Introduzzjoni
The Klein Tools NCVT-4IR is a versatile tool designed for professionals, combining non-contact AC voltage detection with an integrated infrared (IR) thermometer. This manual provides essential information for safe and effective operation of your device.

Image: The Klein Tools NCVT-4IR device, a yellow and black pen-style tool, shown from an angled perspective.
Informazzjoni dwar is-Sigurtà
Always prioritize safety when using electrical testing equipment. Read and understand all instructions before operation.
- Tidderieġix ir-raġġ tal-lejżer lejn l-għajnejn, peress li dan jista 'jikkawża ħsara permanenti lill-għajnejn.
- Read, understand, and follow all instructions, cautions, and warnings attached to and/or packed with all Test & Measurement devices before each use.
- It-termometru MHUX maħsub għall-użu fuq in-nies jew l-annimali.
- Test on a known live circuit before use to confirm proper operation.
Karatteristiċi tal-Prodott
- Mhux Kuntatt AC Voltage Detection: 12 to 1000V AC.
- Integrated Infrared Thermometer: Measures temperatures from -22 to 482°F (-30 to 250°C).
- Laser Pointer: For targeting temperature measurement areas.
- Visual and Audible Indicators: For voltagSejbien.
- Dust and Water Resistant: IP40 rating.
- Pocket Clip: For convenient portability.

Image: An infographic highlighting key features of the NCVT-4IR, such as its infrared thermometer range, AC voltage detection, and LCD backlit display.
Konfigurazzjoni u Installazzjoni tal-Batterija
- To install or replace batteries, twist the end cap counter-clockwise to remove it.
- Insert two new AAA 1.5V batteries, ensuring correct polarity (+/-).
- Replace the end cap and twist clockwise until secure. Ensure the cap is fully tightened for proper operation and IP40 rating.
- To prevent accidental activation and battery drain during storage, slightly loosen the end cap to disengage battery contact.
Istruzzjonijiet Operattivi
Mhux Kuntatt Voltage Testing (NCVT)
- Agħfas il- NCV button to activate the non-contact voltage detection mode. The tip will illuminate blue.
- Place the tester's tip near the conductor, outlet, or circuit you wish to test.
- Jekk AC voltage is detected (12V to 1000V), the tip will glow red, and an audible alarm will sound. The intensity of the visual and audible indicators increases with voltage strength or proximity to the source.
- Always test on a known live circuit first to ensure the tester is functioning correctly.
Infrared Thermometer (IR)
- Agħfas il- IR button to activate the infrared thermometer. The laser pointer will activate to help aim.
- Point the laser at the surface you wish to measure. The temperature will be displayed on the LCD screen.
- The temperature range is -22 to 482°F (-30 to 250°C).
- To switch between Fahrenheit and Celsius, press and hold the IR button.

Image: The NCVT-4IR being used to measure the temperature of an electrical component, with the laser pointer visible.
Manutenzjoni
- Keep the device clean and free from dust and debris. Use a dry, lint-free cloth for cleaning.
- Ibdel il-batteriji minnufih meta l-indikatur ta' batterija baxxa jidher fuq id-displej biex tiżgura qari preċiż.
- Aħżen l-apparat f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Issolvi l-problemi
- Ebda Qawwa/Wiri Mitfi: Check battery installation and ensure the end cap is fully tightened. Replace batteries if necessary.
- Inaccurate NCV Readings: Ensure the tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors can sometimes affect sensitivity.
- Inaccurate IR Readings: Ensure the laser is aimed directly at the target surface. Reflective surfaces can affect accuracy.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | NCVT-4IR |
| AC Voltage Firxa | 12V sa 1000V AC |
| Firxa tat-Temperatura IR | -22 sa 482 ° F (-30 sa 250 ° C) |
| Tip ta' Laser | Klassi 2 |
| Proporzjon tad-Distanza għal-Spot | 4:1 |
| Klassifikazzjoni tal-Protezzjoni tad-Dħul (IP). | IP40 (Dust Resistant) |
| Sors tal-Enerġija | 2 x batteriji AAA (inklużi) |
| Dimensjonijiet | 6.26 x 1.08 x 1.21 pulzieri |
| Piż | 2 uqija |
Garanzija u Appoġġ
Klein Tools products are designed for durability and performance. For warranty information or technical support, please refer to the official Klein Tools webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.





