Manwal tal-Utent tar-Riċevitur Bluetooth Doppju MCP1337BT bi Kelliema

Introduzzjoni

Thank you for choosing the Dual MCP1337BT Bluetooth Receiver with Speakers. This manual provides detailed instructions for the installation, operation, and maintenance of your new audio system. Please read this manual thoroughly before use to ensure proper operation and to prevent damage.

Informazzjoni Importanti dwar is-Sigurtà

• Do not operate the unit in wet conditions.
• Kun żgur li l-konnessjonijiet tal-wajers kollha huma sikuri u iżolati sew biex tevita short circuits.
• Consult a qualified technician for installation if you are unsure about any steps.
• Żomm l-unità 'l bogħod mix-xemx diretta u mis-sħana eċċessiva.
• Use only specified power sources.

Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Dual MCP1337BT Bluetooth Receiver
• Two 6.5-inch Speakers (White)
• Kontroll mill-bogħod
• Antenna tal-Wajer
• Ħardwer tal-Immuntar (viti, parentesi)
• Qfil tal-Wajers
• Manwal għall-Utent (dan id-dokument)

Image: The complete Dual MCP1337BT system, including the main receiver unit, two white speakers, a remote control, and a wire antenna.

Prodott Overview

Receiver Front Panel Controls

Immaġni: Dettaljata view of the receiver's front panel, highlighting the LCD display, control knob, and various buttons.

1. Power/Mode Button (U): Press to turn the unit ON/OFF. Press briefly to cycle through modes (Radio, Bluetooth, USB, AUX).
2. Buttuna BAND: Selects radio bands (FM1, FM2, FM3, AM1, AM2).
3. AS/PS Button: Auto Store/Preset Scan for radio.
4. Volume Knob/RES: Dawwar biex taġġusta l-volum. Agħfas biex taċċessa s-settings tal-awdjo (Bass, Treble, Balance, Fader, EQ).
5. Buttuna MODE: Iċċikla bejn is-sorsi awdjo disponibbli.
6. Display (LCD): Shows current status, track information, and settings.
7. USB Port (USB 5V/1A): Connect USB devices for media playback and charging.
8. Input AUX: Jack ta' 3.5mm għal apparati awdjo esterni.
9. Buttuni Predefiniti (1-6): Store and recall radio stations. Also function as EQ presets (ĊATT, KLASSI, POP, BLAT).
10. Tune/Track Buttons (<< / >>): Tune radio stations or skip tracks.

Kontroll mill-bogħod

Image: The remote control for the Dual MCP1337BT, showing buttons for power, volume, mode, tuning, and track selection.

The remote control provides convenient access to most functions. Refer to the button labels on the remote for specific actions such as volume adjustment, mode selection, and track control.

Installazzjoni u Setup

Dijagramma tal-Wiring

A detailed wiring diagram is typically included with the product. Ensure correct connections for power, ground, speakers, and antenna. Incorrect wiring can damage the unit or vehicle electrical system.

• Red Wire (Accessory/Ignition): Connect to a switched 12V power source.
• Yellow Wire (Constant Power): Qabbad ma' sors ta' enerġija kostanti ta' 12V.
• Wajer Iswed (Art): Qabbad ma' ert nadif tax-chassis.
• Wajers tal-Ispeaker: Connect to the corresponding speaker terminals, ensuring correct polarity (+/-).
• Antenna: Connect the wire antenna to the designated input on the receiver.

Mounting the Receiver and Speakers

Mount the receiver in a secure, dry location. The speakers should be mounted in suitable enclosures or panels, ensuring they are securely fastened and free from obstructions.

1. Choose a suitable mounting location for the receiver, ensuring adequate ventilation.
2. Cut the necessary opening for the receiver using the provided template (if applicable).
3. Secure the receiver using the mounting sleeve and rear support strap.
4. Mount the speakers in desired locations, ensuring a tight seal and secure fit.

Istruzzjonijiet Operattivi

Operazzjoni Bażika

• Qawwa ON/OFF: Agħfas il- U buttuna.
• Kontroll tal-Volum: Dawwar il-pum tal-volum.
• Għażla tal-Modalità: Agħfas il- MODALITÀ buttuna jew il- U button briefly to switch between Radio, Bluetooth, USB, and AUX modes.

Operazzjoni tat-Tuner tar-Radju

• Agħżel il-Banda: Agħfas il- BANDA buttuna biex tiċċaqlaq minn FM1, FM2, FM3, AM1, AM2.
• Irfinar Manwali: Agħfas u żomm il- << or >> buttuni.
• Fittex l-Irfinar: Agħfas fil-qosor il- << or >> buttuni biex tfittex awtomatikament l-istazzjon qawwi li jmiss.
• Aħżen Presets: Tune to a desired station, then press and hold one of the preset buttons (1-6) until the display flashes.
• Recall Presets: Briefly press a preset button (1-6) to recall a stored station.
• Auto Store/Preset Scan (AS/PS): Agħfas AS/PS to automatically scan and store the strongest stations or to scan through stored presets.

Operazzjoni Bluetooth

• Tqabbil ta' Apparat:
  1. Kun żgur li l-Bluetooth huwa attivat fuq it-tagħmir mobbli tiegħek.
  2. Select Bluetooth mode on the receiver. The display will show "BTAUDIO" and "BT" icon will flash.
  3. On your mobile device, search for Bluetooth devices and select "DUAL BT".
  4. Once paired, the "BT" icon will stop flashing and remain solid.
• Streaming tal-Awdjo: Once paired, you can stream audio from your device. Use the << / >> buttuni biex taqbeż il-binarji.

Daqq USB

• Daħħal flash drive USB fil-port USB. L-unità awtomatikament taqleb għall-modalità USB u tibda ddoqq awdjo kompatibbli. files (MP3).
• Uża l- << / >> buttuni biex jinnavigaw binarji.

Input Awżiljarju

• Connect an external audio device to the 3.5mm AUX input jack using an audio cable.
• Select AUX mode on the receiver.
• Ikkontrolla l-plejbek mill-apparat konness.

Sound Settings (EQ)

• Press the volume knob briefly to cycle through audio settings like BASS, TREBLE, BALANCE, FADER. Rotate the knob to adjust values.
• Use the preset buttons (1-6) for quick EQ presets: ĊATT, KLASSI, POP, BLAT.

Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf l-unità. Tużax prodotti tat-tindif jew solventi li joborxu.
• Konnessjonijiet: Iċċekkja l-konnessjonijiet tal-wajers kollha perjodikament biex tiżgura li huma sikuri.
• Ambjent: Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight for extended periods.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ għall-Klijent

Dual products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Dual website. For technical support or service inquiries, please contact Dual customer service.

Nota: L-ispeċifikazzjonijiet u l-karatteristiċi tal-prodott jistgħu jinbidlu mingħajr avviż.