Manwal tal-Utent tas-Swiċċ Fortinet FS-108E FortiSwitch-108E L2

1. Introduzzjoni

The Fortinet FS-108E FortiSwitch-108E is a Layer 2 Ethernet switch designed to provide a secure, simple, and scalable networking solution. It is suitable for small to mid-sized businesses, distributed enterprises, and branch offices requiring robust security and efficient network management. This switch integrates seamlessly with the FortiGate Network Security Platform, allowing for centralized management and comprehensive visibility of connected devices and users.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety instructions before operating this device. Failure to do so may result in injury or damage to the product.

• Sors tal-Enerġija: Connect the device only to the type of power source indicated on the marking label. Ensure the power outlet is properly grounded.
• Ventilazzjoni: Do not block any ventilation openings. Ensure adequate airflow around the device to prevent overheating.
• Umdità: Tesponix l-apparat għall-ilma jew għal umdità eċċessiva.
• Pjazzament: Place the device on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.
• Servizzi: Tippruvax isservi dan il-prodott int stess. Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.

3. Kontenut tal-Pakkett

Verify that all items are present and in good condition. If any item is missing or damaged, contact your vendor.

• Fortinet FS-108E FortiSwitch-108E L2 Switch
• Power Adapter/Cable
• Rack-mount kit (RM-FR-D12)
• Gwida ta' Bidu Mgħaġġel (jekk applikabbli)

4. Physical Features and Hardware Overview

4.1 Panel ta 'Quddiem

The front panel of the FortiSwitch-108E features network ports and status indicators.

Figura 1: Quddiem view of the Fortinet FS-108E FortiSwitch-108E. This image displays the eight RJ45 Gigabit Ethernet ports, two SFP Gigabit Ethernet ports, and the Power and Alarm LED indicators. Each RJ45 port also has its own Link/Activity LED.

• LED tal-qawwa: Jindika l-istatus tal-qawwa tal-apparat.
• LED ta' allarm: Jindika allarmi jew żbalji tas-sistema.
• 1-8 GE RJ45 Ports: Eight Gigabit Ethernet ports for connecting network devices.
• 9-10 GE SFP Ports: Two Gigabit Ethernet Small Form-Factor Pluggable ports for fiber optic connections.
• LEDs tal-Link/Act (għal kull port): Indicates network link status and activity for each RJ45 and SFP port.
• PoE PD: Indicates Power over Ethernet Powered Device capability, meaning the switch can be powered by an external PoE source.

4.2 Panel ta 'wara

The rear panel provides connectivity for console management and power input.

Figura 2: Wara view of the Fortinet FS-108E FortiSwitch-108E. This image shows the console port for direct management access and the standard AC power input connector.

• Port tal-Console: RJ45 port for local management access via a serial connection.
• Input ta' Enerġija: Standard AC power connector (100-240V AC, 50/60Hz).

5. Setup

5.1 Tqegħid tal-Apparat

The FortiSwitch-108E is a fanless device, suitable for quiet environments. It can be placed on a desktop or mounted in a rack using the included rack-mount kit.

• Ensure adequate space for ventilation around the device.
• Avoid placing the switch in direct sunlight or near strong electromagnetic fields.

5.2 Konnessjoni tal-Enerġija

The FortiSwitch-108E supports dual power options: standard AC power and Power over Ethernet Powered Device (PoE PD).

• Qawwa AC: Connect the provided power cable to the AC power input on the rear panel and then to a grounded electrical outlet.
• PoE PD: The switch can also be powered by a compatible PoE source connected to one of its RJ45 ports (typically port 8, as indicated by 'PoE PD' label). This allows for flexible deployment where AC power might not be readily available.

5.3 Konnessjonijiet tan-Netwerk

• Portijiet RJ45: Connect Ethernet cables from your network devices (computers, servers, access points) to the RJ45 ports (1-8).
• Portijiet SFP: Insert compatible SFP transceivers into the SFP ports (9-10) and connect fiber optic cables for longer distance or higher bandwidth uplinks.

5.4 Konfigurazzjoni Inizjali

The FortiSwitch-108E is designed for integration with a FortiGate Network Security Platform. Management is typically performed through the FortiGate interface.

• Connect the FortiSwitch to a FortiGate device.
• Access the FortiGate interface to discover and authorize the FortiSwitch.
• Configure VLANs, port settings, and security policies as required through the FortiGate controller.
• For direct console access, connect a serial cable from your management workstation to the console port on the switch and use a terminal emulator (e.g., PuTTY) with appropriate serial settings (e.g., 9600 baud, 8 data bits, no parity, 1 stop bit).

6. Istruzzjonijiet Operattivi

6.1 Indikaturi LED

Monitor the LEDs on the front panel to understand the switch's status:

• LED tal-qawwa:
  • Aħdar Solidu: L-apparat huwa mixgħul u qed jaħdem normalment.
  • Off: Device is powered off or not receiving power.
• LED ta' allarm:
  • Solid Red/Amber: Indicates a system error or alarm condition. Refer to the FortiGate interface or console for details.
  • Off: No active alarms.
• LEDs tal-Link/Act (għal kull port):
  • Solid Green/Amber: A network link is established.
  • Flashing Green/Amber: Data activity is occurring on the port.
  • Mitfi: Ma nstab l-ebda konnessjoni man-netwerk.

6.2 FortiGate Switch Controller Management

Once integrated with a FortiGate, the FortiSwitch can be managed centrally. This includes:

• Creating and assigning VLANs to switch ports.
• Monitoring port status and traffic statistics.
• Applying security policies and access controls.
• Twettiq ta' aġġornamenti tal-firmware.

7. Manutenzjoni

7.1 Tindif

• Ensure the device is powered off and disconnected from all power sources before cleaning.
• Uża drapp artab u niexef biex timsaħ il-parti ta' barra tas-swiċċ.
• Tużax prodotti tat-tindif likwidi jew aerosols, għax jistgħu jagħmlu ħsara lill-apparat.

7.2 Aġġornamenti tal-Firmware

Regularly check for and apply firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically managed through the connected FortiGate controller.

8 Issolvi l-problemi

If you encounter issues with your FortiSwitch, refer to the following common troubleshooting steps:

• Ebda Qawwa:
  • Check if the power cable is securely connected to both the switch and the power outlet.
  • Ivverifika li l-iżbokk tad-dawl huwa funzjonali.
  • If using PoE PD, ensure the PoE source is active and providing sufficient power.
• L-ebda Link fuq il-Port:
  • Ensure the Ethernet or fiber cable is securely connected at both ends.
  • Ivverifika li l-apparat konness ikun mixgħul u jaħdem sew.
  • Ipprova kejbil jew port differenti.
• FortiSwitch Not Visible in FortiGate:
  • Ensure the FortiSwitch is powered on and connected to the FortiGate.
  • Check network connectivity between the FortiSwitch and FortiGate.
  • Refer to the FortiGate documentation for FortiSwitch discovery and authorization procedures.
• Alarm LED is On:
  • Access the FortiGate interface or connect via the console port to view detailed alarm messages.
  • Consult Fortinet support resources for specific alarm codes.

If issues persist, contact Fortinet technical support.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

For warranty information, technical support, and additional resources, please visit the official Fortinet website or contact your authorized Fortinet reseller. Fortinet products often require maintenance contracts for ongoing support and updates beyond an initial period.

Appoġġ Fortinet Websit: https://www.fortinet.com/support