Defiant DFI-5852-BK

Defiant DFI-5852-BK 180 Degree Black Motion Activated Outdoor Flood Light

Manwal għall-Utent

Prodott Overview

The Defiant DFI-5852-BK is an advanced LED motion floodlight designed to enhance safety and security for outdoor spaces. It delivers 1200 Lumens of bright illumination and features a 180-degree motion-activated sensor. This unit incorporates Motion-Off technology, allowing the motion sensor to be bypassed, enabling a dusk-to-dawn operation mode via its internal photocell. With durable LED technology, there is no need for bulb replacement, offering a long-lasting lighting solution. Installation is simplified with three easy steps, supporting both wall and eave mount applications.

Defiant DFI-5852-BK 180 Degree Black Motion Activated Outdoor Flood Light

An image showing the Defiant DFI-5852-BK flood light. It features two round LED lamp heads mounted on an adjustable arm, with a motion sensor unit positioned below them. The light is black in color.

Istruzzjonijiet Importanti dwar is-Sigurtà

Jekk jogħġbok aqra u ifhem l-istruzzjonijiet kollha qabel tibda l-installazzjoni. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew perikli oħra li jistgħu jikkawżaw korriment jew ħsara lill-proprjetà.

Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

Gwida għall-Installazzjoni

The Defiant DFI-5852-BK flood light is designed for straightforward installation, typically completed in three easy steps. It can be mounted on either a wall or an eave.

Għażliet ta 'Immuntar

Passi ta' Installazzjoni Ġenerali

  1. Ipprepara l-Wajers: Turn off power at the circuit breaker. Remove the existing fixture (if any) and expose the electrical box wiring.
  2. Waħħal il-parentesi tal-immuntar: Secure the provided mounting bracket to the electrical box. Ensure the bracket is oriented correctly for your chosen mounting option (wall or eave).
  3. Qabbad il-Wiring: Connect the flood light's wires to your household wiring using wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
  4. Fixture tal-Immonta: Carefully align the flood light unit with the mounting bracket and secure it in place with the provided screws. Ensure the gasket creates a tight seal against the mounting surface to prevent water intrusion.
  5. Seal (if necessary): Apply a bead of silicone caulk around the base of the fixture where it meets the mounting surface for added weather protection, especially on uneven surfaces.
  6. Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.

Note: For detailed diagrams and specific instructions, refer to the included printed manual.

Istruzzjonijiet Operattivi

Mozzjoni Attivata

The flood light features a 180-degree motion-activated sensor that detects movement within its range, automatically turning on the light. The light will remain on for the set duration after motion is no longer detected.

Motion-Off / Dusk-to-Dawn Mode

This flood light includes a unique Motion-Off technology. By adjusting the sensor settings, you can disable the motion detection feature. In this mode, the internal photocell will activate the light at dusk and turn it off at dawn, providing continuous illumination throughout the night.

Aġġustamenti

Kura u Manutenzjoni

The Defiant DFI-5852-BK flood light utilizes integrated LED technology, meaning there are no bulbs to change. This significantly reduces maintenance requirements.

Issolvi l-problemi

If you experience issues with your Defiant flood light, refer to the table below for common problems and their solutions.

ProblemaKawża PossibbliSoluzzjoni
Id-dawl ma jixgħelx.
  • L-ebda qawwa għall-apparat.
  • Sensor sensitivity too low.
  • Photocell detecting too much ambient light (in motion mode).
  • Iċċekkja s-circuit breaker u l-konnessjonijiet tal-wajers.
  • Increase sensor sensitivity.
  • Ensure photocell is not obstructed or exposed to direct light.
Id-dawl jibqa' mixgħul kontinwament.
  • Continuous motion in sensor's range.
  • On-time setting is too long.
  • Fixture is in Dusk-to-Dawn mode.
  • Adjust sensor angle or sensitivity to exclude unwanted areas.
  • Decrease the on-time setting.
  • Verify sensor settings are not set for continuous operation.
Id-dawl teptip jew jitbaxxa.
  • Konnessjoni tal-wajers sfużi.
  • Voltagvarjazzjonijiet.
  • Turn off power and check all wiring connections.
  • Ikkonsulta elettriċista jekk il-volumtagIl-kwistjonijiet jippersistu.

Speċifikazzjonijiet Tekniċi

BrandSfidanti
Numru tal-MudellDFI-5852-BK
Output tad-Dawl1200 Lumens
Kopertura tas-Sensor tal-Moviment180 degrees, up to 40 ft.
Adjustable On-TimeSa 10 minuta
Temperatura operattiva-25°C (-13°F) sa +50°C (+120°F)
Voltage110 Volts
Sors tad-DawlIntegrated LED (Non-replaceable)
Tip ta' InstallazzjoniWall or Eave Mount
Livell ta 'Reżistenza għall-IlmaReżistenti għall-Ilma
Dimensjonijiet tal-Prodott (Għ x T x W)9.5 x 7 x 7 pulzieri
Piż tal-oġġett2 liri

Garanzija u Appoġġ għall-Klijent

This Defiant flood light is covered by a Garanzija tal-Manifattur. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty information provided with your purchase or contact Defiant customer support directly.

If you require assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact Defiant customer service. Keep your purchase receipt and model number (DFI-5852-BK) readily available when contacting support.

Contact information for Defiant customer support can typically be found on the product packaging, the manufacturer's official webis-sit, jew id-dokumentazzjoni tax-xiri tiegħek.