1. Prodott Aktarview
This manual provides instructions for the Transformers E0767 Shatter Energon Igniters Action Figure. This figure is designed to convert between robot and jet modes in 5 steps and features an Energon Igniter core for enhanced play.
- Ditta: Transformers
- Numru tal-Mudell: E0767
- Dimensjonijiet tal-Prodott: 2.38 x 7 x 6 pulzieri
- Piż tal-oġġett: 3.17 uqija
- Età Rakkomandata: 5 snin 'il fuq
The Shatter figure is part of the Transformers universe, allowing users to engage in imaginative play by transforming the character between its distinct modes.
Figure packaging displaying the Transformers Shatter character in both robot and jet forms.
2. Informazzjoni dwar is-Sigurtà
Please read and understand all safety information before using this product.
- Twissija: Small parts may be generated. This product is not suitable for children under 3 years due to potential choking hazards.
- Is-superviżjoni tal-adulti hija rakkomandata waqt il-logħob, speċjalment għat-tfal iżgħar.
- Avoid forcing parts during transformation to prevent breakage.
3. Transformation Instructions
The Transformers E0767 Shatter figure converts between robot mode and jet mode in 5 steps. Refer to the included visual instructions on the product packaging or the general transformation video for guidance.
3.1. Jet Mode to Robot Mode
To transform Shatter from jet mode to robot mode, carefully manipulate the figure's components. The transformation involves a sequence of folding and unfolding parts to reveal the robot form. Ensure each joint clicks into place securely.
The Shatter figure displayed in its sleek jet mode.
The Shatter figure in its robot mode, ready for action.
3.2. Robot Mode to Jet Mode
To convert Shatter back to jet mode, reverse the transformation steps. Fold the robot's limbs and body panels to form the jet's fuselage and wings. Pay attention to alignment to ensure a complete and secure transformation.
3.3. Energon Igniters Feature
The Energon Igniters feature allows for dynamic action. Locate the designated slot on the figure (typically on the back or top in vehicle mode) and insert the Energon Igniter core. Pressing down on the core activates a spinning action, simulating the power of Energon.
Activating the Energon Igniter by pressing down on the core in jet mode.
Removing the Energon Igniter core from the figure.
For a visual demonstration of the Energon Igniters feature and general transformations, please refer to the video below.
Wirja uffiċjali tal-vidjow ta' dimostrazzjoniasing various Transformers figures, including transformations and the Energon Igniters feature. This video provides a general overview of the play pattern for the Energon Igniters line.
4. It-Tħaddim tal-Figura
Once transformed into either robot or jet mode, the figure can be posed for display or used in imaginative play scenarios. The Energon Igniter core can be inserted and activated in vehicle mode to simulate power-up effects.
- Ensure all parts are securely connected after transformation to maintain stability during play.
- Avoid excessive force when posing joints to prevent damage.
5. Manutenzjoni u Kura
To ensure the longevity of your Transformers figure, follow these care guidelines:
- Tindif: Imsaħ il-figura b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ħażna: Aħżen il-figura f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Immaniġġjar: Handle the figure with care, especially during transformations, to avoid stress on joints and small parts.
6 Issolvi l-problemi
Jekk tiltaqa' ma' xi problemi bil-figura tiegħek, ikkunsidra dan li ġej:
- Diffikultà fit-Trasformazzjoni: Ensure you are following the correct sequence of steps. Do not force parts; if a part is stuck, gently re-examine the transformation path.
- Ġonot Laxki: Over time, joints may become slightly loose with repeated use. This is normal wear and tear for action figures.
- Partijiet Neqsin: Check the packaging thoroughly. If a part is genuinely missing upon purchase, contact the retailer or manufacturer.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 2.38 x 7 x 6 pulzieri |
| Piż tal-oġġett | 3.17 uqija |
| ASIN | B075LNDNBH |
| Numru tal-Mudell tal-Oġġett | E0767 |
| Età Rakkomandata mill-Manifattur | 5 snin 'il fuq |
| Data ta' Rilaxx | 20 ta’ April, 2018 |
| Manifattur | Hasbro |
| Komponenti Inklużi | Action Figure (Shatter) |
8. Garanzija u Appoġġ
Specific warranty information for this product is not provided in the available data. For warranty details, product support, or to inquire about replacement parts, please contact Hasbro customer service directly or refer to their official websit.
You can visit the official Transformers store for more information:
