1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and troubleshooting of the avedio links HDMI Extender. This device allows for the extension of HDMI audio and video signals over a single Cat5e/6/7 Ethernet cable, supporting resolutions up to 1080P Full HD and 3D, over distances up to 196 feet (60 meters).
The extender consists of a Transmitter (TX) unit and a Receiver (RX) unit, designed for reliable signal transmission in various environments such as home entertainment, digital signage, and conference rooms.
2. Kontenut tal-Pakkett
- 1x HDMI Extender Transmitter (TX) Unit
- 1x HDMI Extender Receiver (RX) Unit
- 2x DC 5V Power Adapters
- 1x Manwal għall-Utent
Ensure all items are present and undamaged. Contact customer support if any components are missing or faulty.
3. Karatteristiċi tal-prodott
- Extends HDMI signal up to 196 feet (60 meters) using a single Cat6/7 cable.
- Supports Cat5e cable up to 165 feet (50 meters).
- Supports Full HD 1080P resolution (1920x1080@60Hz) and 3D.
- Compatible with HDMI 1.4a and HDCP 1.4.
- Supports deep color up to 36 bits.
- Supports uncompressed digital audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby-AC3, and DSD.
- Features EDID copy/reset functionality for display compatibility.
- Plug and play operation, no driver installation required.
- Built-in automatic adjustment system for stable signal transmission.
4. Identifikazzjoni tal-Komponent
4.1 Transmitter (TX) Unit
- LED tal-Istatus: Indicates power and signal status.
- Input HDMI: Connects to the HDMI source device.
- DC/5V: Port tad-dħul tal-enerġija.
- Buttuna EDID: For EDID management.
- CAT5e/6/7 Output (RJ45): Connects to the Receiver unit via Ethernet cable.
4.2 Receiver (RX) Unit
- LED tal-Istatus: Indicates power and signal status.
- Ħruġ HDMI: Connects to the HDMI display device.
- DC/5V: Port tad-dħul tal-enerġija.
- CAT5e/6/7 Input (RJ45): Connects to the Transmitter unit via Ethernet cable.
5. Istruzzjonijiet ta' Setup
Follow these steps to set up your avedio links HDMI Extender:
- Apparat mitfi: Ensure all HDMI source devices (e.g., PC, Blu-ray player, Fire Stick) and display devices (e.g., HDTV, projector) are powered off before making connections.
- Connect HDMI Source to TX: Use a high-quality HDMI cable to connect your HDMI source device to the Input HDMI port on the Transmitter (TX) unit.
- Connect TX to RX via Ethernet: Connect one end of a Cat5e/6/7 Ethernet cable to the CAT5e/6/7 Output (RJ45) port on the Transmitter (TX) unit. Connect the other end of the Ethernet cable to the CAT5e/6/7 Input (RJ45) port on the Receiver (RX) unit.
- For optimal performance, a Cat6 or Cat7 cable is recommended.
- Maximum length for Cat6/7 is 196 feet (60 meters).
- Maximum length for Cat5e is 165 feet (50 meters).
- Avoid using flat Ethernet cables or Cat5 cables, as they may not provide stable transmission.
- Connect RX to HDMI Display: Use a high-quality HDMI cable to connect your HDMI display device to the Ħruġ HDMI port on the Receiver (RX) unit.
- Applika l-Enerġija: Connect the included DC 5V power adapters to the DC/5V ports on both the Transmitter (TX) and Receiver (RX) units. Plug the power adapters into a power outlet. The Status LEDs on both units should illuminate.
- Apparat ta' Qawwa: Power on your HDMI display device first, then power on your HDMI source device. The video and audio signal should now be extended to your display.
6. Ġestjoni EDID
The EDID (Extended Display Identification Data) function ensures compatibility between the source and display devices. The avedio links HDMI Extender features an EDID button on the Transmitter (TX) unit for managing display information.
- EDID Copy Mode:
- Connect your primary display directly to the HDMI source device.
- Connect the HDMI Extender as described in Section 5, ensuring the display is connected to the RX unit's HDMI output.
- With all devices powered on and a signal present, press the buttuna EDID on the Transmitter (TX) unit once. The extender will copy the EDID information from the connected display to ensure optimal compatibility.
