1. Prodott Aktarview
The OPTO-EDU A22.1201-C1 is a professional binocular stereo microscope designed for detailed inspection and manipulation of large-scale specimens. It features interchangeable wide-field eyepieces, a 1X objective, and adjustable LED lighting mounted on a flexible gooseneck. The robust boom-arm stand provides a long working distance and allows for versatile positioning of the microscope head.
Figura 1: B'mod ġenerali view of the OPTO-EDU A22.1201-C1 Professional Binocular Stereo Microscope, showing the binocular head, boom arm, LED light, and base.
2. Prekawzjonijiet tas-Sigurtà
- Always handle the microscope with care to prevent damage to optical components.
- Ensure the microscope is placed on a stable, level surface to prevent tipping, especially when extending the boom arm.
- Skonnettja l-korda tal-enerġija qabel ma tnaddaf jew tagħmel xi manutenzjoni.
- Do not expose the microscope to direct sunlight or high temperatures.
- Uża biss il-vol speċifikattage (110V-120V) for operation.
3. Setup u Assemblea
Segwi dawn il-passi biex tiġbor il-mikroskopju tiegħek:
- Spakkjar: Carefully remove all components from the packaging. Verify that all parts listed in the "What's in the Box" section are present.
- Base and Pillar Assembly: Place the heavy base on a stable workbench. Insert the vertical pillar into the designated hole on the base and secure it firmly using the locking screw.
- Boom Arm Attachment: Slide the boom arm onto the vertical pillar. Adjust its height and secure it with the large black knob on the pillar.
- Microscope Head Mounting: Attach the binocular viewing head to the end of the boom arm. Ensure it is securely fastened.
- Eyepiece Installation: Gently insert the WF10x and WF20x eyepieces into the eyepiece tubes of the binocular head. Ensure they are fully seated.
- LED Light Attachment: Mount the flexible gooseneck LED light onto the boom arm or pillar, ensuring it can be positioned to illuminate the specimen area. Connect the power cable to the light and then to a suitable power outlet.
Figura 2: Ġenb view illustrating the boom arm and pillar assembly, crucial for stable microscope positioning.
Figura 3: Close-up view of the binocular head with eyepieces installed, showing the 1X objective.
4. Istruzzjonijiet Operattivi
4.1 Powering On and Lighting
Connect the microscope's power cord to a 110V-120V AC outlet. Locate the power switch for the LED light, typically on the base or near the light source, and turn it on. Adjust the flexible gooseneck to direct the light onto your specimen for optimal illumination.
4.2 Placing a Specimen
Place the specimen directly under the objective lens on the working stage. Ensure it is stable and within the working distance of the microscope.
4.3 Aġġustament tal-Ingrandiment
The microscope comes with interchangeable WF10x and WF20x eyepieces. The 1X objective provides a fixed magnification. To change the overall magnification, swap the eyepieces as needed. The WF10x eyepieces combined with the 1X objective provide 10X magnification, and the WF20x eyepieces provide 20X magnification.
4.4 Iffukar
Use the bilateral focus knobs located on the boom arm to bring the specimen into sharp focus. Rotate the knobs slowly until the image appears clear. The long working distance allows for easy manipulation of the specimen while viewing.
4.5 Interpapillary Distance Adjustment
Adjust the distance between the two eyepiece tubes to match the distance between your eyes. This ensures a comfortable and clear binocular view. Look through both eyepieces and slide them closer or further apart until you see a single, circular field of view.
4.6 Dioptric Adjustment
If one of your eyes has a different strength, use the diopter adjustment ring on one of the eyepiece tubes (usually the left one) to compensate. Focus the microscope using only the non-adjustable eyepiece (right eye), then close your right eye and adjust the diopter ring on the left eyepiece until the image is sharp for your left eye.
5. Manutenzjoni u Kura
- Tindif tal-Lentijiet: Use a soft, lint-free cloth or lens paper specifically designed for optical surfaces. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the lens.
- Tindif tal-Korp: Imsaħ il-korp tal-mikroskopju b'ċarruta ratba u damp drapp. Evita li tuża kimiċi ħarxa jew tindif li joborxu.
- Ħażna: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Moving the Microscope: Always lift the microscope by its base. Avoid lifting it by the head or boom arm.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No illumination from LED light. | Power cord not connected; power switch off; LED bulb failure. | Check power connection and switch. If still no light, contact support for bulb replacement. |
| L-immaġni hija mċajpra jew mhux iffukata. | Incorrect focus adjustment; eyepieces not fully seated; diopter not adjusted. | Adjust focus knobs slowly. Ensure eyepieces are fully inserted. Perform dioptric adjustment. |
| Only one eye sees the image. | Interpapillary distance not set correctly. | Adjust the distance between the eyepieces until a single circular field of view jiġi osservat. |
| Microscope feels unstable or tips easily. | Boom arm extended too far; not on a level surface. | Ensure the microscope is on a stable, level surface. Adjust the boom arm to maintain balance, especially when working with heavy specimens or accessories. |
| Missing components upon arrival. | Żball fl-ippakkjar. | Refer to the "What's in the Box" section and contact customer support immediately. |
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Mikroskopju Stereo binokulari |
| Numru tal-Mudell tal-Oġġett | A22.1201-C1 |
| Brand | OPTO-EDU |
| Ingrandiment (Massimu) | 20X (with WF20x eyepieces) |
| Eyepieces | WF10x18mm and WF20x10mm (interchangeable pairs) |
| Lenti Għan | 1X Achromatic |
| Viewing Kap | Binocular, 30-degree inclination |
| Interpapillary Range | 50 sa 77mm |
| Dawl | 1W LED, flexible gooseneck |
| Tip Stand | Boom-Arm Stand |
| Vertical Working Distance | 9 pulzieri (22.86 ċm) |
| Boom Arm Working Distance | 12 pulzieri (30.48 ċm) |
| Sors tal-Enerġija | Corded Elettriku |
| Voltage | 110V-120V |
| Materjal | Metall, Ħġieġ, Plastik |
| Dimensjonijiet tal-Pakkett | 19 x 14.2 x 8.1 pulzieri (48.26 x 36.07 x 20.57 ċm) |
| Piż tal-oġġett | 14.85 Lira (6.74 kg) |
| Manifattur | Opto-Edu (Beijing) Co., Ltd. |
| Pajjiż ta' Oriġini | Iċ-Ċina |
8. Garanzija u Appoġġ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact OPTO-EDU directly. Protection plans may be available for extended coverage; please consult your retailer for details.
X'hemm fil-Kaxxa:
- Korp tal-mikroskopju
- Eyepieces (WF10x and WF20x pairs)
- Eye guards
- Kopertura tat-trab
- Manwal ta' struzzjonijiet
9. Vidjows Uffiċjali tal-Prodott
Bħalissa ma nstab l-ebda vidjow uffiċjali tal-prodott mill-bejjiegħ għal dan il-mudell.
