1. Introduzzjoni
The Marmitek Surround Anywhere 221 is designed to convert your existing wired rear speakers into wireless speakers, eliminating the need for long speaker cables across your room. This kit provides high-quality, uncompressed digital audio transmission without delay, ensuring an optimal surround sound experience.
Image 1.1: Marmitek Surround Anywhere 221 Transmitter and Receiver units. The top unit is the transmitter, and the bottom unit is the receiver, both in a sleek black finish.
Image 1.2: A living room setup demonstrating the benefit of wireless speakers, with no visible cables on the floor.
2. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok aqra u ifhem l-istruzzjonijiet kollha tas-sigurtà qabel ma tuża dan il-prodott. Żomm dan il-manwal għal referenza futura.
- Interference may occur with other wireless devices operating at the same 2.4 GHz frequency. Maintain adequate distance from other wireless devices to minimize interference.
- Tesponix l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
- Tiftaħx l-apparat casing. Is-servizz għandu jsir biss minn persunal kwalifikat.
- Uża biss l-adapters tal-enerġija pprovduti.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Unità tat-trasmettitur 1x
- 1x Unità tar-riċevitur
- 1x Power adapter for Transmitter (185 cm cable)
- 1x Power adapter for Receiver (145 cm cable)
- 1x Speaker cable (60 cm)
Image 3.1: Visual representation of the items included in the Marmitek Surround Anywhere 221 package.
Image 3.2: The retail packaging for the Marmitek Surround Anywhere 221 kit.
4. Prodott Aktarview
The Marmitek Surround Anywhere 221 consists of a transmitter and a receiver unit. The transmitter connects to your AV receiver's speaker outputs, and the receiver connects to your rear speakers.
Karatteristiċi ewlenin:
- Uncompressed Digital Transmission: Ensures superior sound quality, comparable to CD audio, without interference or delay.
- Integrata Ampaktar ħaj: The receiver features a built-in amplifier providing sufficient power for your speakers (2 x 25 W RMS / 2 x 50 W musical power).
- Kontroll tal-Volum: A dedicated volume control on the receiver allows for balanced sound between front and rear speakers.
- Direct Speaker Output Connection: Volume adjusts automatically with your main audio system when connected directly to speaker outputs.
- Tqabbil Sikur: Transmitter and receiver are securely paired, allowing up to 6 sets to be used in the same room without interference.
Immaġni 4.1: Intern view of the receiver unit, highlighting its electronic components and integrated ampaktar ħaj.
Image 4.2: A schematic diagram illustrating the wireless audio signal path from a surround sound system to the rear speakers via the transmitter and receiver.
5. Istruzzjonijiet ta' Setup
Follow these steps to set up your Marmitek Surround Anywhere 221 kit:
- Qabbad it-Trasmettitur:
- Locate the speaker outputs on your AV receiver or amplifier that are designated for your rear speakers (e.g., "Surround Left" and "Surround Right").
- Connect the speaker cables from these outputs to the "SPEAKER INPUT R" and "SPEAKER INPUT L" terminals on the Trasmettitur unit. Ensure correct polarity (+ to + and - to -).
- Connect the transmitter's power adapter to the "DC 5V" input and then plug it into a power outlet.
- Qabbad ir-Riċevitur:
- Pożizzjona l Riċevitur unit near your rear speakers.
- Connect your rear speakers to the "SPEAKER OUTPUT R" and "SPEAKER OUTPUT L" terminals on the Riċevitur unit using speaker cables. Ensure correct polarity.
- Connect the receiver's power adapter to the "DC 5V" input and then plug it into a power outlet.
- Ixgħel u Par:
- Turn on both the Transmitter and Receiver units using their respective ON/OFF switches.
- The units should automatically pair. A status indicator light (usually blue) will confirm a successful connection.
- Aġġustament tal-Volum Inizjali:
- Start with the volume knob on the receiver unit set to a low level.
- Play audio through your AV receiver and gradually increase the receiver's volume until the rear speakers are balanced with your front speakers.
Image 5.1: Connection diagram for the transmitter and receiver units, showing speaker cable and power connections.
Immaġni 5.2: Close-up view of the speaker input/output terminals and the volume control knob on the receiver unit.
6. Istruzzjonijiet Operattivi
Once set up, the Marmitek Surround Anywhere 221 operates largely automatically. Here are some operational considerations:
- Power On/Off: The units can be turned on or off using their respective switches. For optimal convenience, you can connect them to switched power outlets that turn on with your AV receiver.
- Sinkronizzazzjoni tal-Volum: When connected to the speaker outputs of your AV receiver, the volume of the wireless rear speakers will automatically adjust with the main volume control of your AV system.
- Fine-tuning Volume: Use the volume knob on the receiver unit to fine-tune the balance of the rear speakers relative to the front speakers. This allows you to achieve your preferred surround sound immersion.
- Multiple Sets: If using multiple Surround Anywhere 221 kits in the same area, the secure pairing ensures that each transmitter communicates only with its paired receiver, preventing interference.
Image 6.1: The volume control knob on the receiver, used for balancing rear speaker levels.
Image 6.2: The master volume control on a typical AV receiver, which will synchronize with the wireless rear speakers.
7. Manutenzjoni
The Marmitek Surround Anywhere 221 requires minimal maintenance:
- Tindif: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or abrasive materials.
- Ventilazzjoni: Ensure the units have adequate ventilation to prevent overheating. Do not cover them or place them in enclosed spaces.
- Ġestjoni tal-Kejbil: Iċċekkja perjodikament il-konnessjonijiet tal-kejbil kollha biex tiżgura li huma sikuri u ħielsa minn ħsara.
8 Issolvi l-problemi
If you encounter issues with your Surround Anywhere 221, try the following:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No sound from rear speakers |
|
|
| Sound interference or dropouts |
|
|
| Rear speaker volume too loud/quiet |
|
|
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Marmitek |
| Numru tal-Mudell | 08200 |
| Teknoloġija tal-Konnettività | Mingħajr fili (2.4 GHz) |
| Sors tal-Enerġija | Corded Elettriku |
| Materjal | Plastik |
| Dimensjonijiet tat-Trasmettitur (T x W x G) | 120 x 82 x 30 mm (madwar) |
| Dimensjonijiet tar-Riċevitur (T x W x G) | 155 x 110 x 35 mm (madwar) |
| Piż tal-Prodott | 200 grams (total, approx.) |
| Amplifier Output (Receiver) | 2 x 25 W RMS (2 x 50 W musical power) |
| Karatteristika Speċjali | Uncompressed digital transmission for high-quality sound |
Image 9.1: Dimensions of the Marmitek Surround Anywhere 221 transmitter and receiver units.
10. Garanzija u Appoġġ
Marmitek products are designed and manufactured to the highest standards. This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Marmitek websit.
For technical support, troubleshooting assistance, or warranty claims, please contact Marmitek customer service or your retailer. Contact information can typically be found on the Marmitek webis-sit jew fl-imballaġġ tal-prodott tiegħek.
Image 10.1: "Dutch Quality EU European Standards" badge, indicating product quality and compliance.
