YeeSite YS-BR24

YeeSite YS-BR24 72W 24LED RGB Stage Light Bar Instruction Manual

Model: YS-BR24

1. Introduzzjoni

This manual provides detailed instructions for the safe and effective operation of your YeeSite YS-BR24 72W 24LED RGB Stage Light Bar. Please read this manual thoroughly before use and retain it for future reference.

2. Karatteristiċi tal-prodott

3. Informazzjoni dwar is-Sigurtà

4. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:

YeeSite YS-BR24 LED Stage Light Bar and accessories in packaging
Image 4.1: The YeeSite YS-BR24 LED Stage Light Bar with its included power cord and mounting brackets, shown next to its retail packaging.

5. Setup

5.1 Installazzjoni Fiżika

The light bar can be mounted in various positions: wall, ceiling, or floor. Use the provided mounting brackets to secure the unit. Ensure the mounting surface is stable and can support the weight of the fixture (approximately 4 pounds).

YeeSite YS-BR24 LED Stage Light Bar with mounting brackets
Image 5.1: The YeeSite YS-BR24 LED Stage Light Bar, illustrating its linear design and adjustable mounting brackets for flexible positioning.

5.2 Konnessjoni tal-Enerġija

Connect the provided power cord to the 'POWER IN' port on the back of the unit and then to a standard 110V AC power outlet.

Diagram showing power linking for multiple YeeSite YS-BR24 light bars
Image 5.2: A diagram illustrating the power linking capability of the YeeSite YS-BR24, allowing multiple units to be connected in series from a single power source. The image also shows the product dimensions: 40 inches long, 2.5 inches wide, and 3.3 inches high, with a 4.0 ft power cord.

For multiple units, use the 'POWER OUT' port to daisy-chain power to additional light bars. This eliminates the need for multiple power outlets.

6. Modi Operattivi

The YeeSite YS-BR24 offers several operational modes, selectable via the 4-button digital display on the rear panel (MENU, UP, DOWN, ENTER).

Close-up of the control panel and DMX ports on the YeeSite YS-BR24
Immaġni 6.1: Stampa dettaljata view of the rear panel of the YeeSite YS-BR24, highlighting the LED display, control buttons (MENU, UP, DOWN, ENTER), DMX IN/OUT ports, and power IN/OUT connections.

6.1 Auto-Run Mode

In Auto-Run mode, the light bar cycles through pre-programmed patterns and color changes automatically. Use the UP/DOWN buttons to select different auto programs or adjust speed.

6.2 Sound Active Mode

The Sound Active mode allows the light bar to react to ambient sound or music via its built-in microphone. The light patterns and colors will change in sync with the rhythm. Adjust sensitivity using the UP/DOWN buttons.

YeeSite YS-BR24 LED Stage Light Bar syncing with music in a live performance setting
Image 6.2: The YeeSite YS-BR24 LED Stage Light Bar displaying multi-color effects, synchronized with music during a live performance, demonstrating its sound-activated capabilities.

6.3 Static Color Mode

Select Static Color mode to display a single, continuous color. Use the UP/DOWN buttons to choose from a range of colors (Red, Green, Blue, or mixed colors).

YeeSite YS-BR24 LED Stage Light Bar displaying various static colors and multiple light effects
Image 6.3: The YeeSite YS-BR24 LED Stage Light Bar showcasing its ability to produce multiple light effects and static colors, including red, green, blue, and purple washes on a wall.

6.4 Modalità Master/Slave

To synchronize multiple YS-BR24 units, connect them using DMX cables. Set one unit as the 'Master' and the others as 'Slave' units. The Slave units will mimic the Master's operation, ensuring synchronized lighting effects across all connected fixtures.

7. Kontroll DMX

The YS-BR24 is compatible with DMX-512 protocol, allowing for advanced control via an external DMX controller. Connect the DMX output of your controller to the 'DMX IN' port of the first light bar. For multiple units, daisy-chain DMX cables from 'DMX OUT' to 'DMX IN' of subsequent units.

7.1 DMX Address Setting

Use the digital display and buttons to set the DMX address for each fixture. Each fixture in a DMX chain requires a unique starting address.

7.2 Modi tal-Kanal DMX

The YS-BR24 offers 5 DMX channel modes: 5, 8, 14, 26, and 50 channels. Select the mode that best suits your control requirements. Higher channel counts provide more granular control over individual LEDs, color mixing, and effects.

8. Manutenzjoni

9 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Id-dawl ma jixgħelxNo power, faulty cable, unit offCheck power connection, try another outlet, ensure unit is powered on.
Ebda kontroll DMXIncorrect DMX address, faulty DMX cable, incorrect channel modeVerify DMX address, check DMX cable connections, ensure correct DMX channel mode is selected.
Sound Active mode not workingLow sound input, microphone obstructed, sensitivity too lowIncrease music volume, ensure microphone is clear, adjust sound sensitivity setting.
Lights flicker or behave erraticallyPower fluctuations, DMX signal interference, loose connectionEnsure stable power supply, check DMX connections, try a different DMX cable.

10. Speċifikazzjonijiet

KaratteristikaDettall
Numru tal-MudellYS-BR24
Sors tad-Dawl24 x 3W RGB 3-in-1 LEDs
Wat totalitage72 Watts
Input Voltage110 Volts AC
Ampetà0.3 Amps
Angolu tar-raġġ40 Grad
Modi ta' KontrollDMX512, Sound Active, Auto-Run, Master/Slave, Static Color
Kanali DMX5, 8, 14, 26, 50 channels
MaterjalAluminum (Powder Coated)
Dimensjonijiet (L x W x H)40" x 2.5" x 2.5"
Piż tal-oġġett4 Liri
Tip ta 'ImmuntarWall mount, Ceiling mount, Floor mount

11. Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official YeeSite websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Dokumenti Relatati - YS-BR24

Preview 144LEDs RGB Stage Manwal għall-Utent tal-Bar tad-Dawl
Manwal tal-utent għall-144LEDS RGB Stage Light Bar, li tkopri struzzjonijiet ta' sigurtà, konnessjoni tas-sinjal DMX, speċifikazzjonijiet tekniċi, operazzjonijiet tal-menu tas-settings, modi DMX, u manutenzjoni.
Preview YeeSite 120W 18LEDs RGBW Stage Manwal għall-Utent tal-Bar tad-Dawl tal-Aħsel
Manwal tal-utent għall-YeeSite 120W 18LEDs RGBW Stage Wash Light Bar, li tkopri l-introduzzjoni, l-iżpakkjar, l-appoġġ għall-klijenti, il-linji gwida tas-sigurtà, l-installazzjoni, l-armar, is-setup, it-tħaddim tad-DMX, il-modalità master-slave, il-modalità tal-kulur statiku, il-modalità attiva bil-ħoss, il-modalità awtomatika, il-veloċità tal-programm, il-karatteristiċi tad-DMX għal diversi modi tal-kanal, u l-ispeċifikazzjonijiet.
Preview Manwal tal-Utent tal-Bar tad-Dawl tal-Pixel RGB ta' YeeSite 60W
Manwal tal-utent għall-YeeSite 60W RGB Pixel Light Bar, li jkopri l-introduzzjoni, l-iżpakkjar, l-appoġġ għall-klijenti, ir-reġistrazzjoni tal-garanzija, il-linji gwida tas-sigurtà, u l-prodott fuqview, dimensjonijiet, installazzjoni, armar, setup, kollegament DMX, pannell tal-kontroll, menu tas-sistema, struzzjonijiet operattivi, u speċifikazzjonijiet.