Introduzzjoni
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Essential III Beatles Turntable. Please read this manual carefully before using the product to ensure proper function and longevity.
Kontenut tal-Pakkett
Before beginning, please verify that all items listed below are present in your package:
- Ortofon OM10 Phono Cartridge
- 15 V DC Universal Power Supply
- Hinged Acrylic Dust Cover
- Connect It E Audio Cable
- 7" 45 RPM Adaptor
Image: The Pro-Ject Essential III Beatles Turntable, showcasing its unique design and components.
Setup
Follow these steps to set up your turntable for optimal performance:
- Spakkjar: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Żomm l-imballaġġ għal trasport jew ħażna fil-futur.
- Pjazzament: Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation.
- Installazzjoni tal-Platter: Gently place the acrylic platter onto the spindle. Ensure it sits flush.
- Installazzjoni taċ-ċinturin: Carefully loop the silicone drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
- Cartridge Alignment (Pre-mounted): The Ortofon OM10 cartridge comes pre-mounted. Verify it is securely attached to the tonearm.
- Tonearm Balance: Adjust the counterweight at the rear of the tonearm until the tonearm floats freely and horizontally. Then, set the tracking force according to the cartridge manufacturer's specifications (typically 1.5g for Ortofon OM10).
- Anti-skating Adjustment: Attach the anti-skating weight to the designated groove on the tonearm support.
- Qoxra tat-Trab: Attach the hinged acrylic dust cover to the rear hinges of the turntable.
- Konnessjonijiet: Connect the Connect It E Audio Cable from the turntable's RCA outputs to your phono preamplifier jew amplifier's phono input. Connect the 15V DC universal power supply to the turntable and then to a power outlet.
Image: Detail of the motor pulley and belt drive system.
Image: The tonearm and pre-mounted Ortofon OM10 cartridge.
Istruzzjonijiet Operattivi
To play a record:
- Qawwa Mixgħul: Flip the power switch located on the side of the plinth to the 'On' position. The platter will begin to spin.
- Agħżel Veloċità: The turntable supports 33 1/3 RPM and 45 RPM. To change speed, manually move the drive belt to the appropriate step on the motor pulley. Use the 7" 45 RPM adaptor for singles.
- Rekord tal-Post: Poġġi r-rekord tal-vinil tiegħek bir-reqqa fuq il-platter.
- Driegħ tat-Tonearm tal-Irfigħ: Uża l-lieva tal-lift tat-tonearm biex tgħolli t-tonearm.
- Pożizzjoni tal-Istilus: Mexxi bil-mod id-driegħ tat-tone fuq il-kanal tal-bidu mixtieq tar-rekord.
- Driegħ t'isfel: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
- Tmiem tal-Daqq: At the end of the record, use the tonearm lift lever to raise the tonearm, then return it to its rest. Flip the power switch to 'Off'.
Image: Power switch location on the turntable plinth.
Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tat-turntable tiegħek:
- Qoxra tat-Trab: Always use the dust cover when the turntable is not in use to protect it from dust and debris.
- Cleaning the Plinth: Wipe the plinth with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Tindif tal-Istilus: Use a dedicated stylus brush or cleaning fluid to gently clean the stylus before or after each play. Brush from back to front.
- Rekords tat-Tindif: Keep your records clean using a record brush or a record cleaning machine to prevent dust from accumulating on the stylus.
- Spezzjoni taċ-ċinturin: Periodically inspect the drive belt for wear or stretching. Replace if necessary.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi bit-turntable tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No power / Turntable not spinning | Power cable disconnected; Power outlet faulty; Power switch off. | Check power connections; Try a different outlet; Ensure power switch is 'On'. |
| L-ebda ħoss jew ħoss baxx ħafna | Input mhux korrett magħżul fuq amplifier; Cartridge not connected properly; Amplifier volume too low; No phono preampaktar ħaj. | Select correct input (Phono); Check cartridge wiring; Increase volume; Ensure a phono preamplifier is used if your amplifier lacks one. |
| Distorted sound / Skipping | Stylus dirty or worn; Tracking force incorrect; Anti-skating incorrect; Record dirty or damaged. | Clean stylus; Re-adjust tracking force and anti-skating; Clean or replace record. |
| Ħoss ta’ twerwir | Ground wire not connected; Interference from other electronics. | Ensure ground wire is connected to amplifier's ground terminal; Move turntable away from other electronics. |
| Speed inconsistency | Drive belt worn or improperly seated; Motor issue. | Check and re-seat drive belt; Replace belt if worn. If problem persists, contact support. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Essential III Sgt. Pepper |
| Brand | Pro-Ġett |
| Dimensjonijiet (L x W x H) | 12.99 x 16.54 x 4.41 pulzieri |
| Piż tal-oġġett | 11 liri (madwar 5 kg) |
| Teknoloġija tal-Konnettività | RCA |
| Materjal | Injam Inġinerizzat, Plastik |
| Sistema tas-sewqan | Ċinturin b'mutur sinkroniku u ċinturin tas-silikon |
| Platter | Acrylic (Acryl it E upgrade) |
| Id-driegħ | 8.6" Aluminium Tonearm |
| Skartoċċ | Pre-mounted Ortofon OM10 |
| Konsum tal-Enerġija bil-modalità Mixgħul | 4.5 watt |
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għas-sit uffiċjali ta' Pro-Ject Audio Systems. webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Manifattur: Sistemi tal-Awdjo Pro-Ject
L-Ewwel Disponibbli: 31 ta’ Mejju, 2017
Politika ta' Ritorn: 30-day refund/replacement (as per Amazon's policy at time of data retrieval).
Għal aktar għajnuna, żur il- Ħanut Pro-Ject fuq Amazon.
