Manwal tal-Utent tal-Kompressur tal-Arja ABAC Pole Position ta' 24 Litru

Introduzzjoni

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.

The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.

Istruzzjonijiet tas-Sigurtà

Always observe the following safety precautions to prevent personal injury or damage to the compressor:

• Kun żgur li l-kompressur jitqiegħed fuq wiċċ stabbli u livellat.
• Tħaddimx il-kompressur fl-imxarrab jew damp kundizzjonijiet.
• Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
• Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
• Qatt m'għandek tidderieġi arja kkompressata lejn nies jew annimali.
• Żomm it-tfal u l-persuni mhux awtorizzati 'l bogħod miż-żona tal-operazzjoni.
• Regularly check all connections and hoses for leaks or damage.

Komponenti Matulview

• Tank tal-Ajru: Stores compressed air (24 litres capacity).
• Motor and Pump Assembly: Jiġġenera arja kkompressata.
• Gauges tal-Pressjoni: Uri l-pressjoni tat-tank u l-pressjoni regolata tal-ħruġ.
• Regolatur tal-Pressjoni: Jaġġusta l-pressjoni tal-arja tal-ħruġ.
• Quick Connect Coupler: For attaching air tools and hoses.
• Valv tad-Drenaġġ: Jinsab fil-qiegħ tat-tank biex ineħħi l-kondensazzjoni.
• Roti u Manku: Għal trasport faċli tal-unità.

Setup

1. Spakkjar u Spezzjoni: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
2. Assemblaġġ (jekk meħtieġ): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
3. Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
4. Pjazzament: Poġġi l-kompressur fuq wiċċ sod u livellat f'żona ventilata sew. Kun żgur li hemm biżżejjed spazju madwar l-unità għaċ-ċirkolazzjoni tal-arja.
5. Konnessjoni Elettrika: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.

Istruzzjonijiet Operattivi

1. Kif tibda l-Kompressur:
   • Kun żgur li l-valv tad-drenaġġ fil-qiegħ tat-tank ikun magħluq.
   • Plug the compressor into the power outlet.
   • Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
2. Aġġustament tal-Pressjoni tal-Ħruġ:
   • Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
   • Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
3. Konnessjoni tal-Għodda tal-Ajru:
   • Attach your air hose to the quick connect coupler.
   • Qabbad l-għodda tal-arja tiegħek mat-tarf l-ieħor tal-pajp.
4. Tfigħ:
   • Flip the ON/OFF switch to the 'OFF' position.
   • Skonnettja l-kompressur mill-plagg tal-elettriku.
   • Depressurize any air remaining in the hose and tool.
5. Tbattal tal-Kondensazzjoni: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.

Manutenzjoni

Regular maintenance ensures optimal performance and longevity of your compressor.

• Kuljum:
  • Drain condensation from the air tank.
  • Check oil level (if applicable, for oil-lubricated models).
• Weekly/Every 10 Hours of Use:
  • Inspect air filter for dirt and debris. Clean or replace if necessary.
  • Iċċekkja għal xi ħsejjes jew vibrazzjonijiet mhux tas-soltu.
• Monthly/Every 50 Hours of Use:
  • Inspect all fasteners for tightness.
  • Check safety valve operation (briefly pull the ring to ensure it releases air).
• Annually/Every 200 Hours of Use:
  • Change compressor oil (if applicable).
  • Inspect pressure switch and gauges for proper function.
• Ħażna: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.

Issolvi l-problemi

If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.

Speċifikazzjonijiet

Garanzija u Appoġġ

ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC websit.

For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.

Tista' ssib aktar informazzjoni u dettalji ta' kuntatt fuq ABAC Store on Amazon.