1. Introduzzjoni
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Istruzzjonijiet Ġenerali dwar is-Sigurtà
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: Evita l-kuntatt tal-ġisem ma 'uċuħ ertjati jew ertjati bħal pajpijiet, radjaturi, firxiet, u refriġeraturi. Hemm riskju akbar ta 'xokk elettriku jekk ġismek ikun ertjat jew ertjat.
- Sigurtà Personali: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Din se tagħmel ix-xogħol aħjar u b'mod aktar sikur bir-rata li ġiet iddisinjata għaliha. Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
- Użu u Kura tal-Pakkett tal-Batterija: Iċċarġja mill-ġdid biss bil-ċarġer speċifikat mill-manifattur. Ċarġer li huwa adattat għal tip wieħed ta' pakkett ta' batterija jista' joħloq riskju ta' nar meta jintuża ma' pakkett ta' batterija ieħor. Uża power tools biss b'pakketti ta' batteriji magħżula speċifikament.
3. Prodott Aktarview u Karatteristiċi
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Output Torque Għoli: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Kontroll tal-Veloċità Varjabbli: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Dawl LED integrat: Three power LEDs provide optimal illumination of the work area.
- Disinn Ergonomiku: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Kostruzzjoni Durabbli: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Clip taċ-ċinturin: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Setup
4.1 Installazzjoni tal-Batterija (Il-Batterija u l-Ċarġer Jinbiegħu Separatament)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.
4.2 Inserzjoni u Tneħħija tal-Bit
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Istruzzjonijiet Operattivi
5.1 Ixgħel/Itfi u Kontroll tal-Veloċità
- Tibda: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Aġġustament tal-veloċità: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Biex Tieqaf: Erħi l-iswiċċ ON/OFF.
5.2 Direzzjoni tar-Rotazzjoni
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Rotazzjoni 'l Quddiem (Invita 'l Ġewwa): Imbotta s-swiċċ tas-selettur lejn ix-xellug.
- Rotazzjoni bil-maqlub (Tneħħija tal-viti): Imbotta s-swiċċ tas-selettur lejn il-lemin.
- Pożizzjoni tas-Sokkjar: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-impact driver tiegħek.
- Tindif: Wara kull użu, naddaf il-kaxxa tal-għodda b'ċarruta ratba u driegħ.amp drapp. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu. Kun żgur li l-fetħiet tal-ventilazzjoni huma ħielsa mit-trab u l-fdalijiet.
- Ħażna: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Spezzjoni: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tibda. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Qawwa jew prestazzjoni mnaqqsa. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Il-bit mhux qed jinżamm sew. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Einhell |
| Numru tal-Mudell | TE-CI 18/1 Li Solo (4510034) |
| Sors tal-Enerġija | Battery Powered (18V Power X-Change) |
| Veloċità ta' Rotazzjoni Massima | 2300 RPM |
| Torque Massimu | 140 Newton Metru |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Voltage | 18 Volts |
| Piż tal-oġġett | 1.18 Kilogrammi (2.58 libbra) |
| Dimensjonijiet tal-Prodott | 7.8"T x 3.03"W x 6.65"Għ |
| Materjal | Rubber, Aluminium |
| Komponenti Inklużi | Akku-Schlagschrauber (Impact Driver Body Only) |
| Batteriji Inklużi? | Nru |
| Batteriji Meħtieġa? | Yes (18V Lithium Ion) |
9. Garanzija u Appoġġ
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell websit.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
