1. Prodott Aktarview
The Genasun GV-10-Li-14.2V is a high-performance Maximum Power Point Tracking (MPPT) solar charge controller designed specifically for 4S Lithium Iron Phosphate (LiFePO4) batteries. It efficiently converts solar panel power to charge your battery system, ensuring optimal performance and longevity.
Stampa 1.1: Quddiem view of the Genasun GV-10-Li-14.2V MPPT Charge Controller, showing the model name, battery type, charging current, and LED indicators.
Karatteristiċi ewlenin:
- Iċċarġjar ottimizzat: Max. recommended panel power 140 W, 10.5 A charging current, charge profile CC/CV at 14.2 V for 4S LiFePO4 (3.55 V per cell).
- High-Speed MPPT: Features a tracking speed of 15 Hz (15 times per second) for efficient power harvesting.
- Effiċjenza Għolja: Achieves 98.3% peak efficiency with a tiny night consumption of 0.9 mA.
- Protezzjonijiet Avvanzati: Includes electronic protections for reverse panel and battery polarity.
- Durability & Compliance: Made in the USA, certified cETLus, Class 1 Div.2, and conforms to CE, FCC, RoHS standards.
2. Setup u Installazzjoni
Proper installation is crucial for the safe and efficient operation of your Genasun GV-10-Li-14.2V charge controller. Follow these steps carefully.
2.1 Dijagramma tal-Wiring
Image 2.1: Wiring diagram for the Genasun GV-10-Li-14.2V controller, illustrating connections for a 4S LiFePO4 battery and a solar panel. The diagram shows the positive and negative terminals for both battery and panel connections, and the location of the multicolor LED indicator.
2.2 Passi ta' Konnessjoni
- Qabbad il-Batterija l-Ewwel: Connect the positive (+) and negative (-) terminals of your 4S LiFePO4 battery to the 'BATT' terminals on the charge controller. Ensure correct polarity. The controller will not operate without a battery connected.
- Qabbad Solar Panel: Connect the positive (+) and negative (-) terminals of your solar panel to the 'PANEL' terminals on the charge controller. Ensure correct polarity.
- Ivverifika l-Konnessjonijiet: Double-check all connections for correct polarity and secure fastening. Incorrect polarity can damage the unit, although the controller has built-in protection.
The controller is designed for simple plug-and-play operation. Once connected, it will automatically begin tracking the maximum power point of your solar panel and charging the battery.
3. Istruzzjonijiet Operattivi
The Genasun GV-10-Li-14.2V operates autonomously once connected. The multicolor LED provides status indications.
3.1 Status tal-Indikatur LED
- Aħdar (Solid): Battery is fully charged, or the controller is in standby mode (e.g., no solar input, or battery is at float voltagu).
- Aħdar (Li jteptep): Battery is currently charging. The flash rate may vary with charging intensity.
- Aħmar (Solid): Indicates an error condition. This could be due to incorrect wiring, over-voltage from the panel, or a battery fault. Disconnect all power and re-check connections.
3.2 MPPT Operation
The controller continuously tracks the maximum power point of the solar panel to extract the most power available. This high-speed tracking (15 times per second) ensures optimal energy harvest even under rapidly changing light conditions.
4. Manutenzjoni
The Genasun GV-10-Li-14.2V is designed for minimal maintenance. However, periodic checks can ensure long-term reliability.
- Spezzjoni Viżwali: Periodically inspect the controller and all wiring for any signs of damage, corrosion, or loose connections.
- Tindif: Keep the controller free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- Ventilazzjoni: Ensure the controller is installed in a location with adequate airflow to prevent overheating, although its design is highly efficient.
5 Issolvi l-problemi
If you encounter issues with your Genasun GV-10-Li-14.2V, refer to the following troubleshooting guide.
- L-ebda Attività tal-LED:
- Kun żgur li l-batterija tkun imqabbda l-ewwel u li jkollha biżżejjed vultaġġtage. The controller requires battery power to operate.
- Iċċekkja l-polarità tal-batterija.
- Red LED (Error):
- Disconnect both the solar panel and the battery.
- Re-connect the battery first, then the solar panel, ensuring correct polarity for both.
- Verify that the solar panel voltage ma jaqbiżx il-volum massimu tad-dħul tal-kontrollurtage (34V max).
- Batterija Mhux Iċċarġja:
- Check solar panel connections and ensure the panel is receiving adequate sunlight.
- Ivverifika li l-batterija voltage is below the full charge voltage (14.2V). If the battery is already full, the controller will enter standby mode (solid green LED).
- Ensure the solar panel is producing sufficient voltage u kurrenti.
If problems persist after following these steps, contact Genasun customer support.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | GV-10-Li-14.2V |
| Tip ta 'batterija | 4S LiFePO4 (Lithium Iron Phosphate) |
| Kurrent tal-Iċċarġjar | 10.5 A |
| Charge Profile | CC/CV at 14.2 V (3.55 V per cell) |
| Qawwa Massima Rakkomandata tal-Panel | 140 W |
| Max. Panel Voltage (OCV) | 34 V |
| MPPT Tracking Speed | 15 Hz (15 times per second) |
| L-ogħla Effiċjenza | 98.3% |
| Night Consumption | 0.9 mA |
| Protezzjonijiet | Reverse panel and battery polarity |
| Materjal | Metall |
| Piż tal-oġġett | 6.6 uqija (0.41 Libbra) |
| Ċertifikazzjonijiet | cETLus, Class 1 Div.2, CE, FCC, RoHS |
| UPC | 650267227261 |
7. Informazzjoni dwar Garanzija
The Genasun GV-10-Li-14.2V MPPT Charge Controller comes with a 5-Sena GaranzijaDin il-garanzija tkopri difetti fil-materjali u fix-xogħol taħt użu normali. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
8. Appoġġ
For technical assistance, warranty claims, or further inquiries regarding your Genasun GV-10-Li-14.2V MPPT Charge Controller, please contact Genasun customer support. As a product made in the USA, dedicated support is available to assist you.
Image 8.1: Genasun brand logo.
