, features, parameters, structure, operating procedures for battery, cranking, and charging tests, settings, maintenance, warranty, and return/exchange services.
Preview AUTOOL BT-660 Battery Conductance Tester User Manual
User manual for the AUTOOL BT-660 Battery Conductance Tester, detailing its specifications, usage instructions for battery, cranking, and charging tests, data review, printing, and export functions. It helps diagnose vehicle starting and charging system faults.
Preview AUTOOL BT 760 Battery System Tester User Manual
Comprehensive user manual for the AUTOOL BT 760 Battery System Tester, detailing its features, functions, technical specifications, and operating procedures for automotive and motorcycle battery testing.
Preview Auto Diagnostic Multimeter User Manual
Comprehensive user manual for the AUTOOL Auto Diagnostic Multimeter, covering its features, operation, and various automotive testing functions including voltage, current, resistance, oscilloscope, car circuit tests, injector tests, relay tests, and signal analysis.
Preview AUTOOL BT960 Battery System Tester User Manual - Features and Operation
Comprehensive user manual for the AUTOOL BT960 Battery System Tester. Covers lead-acid and lithium battery testing, cranking, charging, load tests, voltage/current measurement, safety, and operation. Visit www.autooltech.com for more.