Amazon Basics Mid-Back Office Computer Task Desk Chair (Model GF-9390M-1) Instruction Manual

Introduzzjoni

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Informazzjoni dwar is-Sigurtà

TWISSIJA:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• Teċċedix il-kapaċità massima tal-piż ta' 275 libbra (124.74 kg).
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti qabel tibda l-assemblaġġ:

• Kuxxin tas-Sedil
• Kuxxin tad-dahar
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• Base (5-point star base)
• Armrests (2)
• Xandara (5)
• Mechanism (for seat height and tilt)

Setup u Assemblea

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. Insert Cylinder: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. Waħħal il-Mekkaniżmu mas-Sedil: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. Waħħal Armrests: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. Waħħal id-Dahar: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. Issikka l-Viti Kollha: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

Istruzzjonijiet Operattivi

Is-siġġu tal-uffiċċju Amazon Basics tiegħek joffri diversi karatteristiċi aġġustabbli għal kumdità personalizzata:

• Aġġustament tal-Għoli tas-Sedil: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• Funzjoni Mejjel: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• Aġġustament tat-Tensjoni tal-Inklinazzjoni: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Dawwar 360 Grad: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Rolling Casters: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

Manutenzjoni

To maintain the appearance and longevity of your chair:

• Tindif: Imsaħ nadif bl adamp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu li jistgħu jagħmlu ħsara lill-ġilda artifiċjali.
• Qafliet: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• Xandara: Żomm ir-roti ħielsa minn debris (xagħar, trab, eċċ.) biex tiżgura li jirrumblaw bla xkiel.

Issolvi l-problemi

If you encounter issues with your chair, consider the following:

• Chair feels unstable or wobbly: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• Ir-roti ma jdurux bla xkiel: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.