Zipper ZI-GRM1100

Manwal tal-Istruzzjonijiet tal-Magna tat-Tqattiegħ tat-Tjur Rotanti Zipper ZI-GRM1100

Model: ZI-GRM1100

1. Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Zipper ZI-GRM1100 Rotary Poultry Plucker. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Zipper ZI-GRM1100 is designed for rapid and efficient feather removal from poultry. It features a powerful motor, durable stainless steel construction, and 110 interchangeable rubber fingers for effective plucking. This machine significantly reduces the time and effort required for poultry processing compared to manual methods. It can pluck up to two birds simultaneously in approximately 15 seconds, after proper scalding at around 55°C. The integrated water inlet allows for continuous rinsing, and its transport wheels ensure easy mobility. The asynchronous motor is powerful, silent, and maintenance-free.

2. Istruzzjonijiet tas-Sigurtà

TWISSIJA: Jekk ma ssegwix dawn l-istruzzjonijiet tas-sigurtà, dan jista' jirriżulta fi korriment serju jew ħsara lit-tagħmir.

2.1 Sigurtà Ġenerali

  • Dejjem aqra u ifhem il-manwal tal-istruzzjonijiet kollu qabel ma tħaddem il-magna.
  • Żomm lit-tfal u lill-persunal mhux awtorizzat 'il bogħod mill-magna waqt it-tħaddim.
  • Operate the machine on a stable, level, and non-slip surface to prevent tipping.
  • Żgura dawl adegwat fiż-żona tax-xogħol.
  • Tħaddimx il-magna jekk xi partijiet ikunu bil-ħsara jew neqsin.
  • Ilbes tagħmir protettiv personali (PPE) xieraq, inklużi ingwanti u protezzjoni għall-għajnejn.

2.2 Sigurtà Elettrika

  • Qabbad il-magna biss ma' sokit elettriku ertjat sew bil-volt korretttage (230 V, 50 Hz).
  • Never operate the machine in wet conditions or with wet hands.
  • Ensure the power cord is not damaged, pinched, or exposed to sharp edges or heat.
  • Always disconnect the power supply before performing any maintenance, cleaning, or when the machine is not in use.
  • Do not use extension cords unless absolutely necessary, and ensure they are rated for the machine's power requirements and are properly grounded.

2.3 Sigurtà Operazzjonali

  • Keep hands, hair, loose clothing, and jewelry away from all moving parts, especially the plucking fingers, during operation.
  • Ensure poultry is properly scalded at approximately 55°C before plucking to achieve optimal results and prevent skin damage.
  • Do not overload the machine; it is designed to pluck up to two birds simultaneously.
  • Use the water inlet connection to continuously rinse feathers and debris during operation, keeping both hands free for handling poultry.
  • Never attempt to clear jams or remove poultry while the machine is running. Always turn off and unplug the machine first.

3. Prodott Aktarview

The Zipper ZI-GRM1100 Rotary Poultry Plucker is a robust and efficient tool for poultry processing. Key components and features include:

  • Tanbur Stainless Steel: Durable and hygienic, meeting food quality standards.
  • 110 Interchangeable Rubber Fingers: Designed for effective and gentle feather removal.
  • Powerful Asynchronous Motor: 1100 W, 230 V, 50 Hz, providing 300 rpm rotation speed. Silent and maintenance-free.
  • Integrated Water Inlet: Allows for continuous rinsing during operation, improving efficiency and cleanliness.
  • Roti tat-Trasport: Two wheels for easy maneuverability and transport.
  • Qafas b'saħħtu: Jipprovdi stabbiltà waqt l-operazzjoni.
Zipper ZI-GRM1100 Rotary Poultry Plucker overall view

Figura 3.1: B'mod ġenerali view of the Zipper ZI-GRM1100 Rotary Poultry Plucker. This image shows the stainless steel drum, the motor housing, the support frame, and the transport wheels, providing a complete perspective of the machine's design.

Close-up of water inlet connection on Zipper ZI-GRM1100

Figura 3.2: Close-up view of the water inlet connection. This brass fitting allows for a hose to be attached, providing a continuous water supply to rinse feathers during the plucking process, enhancing efficiency and hygiene.

Intern view of Zipper ZI-GRM1100 with rubber plucking fingers

Figura 3.3: Minn fuq għal isfel view of the plucking drum interior, showing the arrangement of the 110 interchangeable rubber fingers. These fingers are crucial for gently yet effectively removing feathers from poultry.

