Force1 Velocity RC Boat Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your Force1 Velocity RC Boat, Model 1012BL. Please read this manual thoroughly before operating the boat to ensure proper function and longevity of the product.

Image: The Force1 Velocity RC Boat, its remote control, and two rechargeable batteries displayed on a stand.

Informazzjoni dwar is-Sigurtà

• Mhux adattat għal tfal taħt l-14-il sena mingħajr sorveljanza ta' adulti.
• Operate only in freshwater environments such as pools or lakes with low surface debris. Not for use in saltwater.
• Ensure the waterproof seal is properly secured before placing the boat in water.
• Always maintain a safe distance from swimmers, animals, and other watercraft.
• Tmissx il-mutur immedjatament wara l-użu, għax jista' jkun jaħraq.
• If the boat becomes submerged or takes on water, retrieve it immediately and allow it to dry completely before further use.
• Use only the provided charger and batteries. Do not attempt to charge damaged batteries.

Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

• 1x Force1 Velocity RC Boat
• 1x 2.4 GHz Transmitter (Remote Control)
• 2x 3.7V 800mAh Li-Ion Rechargeable Batteries
• 1x Ċarġer tal-USB
• 1x Spanner
• 1x Boat Stand
• 1x Ġewż
• 1x Extra Propeller
• 1x Waterproof Ring
• 1x Manwal tal-Istruzzjonijiet (dan id-dokument)

Image: A visual representation of all included components: the RC boat, remote control, two batteries, USB charger, spanner, boat stand, extra propeller, and waterproof ring.

Setup

1. Charging the Boat Batteries

1. Connect the provided USB charger to a USB power source (e.g., computer, USB wall adapter).
2. Connect one of the 3.7V 800mAh Li-Ion batteries to the USB charger.
3. The charging indicator light on the USB charger will illuminate during charging.
4. Charging typically takes approximately 120 minutes for a full charge. The indicator light will change or turn off when charging is complete.
5. Irrepeti għat-tieni batterija.

Image: Two 3.7V 800mAh Li-Ion batteries and the USB charging cable.

2. Installazzjoni tal-Batteriji fil-Kontroll mill-Bogħod

1. Locate the battery compartment on the back of the 2.4 GHz transmitter.
2. Iftaħ l-għatu tal-kompartiment tal-batterija.
3. Insert 3x AA size batteries (not included), ensuring correct polarity (+/-).
4. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

3. Installazzjoni tal-Batterija tad-Dgħajsa

1. Carefully open the boat's top hatch.
2. Connect a fully charged 3.7V 800mAh Li-Ion battery to the boat's power connector.
3. Poġġi l-batterija sew fil-kompartiment.
4. Ensure the waterproof ring is correctly seated around the hatch opening.
5. Close the top hatch firmly to create a watertight seal.

Immaġni: Sploda view of the Force1 Velocity RC Boat, highlighting the waterproof seal, high-powered Li-Ion battery, durable hull, steering rudder, and LEDs.

4. Tqabbil Inizjali

1. Place the boat in water. The boat's power system activates only when in contact with water.
2. Turn on the remote control using the power switch.
3. The remote control and boat should automatically pair. The LED on the remote will indicate a successful connection.

Istruzzjonijiet Operattivi

Funzjonijiet ta 'Kontroll mill-bogħod

Image: The 2.4 GHz remote control, detailing its antenna, diving button, capsize recovery button, power switch, low battery alarm, trim adjustment, and left-right direction control.

• Trigger tat-throttle: Pull to move forward, push to reverse.
• Stering: Turn left or right to steer the boat.
• Diving Button: Press to initiate an underwater dive. The boat will briefly submerge.
• Capsize Recovery Button: If the boat flips over, press this button to automatically right the boat.
• Aġġustament tat-Trim: Use to fine-tune steering if the boat pulls to one side.
• Allarm tal-Batterija Baxxa: The remote will alert you when the boat's battery is low, indicating it's time to return the boat to shore.
• Low Signal Warning: The remote will alert you if the boat is approaching the edge of its 100-meter (328 feet) operating range.

Operazzjoni Ġenerali

1. Always operate the boat in open water, away from obstacles and marine life.
2. Begin with slow movements to familiarize yourself with the controls.
3. Monitor the low battery and low signal warnings to prevent loss of control or power.
4. For optimal performance, ensure the water is calm and free of heavy currents or waves.

Image: The Force1 Velocity RC Boat in motion on the water, demonstrating its speed.

Image: The Force1 Velocity RC Boat partially submerged in water, illustrating its diving capability.

Manutenzjoni

• Wara Kull Użu:
  • Remove the boat battery and allow all components to dry thoroughly.
  • Wipe down the boat exterior with a soft, dry cloth.
  • Inspect the propeller for any debris (e.g., weeds, fishing line) and remove carefully.
  • Ensure the waterproof seal is clean and free of damage.
• Propeller Shaft Lubrication: Periodically apply a small amount of marine-grade grease to the propeller shaft to ensure smooth operation and prevent wear.
• Ħażna: Store the boat and remote control in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods.

Issolvi l-problemi

Speċifikazzjonijiet

Appoġġ għall-Klijent

For further assistance, technical support, or inquiries regarding replacement parts, please contact Force1 customer service. Visit the official Force1 websit għal informazzjoni ta' kuntatt.

Websit: Force1 Official Store