Blum Blumotion Soft Close DampManwal tal-Installazzjoni u l-Utent (Mudell B970.1002-5)

1. Introduzzjoni

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampers

2. Informazzjoni dwar is-Sigurtà

Żomm partijiet żgħar 'il bogħod mit-tfal biex tevita perikli ta' fgar.
Dejjem uża għodda xierqa għall-installazzjoni.
Kun żgur li l-wiċċ tal-installazzjoni jkun nadif u ħieles mill-fdalijiet.
Do not attempt to modify the damper, as this may affect its performance and void any potential warranty.

3. Kontenut tal-Pakkett

Il-pakkett tiegħek għandu jkun fih l-oġġetti li ġejjin:

5 x Blum Blumotion Soft Close Dampers (Model B970.1002-5)

4. Installazzjoni

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

Identify Installation Location: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
Ħaffer it-Toqba: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
Daħħal id-Damper: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the damper.
Funzjonalità tat-Test: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.

Blum Blumotion Soft Close Damper, angled view

Figura 1: Angolat view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion Soft Close Damper, straight view

Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. Operazzjoni

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. Manutenzjoni

The Blumotion Soft Close Damper requires minimal maintenance:

Tindif: Periodically wipe the visible part of the damper b'artab, damp cloth to remove dust or grime. Avoid using harsh chemical cleaners.
Spezzjoni: Occasionally check that the damper remains securely in its drilled hole. If it becomes loose, it may need to be re-seated or the hole may require a small amount of adhesive for a tighter fit.
Kontroll tal-Funzjonalità: If the soft-closing action diminishes, ensure the damper is still making proper contact with the door.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Door does not close softly.	Damper not making proper contact with the door, or door is too heavy for a single damper.	Żgura li damper is positioned correctly. For heavier doors, consider installing an additional damper.
Damper falls out of the hole.	Hole is too large, or damper was not fully inserted.	Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.	Damper is faulty or not installed correctly.	Verify installation steps. If the issue persists, the damper may need replacement.

8. Speċifikazzjonijiet

Ditta: Blum
Numru tal-Mudell: B970.1002-5
Numru tal-Parti: B970.1002
Tip: Soft Close Damper (Bullet Hole Insert)
Insert Diameter: 10mm
Kulur: Griż
Item Weight (per damper): Madwar 0.14 uqija
Kwantità tal-Pakkett: 5

9. Garanzija u Appoġġ

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Blum Official Websit: www.blum.com

	Blum Hardware: Aġġustamenti bla Sforz għal Disinn ta' Kabinett Perfett Skopri kif is-sistemi innovattivi ta' rfigħ, is-sistemi tal-kaxxi, is-sistemi taċ-ċappetti, u s-sistemi tal-bwiet ta' Blum jippermettu aġġustamenti tridimensjonali mingħajr sforz għal allinjament perfett tal-kabinett u disinn bla difetti. Tgħallem dwar l-App EASY ASSEMBLY għal gwida rapida.
	Sistemi ta' Lift Blum AVENTOS: Ittejjeb il-Kabinetti Tiegħek Explore Blum's innovative AVENTOS lift systems for upper cabinets. Discover solutions for effortless access, smooth operation, and soft closing, designed to enhance kitchen and living spaces. Find detailed specifications and ordering information.
	Blum TIP-ON BLUMOTION għal TANDEMBOX: Karatteristiċi, Ippjanar, u Ordnijiet Gwida komprensiva għas-sistema TIP-ON BLUMOTION ta' Blum għall-kxaxen TANDEMBOX, dettalji tal-karatteristiċi, speċifikazzjonijiet tekniċi, informazzjoni dwar l-ordnijiet, u rekwiżiti ta' ppjanar għal tħaddim bla xkiel u silenzjuż tal-kxaxen.
	Istruzzjonijiet u Speċifikazzjonijiet tal-Installazzjoni ta' Blum TANDEM plus BLUMOTION 563F Istruzzjonijiet ta' installazzjoni u speċifikazzjonijiet għal runners tal-kxaxen moħbija b'estensjoni sħiħa Blum TANDEM plus BLUMOTION 563F. Tkopri t-tħejjija, l-immuntar, l-aġġustamenti tal-kaxxa tal-kxaxen, u t-tipi ta' applikazzjoni (qafas tal-wiċċ, mingħajr qafas, inset).
	Blum REVEGO Pocketsysteme: Planungs- und Bestellinformationen Entdecken Sie REVEGO Pocketsysteme von Blum für moderne Raumkonzepte. Dieses Dokument bietet detaillierte Planungs-, Auswahl- und Bestellinformationen für Einzeltür- und Doppeltüranwendungen.
	Sistemi ta' Lift Blum AVENTOS: Gwida Komprensiva tal-Prodott Esplora s-sistemi innovattivi ta' rfigħ AVENTOS minn Blum, iddisinjati għal kċejjen u kabinetti moderni. Skopri l-karatteristiċi, l-applikazzjonijiet, l-ippjanar, u d-dettalji tal-installazzjoni għal diversi mudelli bħal HF, HS, HL, HK, HK-S, u HK-XS, inklużi s-soluzzjonijiet SERVO-DRIVE u TIP-ON.

Blum B970.1002-5

Blum Blumotion Soft Close Damper

Mudell: B970.1002-5