Introduzzjoni
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Informazzjoni dwar is-Sigurtà
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-enerġija fil-fjus jew circuit breaker qabel l-installazzjoni jew is-servizz.
- TWISSIJA: Risk of fire. Use only in circuits rated for the fixture.
- Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess ta 'installazzjoni.
- Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
X'hemm fil-Kaxxa
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Ħardwer tal-Immuntar
- Kontroll mill-bogħod (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Konfigurazzjoni (Installazzjoni)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Itfi l-Enerġija: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltagtester.
- Ipprepara l-Wiċċ tal-Immuntar: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Qabbad Wajers: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Fixture tal-Immonta: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Irrestawra l-Enerġija: Ladarba l-apparat ikun installat sew, erġa' daħħal l-enerġija fis-circuit breaker.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Istruzzjonijiet Operattivi
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Tixgħel/Jitfi: Flip the wall switch connected to the fixture to turn the light on or off.
- Effiċjenza tal-Enerġija: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Manutenzjoni
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Uża drapp artab, niexef, jew kemxejn imxarrab.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Lonġevità tal-LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi bl-apparat tad-dawl tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | L-ebda dawl fl-apparat tad-dawl; wajers maħlula; swiċċ difettuż. | Iċċekkja s-circuit breaker. Kun żgur li l-konnessjonijiet tal-wajers kollha huma sikuri. Ittestja s-swiċċ tal-ħajt. |
| Teptip ħafif. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| L-output tad-dawl huwa baxx jew inkonsistenti. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| L-apparat jagħmel ħoss ta' tħaxwix. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Speċifikazzjonijiet
- Numru tal-Mudell: CLL56-2WW
- Dimensjonijiet tal-Prodott: 7.4 x 7.4 x 1.4 pulzieri
- Piż: 2.15 Pounds (per pack, total for 2 lights)
- Ditta: Sors tal-Proġett
- Kulur: Abjad
- Formola ta' Tagħmir tad-Dawl: Ceiling (Flush Mount)
- Użu fuq ġewwa/barra: Indoor/Outdoor (Wet Rated)
- Sors tal-Enerġija: Corded Electric (Direct Wire)
- Ħruġ tad-Dawl: 730 Lumens
- Temperatura tal-Kulur: 3000K
- Indiċi tar-Rendiment tal-Kulur (CRI): 90
- Klassifikazzjoni tal-Enerġija: Energy Star
Garanzija u Appoġġ
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source websit.
