Manwal tal-Utent tas-Siġġu Eżekuttiv tal-Uffiċċju La-Z-Boy Delano Big & Tall

Informazzjoni Importanti dwar is-Sigurtà

Please read and understand all instructions before assembling and using this chair. Retain this manual for future reference.

• Always check the instructions manual for detailed safety guidelines.
• Toqgħodx fuq is-siġġu.
• Tużax is-siġġu bħala banketta.
• Kun żgur li l-boltijiet u l-viti kollha huma ssikkati sew qabel l-użu. Iċċekkja perjodikament u erġa' ssikka kif meħtieġ.
• Tużax is-siġġu jekk xi partijiet ikunu neqsin, bil-ħsara, jew milbusa. Ikkuntattja l-appoġġ għall-klijenti għal partijiet ta' sostituzzjoni.
• This chair is designed for single-person use.
• Maximum weight capacity: 350 pounds. Do not exceed this limit.
• Żomm lit-tfal 'il bogħod mis-siġġu waqt l-assemblaġġ. Partijiet żgħar jistgħu jkunu perikolużi biex wieħed jifga.

Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, kun żgur li l-komponenti kollha elenkati hawn taħt huma preżenti u mhux imħassra. Jekk xi partijiet huma nieqsa jew imħassra, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

Figura 1: Dimensjonijiet u Komponenti tal-Prodott 'il Fuqview. This diagram illustrates the overall dimensions of the chair and highlights key components such as the seat, backrest, arms, and base.

Komponenti Mistennija:

• Dahar tas-siġġu
• Chair Seat Cushion
• Serħan tad-dirgħajn (Xellug u Lemin)
• Chair Base (5-star)
• Roti (5 biċċiet)
• Ċilindru tal-Lift tal-Gass
• Pjanċa tal-Mekkaniżmu
• Kit tal-Ħardwer (viti, woxers, Allen wrench)

Setup u Assemblea

Assembly is straightforward and typically takes about 30 minutes. For best results and safety, it is recommended to assemble the chair with two people.

1. Waħħal ir-Roti mal-Bażi: Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Insert Gas Lift into Base: Place the larger end of the gas lift cylinder into the center hole of the assembled chair base. Do not push down on the gas lift plunger at this stage.
3. Waħħal il-Pjanċa tal-Mekkaniżmu mas-Sedil: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with the provided screws, tightening them evenly.
4. Waħħal id-Dirgħajn mas-Sedil: Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten the screws yet, allow for slight adjustment.
5. Attach Backrest to Seat/Arms: Slide the backrest into the brackets on the armrests and align with the holes on the seat. Secure the backrest to the armrests and seat using the remaining screws. Once all screws are in place, fully tighten all armrest and backrest screws.
6. Qabbad l-Assemblea tas-Sedil mal-Lift tal-Gass: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the mechanism plate's center hole aligns with the top of the gas lift. Press down firmly to secure.

Figura 2: Assemblaġġ Fuqview. The La-Z-Boy Delano chair is designed for quick and easy assembly, with all necessary hardware included.

Figure 3: Fully Assembled La-Z-Boy Delano Chair. This image displays the completed chair, ready for use.

Note: No relevant official product videos for assembly were found.

Istruzzjonijiet Operattivi

The La-Z-Boy Delano chair offers several adjustments to customize your seating experience for optimal comfort and support.

Aġġusta l-Għoli tas-Sedil

To adjust the seat height, locate the lever on the right side of the chair, beneath the seat cushion. While seated, lift the lever to raise the seat. To lower the seat, lift the lever while applying slight body weight to the seat. Release the lever at the desired height.

Figure 4: Seat Height Customization. The right-side tab allows for easy adjustment of the chair's height to suit individual needs.

Adjusting Recline and Tilt Tension

The chair features a recline function and adjustable tilt tension. To recline, locate the lever on the left side of the chair, beneath the seat cushion. Pull the lever outwards to unlock the recline function, allowing the backrest to tilt. Push the lever inwards to lock the backrest in an upright position.

To adjust the tilt tension, rotate the round knob located at the front, underneath the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

Figure 5: Recline and Relax. Easy-reach control tabs allow for personalized recline adjustment, with a knob to adjust tilt tension.

Lumbar Support and ComfortCore Cushioning

The Delano chair is designed with a pillowed lumbar zone and ComfortCore with memory foam cushioning to provide enhanced support and comfort throughout extended use. These features are integrated into the chair's design and do not require manual adjustment.

Figure 6: Exceptional Lumbar Support. The advanced lumbar zone promotes proper spinal alignment.

Figure 7: ComfortCore with Memory Foam. This multi-layered seat cushion provides body-hugging comfort for extended use.

Manutenzjoni u Kura

Proper care and maintenance will extend the life and appearance of your La-Z-Boy Delano Executive Office Chair.

• Tindif: Spot clean the bonded leather upholstery with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
• Finitura tal-Injam: For the mahogany wood accents, wipe with a soft, dry cloth. Avoid excessive moisture.
• Xandara: Periodically clean the casters to remove dust, hair, and debris that may hinder smooth movement.
• Qafliet: Every six months, check all bolts and screws to ensure they are tight. Re-tighten as necessary to maintain stability and prevent squeaking.
• Evita dawl tax-xemx dirett: Prolonged exposure to direct sunlight can cause the bonded leather to fade or crack. Position the chair away from direct sunlight when possible.

Issolvi l-problemi

Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet potenzjali tagħhom.

Speċifikazzjonijiet

Key technical specifications for the La-Z-Boy Delano Executive Office Chair.

Figure 8: Built to Last. All parts and construction meet BIFMA industry standards for safety, quality, and durability, including a heavy-duty Class III gas lift rated to 350 lbs.

Informazzjoni dwar Garanzija

The La-Z-Boy Delano Executive Office Chair is covered by the manufacturer's limited warranty. Specific warranty terms and conditions, including coverage duration and what is covered, are typically provided with your purchase documentation or can be obtained by contacting La-Z-Boy customer support directly. Please retain your proof of purchase for warranty claims.

Appoġġ għall-Klijent

For further assistance, replacement parts, or warranty inquiries, please contact La-Z-Boy customer support.

• Websit: www.trueinnovations.com
• Email: service@trueinnovations.com
• Ħinijiet ta' Appoġġ bit-Telefon: 7am - 4pm PST (10am - 7pm EST)

A dedicated U.S. based team is available to assist with your La-Z-Boy chair and any help needed with its assembly or operation.

Tista' wkoll tirreferi għall-manwal uffiċjali tal-utent fil-PDF għal aktar dettalji: Niżżel il-Manwal tal-Utent (PDF)