Introduzzjoni
Welcome to the user manual for your new ThruNite TC12 V2 EDC Flashlight. This powerful and versatile LED flashlight is designed for everyday carry, offering exceptional brightness, reliable performance, and convenient USB-C recharging. Please read this manual carefully to ensure proper use, maintenance, and to maximize the lifespan of your device.
Image: The ThruNite TC12 V2 flashlight shown alongside its rechargeable 18650 battery.
Kontenut tal-Pakkett
Upon opening your ThruNite TC12 V2 package, you should find the following items:
- 1 x ThruNite TC12 V2 Cool White Flashlight
- 1 x ThruNite 18650 Rechargeable Battery (3400mAh)
- 1 x Cable tal-Iċċarġjar USB-C
- 1 x Lanyard
- 1 x Holster
- 1 x Pocket Clip (pre-installed or separate)
- O-rings żejda
- Għatu tal-Port USB żejjed
Image: All items included in the ThruNite TC12 V2 flashlight package, laid out for inspection.
Setup
Installazzjoni tal-batterija
- Ħoll l-għatu tad-denb tat-torċa billi ddawwru kontra l-arloġġ.
- Insert the included ThruNite 18650 battery with the positive (+) end facing towards the head of the flashlight (towards the LED).
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened for proper electrical contact and water resistance.
Iċċarġjar
The TC12 V2 features a built-in USB-C charging port for convenient recharging of the included 18650 battery.
- Locate the USB-C charging port on the side of the flashlight, usually covered by a rubber flap.
- Gently lift the rubber flap to expose the port.
- Connect the included USB-C cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- Id-dawl indikatur fuq is-swiċċ tal-ġenb juri l-istatus tal-iċċarġjar:
- Blu: Charging complete.
- Aħmar: Iċċarġjar għaddej.
- Once charging is complete, disconnect the USB-C cable and firmly press the rubber flap back into place to ensure water resistance.
Immaġni: Close-up view of the ThruNite TC12 V2 flashlight, highlighting the USB-C charging port located on the side.
Operazzjoni
The TC12 V2 features both a tail switch and a side switch for versatile operation.
Tail Switch Operations
- Momentarju Fuq: Lightly press the tail switch for momentary illumination. Release to turn off.
- Mixgħul/Mitfi Kostanti: Agħfas is-swiċċ ta’ wara għalkollox sakemm tikklikkja biex tixgħel jew titfi l-flashlight.
- Turbo Instant: From off, fully press and hold the tail switch to activate Turbo mode instantly. Release to turn off.
Image: The tail cap of the ThruNite TC12 V2 flashlight, where the primary power switch is located.
Side Switch Operations (when flashlight is ON via tail switch)
- Ibdel il-Modi: From ON, press and hold the side switch to cycle through Firefly, Low, Medium, and High modes. Release the switch to select the desired mode. The flashlight has mode memory and will turn on in the last used general mode (excluding Turbo and Strobe).
- Turbo Instant: Double-click the side switch quickly to activate Turbo mode. Double-click again to return to the previous mode.
- Modalità Strobe: Triple-click the side switch quickly to activate Strobe mode. Double-click to return to the previous mode.
- Firefly Mode: From OFF, press and hold the side switch for 1 second to activate Firefly mode.
Image: The ThruNite TC12 V2 flashlight, highlighting the side switch with its integrated indicator light.
Manutenzjoni
- Tindif: Regularly clean the threads and O-rings with a clean cloth. Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance.
- Kura tal-batterija: Store the battery in a cool, dry place when not in use. If the flashlight will not be used for an extended period, remove the battery to prevent parasitic drain and potential damage.
- Port USB: Ensure the rubber cover for the USB-C charging port is always securely closed when not charging to prevent dust and water ingress.
- Tindif tal-Lenti: Use a soft, lint-free cloth to clean the lens. Avoid abrasive materials that could scratch the surface.
Issolvi l-problemi
If you encounter issues with your ThruNite TC12 V2, please refer to the table below for common problems and their solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-flashlight ma tixgħel. | Battery is dead or improperly installed. Tail cap is loose. | Charge the battery. Ensure battery is inserted with positive (+) end towards the head. Tighten the tail cap fully. |
| Id-dawl huwa baxx jew jitteptep. | Low battery. Poor contact between battery and contacts. | Recharge the battery. Clean battery contacts and flashlight contacts. Ensure tail cap is tight. |
| L-indikatur tal-iċċarġjar mhux qed jaħdem. | USB cable or power source issue. Charging port cover not fully open. | Try a different USB cable or power source. Ensure the rubber cover is fully open and the cable is inserted correctly. |
| Il-flashlight tisħon malajr. | Operating in Turbo mode for extended periods. | This is normal for high-output flashlights. Reduce output to a lower mode if it becomes too hot to handle. The flashlight has thermal regulation to prevent overheating. |
Speċifikazzjonijiet
Detailed technical specifications for the ThruNite TC12 V2 CW Flashlight:
| Karatteristika | Dettall |
|---|---|
| Mudell | TC12 V2 CW |
| Brand | ThruNite |
| Tip ta' Sors tad-Dawl | LED |
| Max Output Brightness | 1100 Lumens |
| Distanza Massima tar-Raġġ | 240 Meters |
| Sors tal-Enerġija | Battery Powered (1x 18650 rechargeable battery included) |
| Iċċarġjar | USB-C Rechargeable |
| Materjal | Aluminum (Type III hard-anodized finish) |
| Livell ta 'Reżistenza għall-Ilma | IPX-8 (sommerġibbli 2 metri) |
| Reżistenza għall-Impatt | 1 Meter |
| Dimensjonijiet tal-Prodott | 1"D x 1"W x 5.51"Għ (madwar 25.4mm x 25.4mm x 140mm) |
| Kulur | Black (TC12 V2 CW) |
Immaġni: Dettaljata view of the LED emitter and reflector assembly within the ThruNite TC12 V2 flashlight head.
Garanzija u Appoġġ
ThruNite products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the warranty card included in your product packaging or visit the official ThruNite website. You may also contact ThruNite customer service directly for assistance with product operation, troubleshooting, or warranty claims.
For the most up-to-date information and contact methods, please visit: www.thrunite.com
