Introduzzjoni
This instruction manual provides essential information for the proper setup, operation, and maintenance of your mDesign Steel Refillable Liquid Soap Dispenser Pump Bottles. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Two mDesign Hyde Collection bronze soap dispensers, showcasinid-disinn u l-finitura tagħhom.
Kontenut tal-Pakkett
- 2 x mDesign Steel Refillable Liquid Soap Dispenser Bottles
- 2 x Pump Mechanisms
Image: The product packaging indicating a two-pack of the bronze soap dispensers.
Setup Istruzzjonijiet
- Ippakkja: Carefully remove the soap dispensers and pump mechanisms from their packaging.
- Ipprepara għall-Mili: Unscrew the pump mechanism from the top of the dispenser bottle by turning it counter-clockwise.
- Imla l-Flixkun: Pour your desired liquid soap, dish soap, hand sanitizer, or essential oil blend into the bottle. Do not overfill; leave some space at the top to accommodate the pump mechanism.
- Reattach Pump: Carefully reinsert the pump mechanism into the bottle opening and screw it clockwise until securely tightened.
- Ipprajma l-Pompa: Press the pump head several times until the liquid begins to dispense. This may require 5-10 presses for initial use.
Image: Illustrates the process of refilling the soap dispenser by pouring liquid into the open bottle.
Istruzzjonijiet Operattivi
To dispense liquid, place your hand under the nozzle and press down firmly on the pump head. The pump is designed for smooth and consistent dispensing.
Image: A user demonstrating how to operate the soap dispenser by pressing the pump.
Manutenzjoni
- Tindif ta' barra: Imsaħ il-barra tad-dispenser b'ċarruta ratba u damp cloth and mild soap. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
- Tindif tal-Pompa: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You may need to pump warm water through the mechanism several times to clear any residue.
- Mili mill-ġdid: Refill the dispenser as needed following the "Setup Instructions" above.
- Ħażna: When not in use for extended periods, empty and clean the dispenser, then store it in a dry place.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Pump not dispensing liquid. | Bottle is empty or pump is not primed. | Refill the bottle and/or prime the pump by pressing it repeatedly until liquid appears. |
| Pump is stiff or sticky. | Residue buildup in the pump mechanism. | Remove the pump and rinse thoroughly with warm water. Pump warm water through the mechanism to clear blockages. |
| Liquid leaks from around the pump. | Pump not securely tightened or damaged seal. | Ensure the pump mechanism is screwed on tightly. If leaking persists, inspect the seal for damage. |
Speċifikazzjonijiet
- Ditta: mDesign
- Numru tal-Mudell: 9429MDBA
- Materjal: Metall
- Kulur: Bronż
- Product Dimensions (each): 2.6" T x 2.6" W x 8.25" G (6.6 ċm T x 6.6 ċm W x 21 ċm G)
- Liquid Volume: 8-il Uqija Fluwida (madwar 236 ml)
- Piż tal-Oġġett (kull wieħed): 14.4 uqija (madwar 408 gramma)
- Kwantità: 2 Għadd
- UPC: 841247194295
Image: A visual representation of the dispenser's dimensions, indicating a base diameter of 3.5 inches (8.9 cm) and a total height of 8.25 inches (21 cm).
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija jew appoġġ għall-prodott, jekk jogħġbok irreferi għall-indirizz uffiċjali tal-manifattur. webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.
Manifattur Websit: Ħanut Uffiċjali tal-mDesign
