Manwal ta' Istruzzjonijiet għal WELLAND Xkaffa Floating Bajda ta' 48 Pulzier b'Dawl LED li Jħoss il-Mess

1. Informazzjoni Importanti dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha bir-reqqa qabel l-assemblaġġ u l-użu. Żomm dan il-manwal għal referenza futura.

• Limitu tal-Piż: The maximum weight capacity for this shelf is 10 liri. Do not exceed this limit to prevent damage or injury.
• Immuntar: Ensure the shelf is securely mounted to a wall stud or using appropriate drywall anchors for stability. Improper installation can lead to the shelf falling.
• Sigurtà tal-batterija: Use only the specified battery type (3 x AA batteries per light, not included). Do not mix old and new batteries. Remove batteries if the product is not used for an extended period.
• Pjazzament: Avoid placing the shelf in areas with excessive moisture or direct heat sources.

2. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ:

• Xkaffa x1
• Dwal LED x2
• Accessory Bag (mounting hardware)
• Assembly Instruction (this manual)

Immaġni: Fuqview of the WELLAND Floating Shelf and its included components.

3. Speċifikazzjonijiet

Image: Detailed dimensions of the 48-inch floating shelf.

4. Setup u Installazzjoni

Follow these steps for proper installation of your floating shelf.

4.1. Ipprepara għall-Installazzjoni

• Għodod meħtieġa: You will need a drill, a level, a pencil or marker, and a screwdriver for installation.
• Post: Choose a suitable wall location. Consider mounting into wall studs for maximum stability. If mounting into drywall, use appropriate anchors (included in the accessory bag).

4.2. Mount the Shelf

• Immarkar: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole positions with a pencil.
• Tħaffir: Drill pilot holes at the marked positions. If mounting into drywall without a stud, insert the appropriate wall anchors.
• Bracket Sikur: Waħħal il-bracket tal-immuntar mal-ħajt billi tuża l-viti pprovduti. Kun żgur li huwa mwaħħal sew.
• Waħħal l-Ixkaffa: Slide the floating shelf onto the secured mounting bracket. The streamlined design hides the support for a clean, floating appearance.

4.3. Install LED Lights

• Open Light Unit: Twist the back cover of each LED light counter-clockwise to open it.
• Daħħal Batteriji: Insert 3 AA batteries into each LED light unit, ensuring correct polarity.
• Dwal Sikuri: Place the LED light units into the designated recesses on the underside of the shelf. Twist clockwise to secure them.

Image: Step-by-step guide for battery insertion and light installation.

5. Operating Instructions (LED Light)

The WELLAND Floating Shelf features touch-activated LED lights for convenient illumination.

• Tixgħel/Jitfi: To activate the LED light, gently touch the center of the light unit. To turn it off, touch the center again.
• Ħruġ tad-Dawl: The LED lights provide a gentle glow, ideal for accent lighting or reading.

6. Manutenzjoni

• Tindif: Wipe the shelf surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Sostituzzjoni tal-batterija: If the LED lights dim or stop working, replace the 3 AA batteries in each unit. Follow the installation steps in Section 4.3 to access and replace batteries.
• Spezzjoni: Periodically check the mounting hardware to ensure the shelf remains securely attached to the wall.

7 Issolvi l-problemi

8. Garanzija u Appoġġ

For any questions, concerns, or support regarding your WELLAND Floating Shelf, please contact the manufacturer directly. Specific warranty details may vary and are typically provided with your purchase documentation.

You can visit the official WELLAND store for more information and contact options: WELLAND Store