4. Setup

4.1 Spakkjar u Spezzjoni

  • Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
  • Inspect the machine for any signs of shipping damage. If damage is found, do not operate the machine and contact your supplier immediately.
  • Kun żgur li l-komponenti kollha elenkati huma preżenti.

4.2 Assemblaġġ (jekk meħtieġ)

The Zipper ZI-GRM1100 typically requires minimal assembly, primarily attaching the support legs and wheels. Follow these general steps:

  1. Attach the support legs to the main body of the plucker using the provided hardware. Ensure all bolts are securely tightened.
  2. Mount the transport wheels onto the designated axles on the support frame.
  3. Verify that the machine is stable and all connections are secure before proceeding.

4.3 Placement and Connections

  • Place the plucker on a firm, level surface in an area with good drainage, as water will be used during operation.
  • Ensure the location is near a suitable electrical outlet (230 V, 50 Hz) and a water source.
  • Connect a standard garden hose to the water inlet connection on the side of the drum. Ensure the connection is tight to prevent leaks.
  • Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.

5. Istruzzjonijiet Operattivi

Follow these steps for safe and effective poultry plucking:

  1. Poultry Preparation: Ensure the poultry has been properly scalded. The recommended water temperature for scalding is approximately 55°C (130°F). Proper scalding loosens the feathers, making them easier to remove.
  2. Load Poultry: With the machine turned OFF and UNPLUGGED, carefully place up to two scalded birds into the plucking drum.
  3. Ibda l-Fluss tal-Ilma: Turn on the water supply to the plucker. A continuous flow of water helps to rinse away feathers and debris during operation.
  4. Ibda l-Magni: Plug in the machine and turn on the power switch. The drum will begin to rotate, and the rubber fingers will start plucking the feathers.
  5. Plucking Process: The plucking process is typically very fast, often completed within 15 seconds for properly scalded birds. Observe the poultry to determine when most feathers have been removed.
  6. Waqqaf il-Magni: Once plucking is complete, turn off the power switch and unplug the machine. Turn off the water supply.
  7. Remove Poultry: Carefully remove the plucked poultry from the drum.
  8. Inspect and Finish: Inspect the poultry for any remaining feathers and remove them manually if necessary.

Nota: Over-plucking can damage the skin. Monitor the process closely to achieve optimal results.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your Zipper ZI-GRM1100 plucker.

6.1 Tindif

  • Wara Kull Użu: Immediately after each plucking session, disconnect the power and thoroughly rinse the inside and outside of the drum with water to remove all feathers and debris. The stainless steel drum is designed for easy cleaning.
  • Use a brush if necessary to dislodge stubborn debris from around the rubber fingers.
  • Ensure all water drains completely from the machine to prevent stagnazzjon u tkabbir batterjali.
  • Imsaħ l-uċuħ ta 'barra b'adamp drapp.

6.2 Spezzjoni

  • Rubber Fingers: Periodically inspect the rubber plucking fingers for signs of wear, cracking, or damage. Worn fingers can reduce plucking efficiency. Replace any damaged fingers promptly.
  • Korda Elettrika: Check the power cord for any cuts, fraying, or damage. Do not use the machine if the cord is compromised.
  • Mutur: The asynchronous motor is designed to be maintenance-free. Do not attempt to open or service the motor yourself.

6.3 Ħażna

  • Store the plucker in a clean, dry place, protected from extreme temperatures and direct sunlight.
  • Ensure the machine is completely dry before storing to prevent corrosion.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your Zipper ZI-GRM1100 plucker.

ProblemaKawża PossibbliSoluzzjoni
Il-magna ma tibdax.
  • Korda tad-dawl mhux imdaħħla.
  • L-ebda enerġija mis-sokit.
  • Is-swiċċ tal-enerġija huwa mitfi.
  • Ħsara elettrika interna.
  • Kun żgur li l-korda tal-enerġija hija pplaggjata sew f'sokit ertjat.
  • Iċċekkja s-circuit breaker jew ipprova sokit differenti.
  • Dawwar is-swiċċ tal-enerġija għall-pożizzjoni 'ON'.
  • If issues persist, contact qualified service personnel.
Poor plucking performance / Feathers not removed effectively.
  • Poultry not properly scalded.
  • Worn or damaged rubber fingers.
  • Overloading the machine.
  • Ensure scalding water is at the correct temperature (approx. 55°C) and poultry is immersed for the appropriate duration.
  • Inspect and replace any worn or damaged rubber fingers.
  • Reduce the number of birds being plucked simultaneously.
Vibrazzjoni eċċessiva jew storbju mhux tas-soltu.
  • Machine not on a level surface.
  • Komponenti sfużi.
  • Kwistjoni tal-mutur.
  • Relocate the machine to a stable, level surface.
  • Check and tighten all bolts and fasteners.
  • If the noise or vibration persists and seems to originate from the motor, discontinue use and contact qualified service personnel.