- EDID Reset Mode:
- If you encounter display issues or wish to revert to a default EDID setting, press and hold the buttuna EDID on the Transmitter (TX) unit for 3 seconds. This will reset the EDID to a default 1080p 3D stereo setting.
7 Issolvi l-problemi
If you experience issues with the HDMI Extender, refer to the following troubleshooting steps:
- No Picture or Signal:
- Ensure both the TX and RX units are powered on and their Status LEDs are illuminated.
- Verify all HDMI and Ethernet cables are securely connected.
- Test the HDMI cables directly between the source and display to confirm they are functional.
- Ensure the Ethernet cable is a Cat5e, Cat6, or Cat7 cable and is within the recommended length limits (165ft for Cat5e, 196ft for Cat6/7). Avoid Cat5 cables.
- Try a different Ethernet cable, preferably a high-quality Cat6 or Cat7 UTP cable. Flat cables may cause issues.
- Perform an EDID copy (refer to Section 6) to ensure compatibility with your display.
- Try resetting the EDID to default (refer to Section 6).
- Power cycle all devices (source, extender units, display) in the correct order: display first, then source.
- Sinjal li jteptep jew intermittenti:
- This often indicates a poor quality or excessively long Ethernet cable. Replace the Ethernet cable with a shorter, higher-quality Cat6 or Cat7 cable.
- Ensure there are no strong electromagnetic interference sources near the Ethernet cable.
- Check power connections for stability.
- Ebda Awdjo:
- Ivverifika s-settings tal-awdjo fuq l-apparat u d-displej tas-sors tiegħek.
- Kun żgur li l-kejbils HDMI jappoġġjaw it-trażmissjoni tal-awdjo.
- Perform an EDID copy or reset.
- Picture Quality Issues (e.g., blurry, color distortion):
- Check the resolution settings on your source device. Ensure it is compatible with the extender and display.
- Use shorter, higher-quality HDMI and Ethernet cables.
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Verżjoni HDMI | HDMI 1.4a |
| Verżjoni HDCP | HDCP 1.4 |
| Riżoluzzjonijiet Appoġġjati | 1080p/1080i/720p/576p/576i/480p/480i (24/50/60fs) |
| Appoġġ 3D | Iva |
| Appoġġ għall-Kulur Deep | 36-il bit |
| Faxxa ta 'Trażmissjoni Max | 6.75 Gbps |
| Formati Awdjo Appoġġjati | DTS-HD/Dolby-true HD/DTS/Dolby-AC3/DSD |
| Ethernet Cable Requirement | Cat5e/6/7 (UTP recommended) |
| Max Extension Distance (Cat5e) | 165 pied (50 metri) |
| Max Extension Distance (Cat6/7) | 196 pied (60 metri) |
| Input/Output HDMI Cable Distance | Up to 49 feet (15 meters) AWG26 HDMI standard cable |
| Provvista tal-Enerġija | DC 5V/1A (2 units included) |
| Temperatura operattiva | 0°C sa 40°C (32°F sa 104°F) |
| Umdità Operattiva | 5% sa 90% RH (mhux kondensazzjoni) |
| Dimensions (each unit) | Madwar 5.31 x 3.94 x 2.76 pulzieri (Dimensjonijiet tal-Pakkett) |
| Weight (each unit) | Madwar 8.8 uqija (Piż tal-Oġġett) |
9. Informazzjoni dwar is-Sigurtà
- Tesponix din l-unità għall-ilma, umdità, jew umdità eċċessiva.
- Tpoġġix l-unità fid-dawl tax-xemx dirett jew ħdejn sorsi tas-sħana.
- Use only the provided power adapters. Using unauthorized power adapters may damage the device and void the warranty.
- Tippruvax tiftaħ jew issewwi l-unità int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
- Żomm l-apparat 'il bogħod mit-tfal.
- Ensure proper ventilation around the units to prevent overheating.
10. Appoġġ għall-Klijent
For technical assistance or product inquiries, please contact avedio links customer support. Refer to the product packaging or the official avedio links websit għal informazzjoni ta' kuntatt.
Please have your product model number (HDMI Extender 196FT) and purchase details ready when contacting support.
