KLH Bassbite-II Powered Subwoofer

1. Introduzzjoni u Fuqview

Thank you for choosing the KLH Bassbite-II Powered Subwoofer. This unit is designed to enhance the low-frequency response of your existing audio system, providing deep, rich bass for an immersive listening experience. This manual provides essential information for the safe and effective operation of your subwoofer.

Figura 1.1: Quddiem view of the KLH Bassbite-II Powered Subwoofer with grille.

This image shows the front of the KLH Bassbite-II subwoofer, featuring its dark gray cabinet and a removable front grille that covers the speaker driver. The KLH logo is visible at the bottom of the grille.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

Please read and follow all safety instructions before operating the subwoofer to prevent electric shock, fire, or injury.

• Aqra l-Istruzzjonijiet: Aqra l-istruzzjonijiet kollha dwar is-sigurtà u l-operat qabel ma tħaddem l-apparat.
• Żomm Istruzzjonijiet: Żomm l-istruzzjonijiet tas-sigurtà u tat-tħaddim għal referenza futura.
• Oqgħod attent it-Twissijiet: Żomm mat-twissijiet kollha fuq l-apparat u fl-istruzzjonijiet tat-tħaddim.
• Segwi l-Istruzzjonijiet: Segwi l-istruzzjonijiet kollha tat-tħaddim u l-użu.
• Ilma u Umdità: Tużax dan l-apparat ħdejn l-ilma.
• Tindif: Naddaf biss b'ċarruta niexfa.
• Ventilazzjoni: Timblokkax il-fetħiet tal-ventilazzjoni. Installa skont l-istruzzjonijiet tal-manifattur.
• Sħana: Tinstallax ħdejn xi sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Protezzjoni tal-Kard tal-Enerġija: Ipproteġi l-korda tad-dawl milli timxi fuqha jew maqrusa, partikolarment fil-plakek, ir-reċipjenti tal-konvenjenza, u l-punt fejn joħorġu mill-apparat.
• Sajjetti: Aqla’ dan l-apparat waqt maltempati tas-sajjetti jew meta ma jintużax għal perjodi twal ta’ żmien.
• Servizzi: Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat. Is-servizz huwa meħtieġ meta l-apparat ikun ġie bil-ħsara b'xi mod, bħal korda tal-provvista tal-enerġija jew plagg ikun bil-ħsara, likwidu jkun inxtered jew oġġetti jkunu waqgħu fl-apparat, l-apparat ikun ġie espost għax-xita jew umdità, ma jaħdimx b'mod normali , jew twaqqgħet.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• KLH Bassbite-II Powered Subwoofer
• Kejbil tal-Enerġija (imwaħħal)

Jekk xi oġġetti huma nieqsa jew bil-ħsara, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek.

4. Setup

4.1 Tqegħid

The placement of your subwoofer can significantly affect its sound performance. Experiment with different locations to find the best bass response for your room.

• Pjazzament tar-Rokna: Placing the subwoofer in a corner of the room can often maximize its output and provide the most impactful bass.
• Kelliema ta' Quddiem Qrib: Placing the subwoofer near your main front speakers can help create a more seamless soundstage.
• Evita l-Ostruzzjonijiet: Ensure the subwoofer is not placed in an enclosed cabinet or directly against a wall that might block its port (if applicable) or restrict airflow.

4.2. Konnessjonijiet

The KLH Bassbite-II subwoofer offers multiple connection options to integrate with your audio system. Ensure all components are turned off before making any connections.

Figure 4.1: Rear panel of the KLH Bassbite-II Subwoofer.

This image displays the rear panel of the subwoofer, featuring the speaker level inputs/outputs ("FROM AMPLIFIER", "TO SPEAKERS"), RCA low-level inputs, a power switch, and a volume control knob. The attached power cord is also visible.

Figure 4.2: Close-up of the connection panel.

A dettaljata view of the connection panel, highlighting the speaker wire terminals (red and black clips) for "FROM AMPLIFIER" and "TO SPEAKERS", and the RCA jacks for "LOW LEVEL" input. The "POWER" switch and "VOLUME" knob are also clearly visible.

Option 1: Low-Level (RCA) Connection (Recommended for Receivers with Subwoofer Output)

1. Connect an RCA cable from the "SUBWOOFER OUT" or "LFE OUT" jack on your receiver/amplifier to the "LOW LEVEL" (L or R) input on the Bassbite-II subwoofer. If your receiver has a single LFE output, connect it to either the L or R input on the subwoofer.
2. Ensure the subwoofer's power switch is in the OFF position.
3. Plug the subwoofer's power cord into a standard 120 VAC, 60 Hz electrical outlet.

Option 2: Speaker Level Connection (For Amplifiers mingħajr Output tas-Subwoofer)

1. Connect speaker wires from the "SPEAKER OUT" terminals of your amplifier/receiver to the "FROM AMPLIFIER" speaker level inputs on the Bassbite-II subwoofer. Ensure correct polarity (+ to + and - to -).
2. Connect speaker wires from the "TO SPEAKERS" outputs on the Bassbite-II subwoofer to your main left and right speakers. Again, ensure correct polarity.
3. Ensure the subwoofer's power switch is in the OFF position.
4. Plug the subwoofer's power cord into a standard 120 VAC, 60 Hz electrical outlet.

5. Istruzzjonijiet Operattivi

5.1. Tixgħil / Mitfi

• To turn on the subwoofer, flip the "POWER" switch located on the rear panel to the ON position.
• To turn off the subwoofer, flip the "POWER" switch to the OFF position.

5.2. Volum ta 'aġġustament

The "VOLUME" knob on the rear panel controls the output level of the subwoofer.

• Dawwar il-pum lejn l-arloġġ biex iżżid il-volum.
• Dawwar il-pum kontra l-arloġġ biex tnaqqas il-volum.
• Start with the volume at a low setting and gradually increase it until the bass blends seamlessly with your main speakers without overpowering them.

6. Manutenzjoni

Proper care will ensure the longevity and performance of your KLH Bassbite-II Subwoofer.

• Tindif: Use a soft, dry cloth to clean the cabinet. Do not use abrasive cleaners, waxes, or solvents, as they may damage the finish.
• Trab: Regularly dust the subwoofer to prevent accumulation, especially around the rear panel connections and ventilation areas.
• Ambjent: Evita li tesponi s-subwoofer għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.

Figure 6.1: Subwoofer with grille removed.

This image shows the KLH Bassbite-II subwoofer with its front grille detached, revealing the bass reflex port located at the bottom of the front baffle. This port helps enhance the low-frequency output.

7 Issolvi l-problemi

Jekk tesperjenza problemi bis-subwoofer tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For specific warranty information, please refer to the documentation provided by your retailer at the time of purchase. Manufacturer warranty details are typically included with new products.

If you require technical support or have questions regarding your KLH Bassbite-II Subwoofer, please contact your original retailer or visit the official KLH Audio Systems websit għal riżorsi ta' appoġġ.

Note: The product description mentions a "Two weeks Return/Refund Guarantee" which refers to a seller's return policy and not a manufacturer's warranty.