Reality Leuchten R80911087 Paris GU10 Wall Spot Light Instruction Manual

1. Introduzzjoni

Thank you for choosing the Reality Leuchten R80911087 Paris GU10 Wall Spot Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Informazzjoni dwar is-Sigurtà

• Dejjem skonnettja l-provvista tal-enerġija qabel l-installazzjoni, il-manutenzjoni, jew is-sostituzzjoni tal-bozza.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew persuna kompetenti.
• Kun żgur li l-wiċċ tal-immuntar huwa adattat biex isostni l-piż tal-apparat.
• Dan il-prodott huwa ddisinjat għal użu fuq ġewwa biss (klassifikazzjoni IP20). Tesponihx għall-umdità jew temperaturi estremi.
• Use only GU10 bulbs with the specified wattage (max 35W). Bulb is not included.
• Do not cover the fixture with insulating material.

2. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-komponenti kollha huma preżenti u mhux imħassra:

• 1 x Reality Leuchten R80911087 Paris Wall Spot Light Unit
• 1 x Set of Mounting Hardware (screws, wall plugs)

Note: A GU10 bulb is NOT included and must be purchased separately.

Image 1: The Reality Leuchten R80911087 Paris GU10 Wall Spot Light unit, shown in titanium finish.

3. Setup u Installazzjoni

Follow these steps carefully to install your wall spot light:

1. Ipprepara għall-Installazzjoni:
   Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker. Use a voltage tester biex tikkonferma li l-enerġija hija mitfija.
2. Immarka l-Punti tat-Tħaffir:
   Hold the mounting bracket (usually integrated into the base of the fixture) against the wall at the desired installation location. Use a pencil to mark the positions for drilling.
3. Drill toqob:
   Ħaffer toqob fil-pożizzjonijiet immarkati billi tuża drill bit xieraq għat-tip ta’ ħajt tiegħek. Daħħal il-plakek tal-ħajt provduti fit-toqob imtaqqbin.
4. Qabbad il-Wiring:
   Carefully connect the household electrical wires to the terminal block on the fixture. Ensure correct polarity:
   
   • Live (L) wire (usually brown or red) to the 'L' terminal.
   • Neutral (N) wire (usually blue or black) to the 'N' terminal.
   • Earth/Ground wire (usually green/yellow) to the '⚡' terminal.
   Kun żgur li l-konnessjonijiet kollha huma siguri u li l-ebda wajers mikxufa ma jkunu esposti.
5. Immonta l-Apparat:
   Align the fixture's base with the drilled holes and secure it to the wall using the provided screws. Ensure the fixture is firmly attached and stable.
6. Insert GU10 Bulb:
   Insert a GU10 bulb (max 35W) into the lamp holder. Align the two pins of the bulb with the slots in the holder, push gently, and twist clockwise to lock it in place.
7. Irrestawra l-Enerġija:
   Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fis-circuit breaker.

Image 2: The wall spot light installed, demonstrating its compact design and adjustable head.

4. Istruzzjonijiet Operattivi

The Reality Leuchten R80911087 Paris Wall Spot Light is designed for simple operation:

• Tixgħil / Itfi: Control the light using your standard wall switch connected to the fixture's circuit.
• Aġġusta tad-Direzzjoni tad-Dawl: The spot head is adjustable, allowing you to direct the light beam as desired. Gently pivot the spot head to change its angle.
• Funzjonalità tad-Dimming: This fixture is dimmable. If connected to a compatible dimmer switch and used with a dimmable GU10 bulb, you can adjust the light intensity.

5. Manutenzjoni

Tindif

To maintain the appearance and functionality of your light fixture:

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Imsaħ l-apparat b'ċarruta ratba u niexfa.
• Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.

Sostituzzjoni tal-Bozza

Meta l-bozza teħtieġ li tinbidel:

1. Disconnect the power supply to the fixture.
2. Ħalli l-bozza l-qadima tiksaħ kompletament qabel ma timmaniġġaha.
3. Gently push the GU10 bulb into its holder and twist counter-clockwise to release it.
4. Insert a new GU10 bulb (max 35W) by aligning the pins, pushing gently, and twisting clockwise until it locks.
5. Irrestawra l-enerġija.

6 Issolvi l-problemi

If you encounter issues with your wall spot light, refer to the following common problems and solutions:

• Id-dawl ma jixgħelx:
  
  • Iċċekkja jekk il-provvista tal-enerġija għall-apparat hijiex attiva.
  • Ensure the bulb is correctly inserted and not faulty. Try replacing the bulb.
  • Verify that the wiring connections are secure and correct. (Consult a qualified electrician if unsure).
• Teptip tad-dawl:
  
  • Kun żgur li l-bozza tkun kompletament bilqiegħda fis-sokit.
  • If using a dimmable bulb with a dimmer switch, ensure compatibility between the bulb and dimmer.
  • Iċċekkja għal konnessjonijiet tal-wajers laxki.
• Light is too dim or too bright (without dimmer):
  
  • Tiżgura l-wat korretttagTintuża l-bozza e.
  • If a dimmer is installed, ensure it is set to the desired level.

7. Speċifikazzjonijiet

Technical details for the Reality Leuchten R80911087 Paris Wall Spot Light:

Image 3: Technical drawing showing the dimensions (in mm) of the wall spot light.

8. Garanzija u Appoġġ

For warranty information or technical support, please contact your retailer or the manufacturer, RL LIVE YOUR LIGHT, directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Reality Leuchten

Brand: RL LIVE YOUR LIGHT