For problems not listed here or if solutions do not resolve the issue, please contact your dealer or a qualified service technician.

8. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
MudellZI-GRM1100
BrandZipper
Qawwa1100 W
Voltage / Frekwenza230V/50Hz
Veloċità ta 'Rotazzjoni300 rpm
Number of Plucking Fingers110
Piż Nett43 kg
Piż Gross48 kg
Dimensjonijiet (L x W x H)78 x 68 x 91.5 ċm
Materjal tanburStainless Steel

9. Garanzija u Appoġġ

9.1 Informazzjoni dwar Garanzija

The Zipper ZI-GRM1100 Rotary Poultry Plucker comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please note that the warranty does not cover wear parts, such as the rubber plucking fingers, which are subject to normal wear and tear during operation.

To make a warranty claim, please retain your proof of purchase and contact your retailer or the authorized Zipper service center.

9.2 Appoġġ għall-Klijent

For technical assistance, spare parts, or further inquiries, please contact your authorized Zipper dealer or visit the official Zipper websit għal riżorsi ta' appoġġ.

When contacting support, please have your model number (ZI-GRM1100) and purchase date available.

Dokumenti Relatati - ZI-GRM1100

Preview Manwal tal-Utent u Gwida tas-Sigurtà tal-Magna tat-Tqaxxir tat-Tiġieġ ZIPPER ZI-GRM400, ZI-GRM1100, ZI-GRM1650
Manwal komprensiv għall-utent u gwida tas-sigurtà għall-magni tat-tnittf tat-tiġieġ ZIPPER, mudelli ZI-GRM400, ZI-GRM1100, u ZI-GRM1650, li jkopru l-assemblaġġ, it-tħaddim, il-manutenzjoni, u s-soluzzjoni tal-problemi.
Preview Manwal tal-Utent tal-Kompressuri tal-Arja Siekta ZIPPER ZI-COM24SI, ZI-COM50SI, ZI-COM90SI
Manwal tal-utent għall-kompressuri tal-arja silenzjużi ZIPPER, mudelli ZI-COM24SI, ZI-COM50SI, u ZI-COM90SI. Jinkludi speċifikazzjonijiet tekniċi, komponenti, struzzjonijiet ta' sigurtà, assemblaġġ, tħaddim, manutenzjoni, issolvi l-problemi, u spare parts.
Preview ZIPPER Rüttelplatten ZI-RPE60C & ZI-RPE90C Bedienungsanleitung
Diese Betriebsanleitung enthält wichtige Informationen zur sicheren Inbetriebnahme, Handhabung, Wartung und zum Betrieb der ZIPPER Rüttelplatten ZI-RPE60C u ZI-RPE90C.
Preview Manwal tal-Utent tal-Ċarġer u l-Batterija ZIPPER 40V
Manwal komprensiv għall-utent għall-ċarġer tal-batterija 40V ta' ZIPPER (ZI-LGR40V-AKKU) u batteriji 40V (ZI-BTR40V-AKKU, ZI-BTR40V2AH-AKKU), li jkopri s-sigurtà, it-tħaddim, il-manutenzjoni u l-ispeċifikazzjonijiet.
Preview Bedienungsanleitung ZIPPER Rüttelplatten ZI-RPE60C & ZI-RPE90C
Umfassende Bedienungsanleitung für die ZIPPER Rüttelplatten ZI-RPE60C u ZI-RPE90C. Enthält wichtige Informationen zur sicheren Inbetriebnahme, Handhabung, Wartung und technischen Spezifikationen dieser hochwertigen Baumaschinen.
Preview Manwal tal-Utent tat-Tindif bi Pressjoni Għolja ZIPPER ZI-HDR165 & ZI-HDR195
Manwal komprensiv għall-utent għal magni tat-tindif bi pressjoni għolja ZIPPER, mudelli ZI-HDR165 u ZI-HDR195. Jinkludi struzzjonijiet ta' sigurtà, speċifikazzjonijiet tekniċi, linji gwida dwar l-operazzjoni, manutenzjoni, issolvi l-problemi, u informazzjoni dwar il-partijiet żejda.