1. Introduzzjoni
The ANTOP J Pole AT-724 is a versatile outdoor TV antenna mount designed for various installation scenarios. Its weather-resistant material ensures durability, making it suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your ANTOP AT-724 mount.
This mount features an adjustable angle base pivot, allowing for flat, angled, or vertical installations on roofs, attics, or sidewalls. It is lightweight yet sturdy, designed to support various outdoor antennas.
Image: The ANTOP AT-724 J Pole Antenna Mount shown next to its product packaging.
2. Prodott Aktarview u Komponenti
The ANTOP AT-724 mount consists of a J-shaped pole and a base pivot. All necessary mounting accessories are included for easy assembly.
2.1 Karatteristiċi ewlenin
- Adjustable angle, base pivot for flat, angled, or vertical use.
- Comes with all the screws and plastic split bushings, easy to install.
- Painted steel tube design for rust protection.
- Ideally sturdy enough to hold most outdoor Antennas.
2.2 Kontenut tal-Pakkett
- J Pol
- Base Pivot
- Mounting Accessories (screws, hex nuts, screw anchors)
Image: Visual representation of the mount's key attributes: painted steel, rust protection, ease of installation, and sturdy durability.
3. Setup u Installazzjoni
The ANTOP AT-724 mount offers multiple installation options due to its adjustable design. Ensure you have the appropriate tools and safety equipment before beginning installation.
3.1 Għażliet ta' Installazzjoni
The mount can be installed in various configurations:
- Immuntar tal-wiċċ ċatt: Suitable for walls or flat roof sections.
- Immuntar angolat: Ideal for sloped roofs or specific attic positions.
- Immuntar Vertikali: Can be used for pole extensions or specific sidewall applications.
Immaġni: Eżamples demonstrating the versatility of the mount, including insertion into an extension rod and mounting on a roof surface.
3.2 Aġġustament tal-Angolu
The base pivot allows for significant angle adjustment to optimize antenna positioning for signal reception.
Image: The mount's adjustable angle mechanism, demonstrated on a brick wall, highlighting its flexibility.
Immaġni: Dettaljata view of the mount's pivot, illustrating its ability to rotate up to 90 degrees to achieve optimal signal reception angles.
4. Istruzzjonijiet Operattivi
Once installed, the ANTOP AT-724 mount functions as a stable support for your outdoor antenna. Ensure the antenna is securely fastened to the pole for optimal performance.
Periodically check the mounting hardware for tightness, especially after severe weather conditions, to maintain stability and prevent damage to the antenna or mount.
5. Manutenzjoni
The ANTOP AT-724 mount is designed for durability and weather resistance. Minimal maintenance is required.
- Spezzjoni regolari: Annually inspect the mount for any signs of wear, corrosion, or loose connections.
- Tindif: If necessary, clean the mount with a damp cloth to remove dirt or debris. Avoid abrasive cleaners.
- Protezzjoni kontra s-sadid: The mount features a painted steel tube design for rust protection. If the paint is chipped, consider touching it up to prevent rust, especially in coastal or high-humidity environments.
6 Issolvi l-problemi
This section addresses common issues related to the antenna mount.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-muntatura tħossha instabbli wara l-installazzjoni. | Loose mounting hardware or improper installation surface. | Ensure all screws and nuts are tightened securely. Verify the installation surface is solid and appropriate for the mount's weight and leverage. |
| Antenna signal degradation. | Mount angle shifted or antenna not securely attached. | Check the mount's angle and adjust if necessary. Ensure the antenna is firmly attached to the mount pole. |
| Rust appearing on the mount. | Damage to the protective paint coating. | Clean the rusted area and apply a rust-inhibiting paint suitable for outdoor metal. |
7. Speċifikazzjonijiet
Detailed technical specifications for the ANTOP AT-724 J Pole Antenna Mount.
| Speċifikazzjoni | Valur |
|---|---|
| Isem tal-Mudell | AT-724 |
| Tul tad-Driegħ | 13 pulzieri |
| Base Pivot Dimensions | 6.1 x 1.38 x 2.5 pulzieri. |
| Dijametru tal-Arblu | 1.3 pulzieri |
| Piż | 1.25 lb (madwar 567 g) |
| Kulur | Miżbugħa Iswed |
| Materjal | Azzar miżbugħ |
| Dimensjonijiet tal-Prodott (ippakkjat) | 3.61 x 3.61 x 32.31 ċm |
| UPC | 853042007205 |
Image: A diagram illustrating the key dimensions of the J Pole mount, including its 13-inch length and 1.3-inch pole diameter.
8. Garanzija u Appoġġ
For warranty information and technical support, please refer to the official ANTOP webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.
Manifattur: Antop Antenna Inc
Data L-Ewwel Disponibbli: 4 ta’ Novembru, 2017
Għal aktar għajnuna, tista' żżur il- ANTOP Brand Store on Amazon.
