Introduzzjoni
This manual provides instructions for the Master Lock 5KA-A297 2-inch Keyed Alike Laminated Padlocks. These padlocks are designed for security in various applications, featuring durable construction and a keyed-alike system for convenience. Please read these instructions carefully before use to ensure proper operation and longevity of your product.
Prodott Overview
Stampa 1: A Master Lock 5KA-A297 laminated padlock shown with two brass keys. The padlock features a silver body with black accents and a chrome shackle. The word "COMMERCIAL" is visible on the black band near the shackle, and "Master" is visible on the lower black band.
The Master Lock 5KA-A297 padlocks are a set of seven 2-inch wide laminated padlocks, all operating with the same key (keyed alike to key #A297). Each padlock features:
- Kostruzzjoni Durabbli: Laminated steel bodies provide strength, complemented by a hardened boron alloy shackle for enhanced cut resistance.
- Sigurtà Avvanzata: A 4-pin cylinder mechanism is designed to resist picking, and dual locking levers provide additional resistance against prying attempts.
- Reżistenza għall-korrużjoni: Proprietary rustproofing is applied to extend the product's life, particularly in outdoor or damp ambjenti.
- Dimensjonijiet: Each padlock has a 2-inch (51mm) wide case, a 3/8-inch (10mm) shackle diameter, and a 1-inch (25mm) vertical shackle clearance. The horizontal shackle clearance measures 15/16 inch (24mm).
- Key Compatibility: For key duplication, compatible key blanks include Master Lock Key Blank K1BOX or Ilco Blank M1.
Setup
The Master Lock 5KA-A297 padlocks are ready for immediate use upon receipt. No assembly is required.
- Ippakkja: Carefully remove all padlocks and keys from their packaging.
- Spezzjona: Verify that all seven padlocks and their corresponding keys are present and in good condition.
- Identifikazzjoni Ewlenija: Note that all keys provided will operate all padlocks in this set, as they are keyed alike to key #A297.
- Operazzjoni tat-Test: Before deployment, insert a key into each padlock and test its locking and unlocking mechanism to ensure smooth operation.
Istruzzjonijiet Operattivi
Biex tiftaħ il-katnazz:
- Insert one of the provided keys into the keyway located at the bottom of the padlock.
- Dawwar iċ-ċavetta lejn l-arloġġ madwar kwart ta' dawra (90 grad).
- Pull the shackle upwards to release it from the padlock body.
- Remove the key by turning it counter-clockwise back to its original position and pulling it out. The shackle will remain open until locked again.
Biex Tissakkar il-Katnazz:
- Kun żgur li l-qafla tkun fil-pożizzjoni miftuħa.
- Align the shackle with the openings in the padlock body.
- Push the shackle firmly downwards into the padlock body until you hear a click. This sound indicates the padlock is securely locked.
- Gently pull on the shackle to confirm it is locked. No key is required to lock the padlock.
Manutenzjoni
Proper maintenance ensures the longevity and reliable operation of your Master Lock padlocks.
- Lubrikazzjoni: Periodically apply a small amount of graphite lubricant or a silicone-based lubricant (avoid oil-based lubricants as they can attract dirt and gum up the mechanism) into the keyway and around the shackle mechanism. This helps maintain smooth operation and prevents corrosion.
- Tindif: Keep the padlock clean from dirt, dust, and debris. Use a soft cloth to wipe down the body and shackle.
- Ħażna: When not in use, store padlocks in a dry environment to further protect against moisture and rust.
- Kura Ewlenija: Keep keys clean and avoid bending or damaging them. Store spare keys in a secure, accessible location.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Iċ-ċavetta hija diffiċli biex iddaħħalha jew iddawwarha. | Ħmieġ jew debris fil-kanal taċ-ċavetta; nuqqas ta' lubrikazzjoni; ċavetta mgħawġa. | Clean keyway with compressed air. Apply graphite or silicone lubricant. Inspect key for damage; use a different key if available. |
| Shackle is stiff or difficult to open/close. | Corrosion or dirt in the shackle mechanism; lack of lubrication. | Apply lubricant to the shackle entry points and work the shackle. Clean any visible debris. |
| Padlock does not lock when shackle is pushed down. | Obstruction in the locking mechanism; shackle not fully aligned. | Ensure shackle is properly aligned with the body holes. Check for any foreign objects preventing the shackle from fully engaging. |
Speċifikazzjonijiet
- Ditta: Master Lock
- Numru tal-Mudell: 5KA-A297
- Tip ta' serratura: Lock Key
- Keying: Keyed Alike (Key #A297)
- Materjal: Laminated Steel Body, Hardened Boron Alloy Shackle
- Temm: Laminated, Rustproofed
- Wisa' tal-Każ: 2 pulzieri (51mm)
- Dijametru tal-qajd: 3/8 pulzier (10mm)
- Vertical Shackle Clearance: 1 pulzier (25mm)
- Horizontal Shackle Clearance: 15/16 pulzier (24mm)
- Ċilindru: Tazza b'4 pinnijiet
- Numru ta' Biċċiet: 7 katnazz
- Item Weight (per padlock): Madwar 0.8 liri (12.8 uqija)
- Product Dimensions (per padlock L x W x H): 2.1 x 3.1 x 1.3 pulzieri
- UPC: 071649024771
Informazzjoni dwar Garanzija
Master Lock products are manufactured to high standards. For specific warranty details, including terms and conditions, please refer to the official Master Lock website or contact their customer service directly. Warranty coverage typically addresses manufacturing defects.
Appoġġ għall-Klijent
For further assistance, technical support, or to inquire about replacement parts or keys, please visit the official Master Lock websit:
You can also find contact information for Master Lock customer service on their official corporate websit.
