Introduzzjoni
Dan il-manwal jipprovdi informazzjoni essenzjali għall-installazzjoni, it-tħaddim u l-manutenzjoni sikuri u effiċjenti tal-Xpelair Simply Silent Contour C6S Square 150mm Extractor Fan tiegħek. Jekk jogħġbok aqra dawn l-istruzzjonijiet bir-reqqa qabel l-installazzjoni u żommhom għal referenza futura.
Immaġni: Quddiem view of the Xpelair Simply Silent Contour C6S Square 150mm Extractor Fan, showing its white, square design with rounded corners and the Xpelair logo in the bottom right.
Prodott Overview
The Xpelair Simply Silent Contour C6S is a two-speed 150mm extractor fan designed for wall, ceiling, and panel mounting. It features a square design and is equipped with a timer function (C6TS model). This fan is engineered to provide efficient ventilation while aiming for quiet operation, suitable for various domestic applications, particularly bathrooms.
- Mudell: C6S (Contour Square)
- Tip: 150mm Extractor Fan
- Karatteristiċi: Two-speed operation, Timer function (C6TS variant), IPX4 rated.
- Konformità: Part F, L and ErP compliant.
Informazzjoni dwar is-Sigurtà
Always disconnect the power supply before installation, maintenance, or servicing. Installation should only be carried out by a qualified electrician in accordance with current wiring regulations. Do not operate the fan if any part is damaged. Ensure proper earthing.
- Kun żgur li l-provvista tal-enerġija taqbel mal-volum tal-fanntage (220-240V).
- Twaqqafx il-fluss tal-arja.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod mill-fann waqt it-tħaddim.
Setup u Installazzjoni
This section outlines the general steps for installing the Xpelair Simply Silent Contour C6S fan. For detailed wiring diagrams and specific mounting instructions, refer to the separate installation guide provided with the product packaging.
- Preparazzjoni:
- Ensure the power supply is switched off at the mains.
- Select a suitable mounting location (wall, ceiling, or panel) that allows for adequate airflow and access for maintenance.
- Prepare the opening for the fan ducting (150mm diameter).
- Immuntar:
- Secure the fan body to the chosen surface using appropriate fixings. Ensure it is level and stable.
- Connect the ducting to the fan's spigot, ensuring a tight seal to prevent air leakage.
- Konnessjoni Elettrika:
- Connect the electrical wiring according to the wiring diagram provided in the full installation manual. This typically involves Live, Neutral, and Switched Live connections for the timer function.
- Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati.
- Ibdel il-qoxra tat-terminal.
- Assemblea Finali:
- Attach the front cover of the fan.
- Restore power supply and test the fan's operation.
Istruzzjonijiet Operattivi
The Xpelair Simply Silent Contour C6S (C6TS timer model) operates based on the electrical connection and its integrated timer.
- Operazzjoni Bażika: The fan will activate when the connected light switch (or other switched live source) is turned on.
- Timer Function (C6TS): After the light switch is turned off, the fan will continue to run for a pre-set period. This overrun timer is typically adjustable during installation. Refer to the installation guide for instructions on adjusting the timer setting.
- Għażla tal-Veloċità: The fan may have internal jumpers or switches to select between two speeds (e.g., 216m³/h and 248m³/h). This setting is usually configured during installation.
Manutenzjoni
Regular cleaning and maintenance will ensure the longevity and optimal performance of your extractor fan.
- Skonnettja l-Enerġija: Always switch off the electricity supply to the fan at the mains before performing any cleaning or maintenance.
- Barra Nadif: Wipe the exterior surface of the fan with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Clean Interior (if accessible): If safe and accessible, carefully remove the front cover and gently clean any dust or debris from the fan blades and internal surfaces using a soft brush or vacuum cleaner. Do not use water directly on electrical components.
- Erġa' arma: Ensure all parts are dry before reassembling the fan cover.
- Irrestawra l-Enerġija: Once reassembled, restore the power supply.
Frekwenza: It is recommended to clean the fan every 3-6 months, depending on usage and environmental conditions.
Issolvi l-problemi
If you experience issues with your Xpelair Simply Silent Contour C6S fan, consult the table below. For problems not listed or if solutions do not resolve the issue, contact qualified personnel.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-fann ma jaħdimx. | No power supply; Loose wiring; Faulty switch; Motor failure. | Check mains power and circuit breaker. Verify wiring connections (consult electrician). Test switch. If motor failure, professional repair or replacement may be needed. |
| Il-fann jagħmel storbju eċċessiv. | Loose mounting; Obstruction in fan blades/ducting; Motor bearing wear; Backdraft flap noise. | Ensure fan is securely mounted. Check for and remove any obstructions. If motor noise persists, professional inspection is advised. For backdraft flap noise, ensure it moves freely and consider adding soft material to contact points if applicable. |
| Prestazzjoni fqira tal-estrazzjoni. | Blocked ducting; Dirty fan blades; Incorrect fan speed setting. | Check ducting for blockages. Clean fan blades. Verify fan speed setting (if adjustable). |
| Il-funzjoni tat-tajmer mhux qed taħdem sew. | Incorrect timer setting; Wiring issue with switched live. | Adjust timer setting as per installation manual. Verify switched live connection (consult electrician). |
Speċifikazzjonijiet
Key technical specifications for the Xpelair Simply Silent Contour C6S Extractor Fan:
- Numru tal-Mudell: C6S
- Voltage: 220-240V
- Wattage: 12.9W (low speed) / 28.4W (high speed)
- Kapaċità tal-fluss tal-arja: 216 m³/h (60 L/s) / 248 m³/h (69 L/s)
- Livell tal-ħoss: 42.3 dBA (low speed) / 44.6 dBA (high speed) at 3m
- SFP (Specific Fan Power): 0.22 W/L/s (low speed) / 0.41 W/L/s (high speed)
- Klassifikazzjoni tal-IP: IPX4
- Dimensjonijiet: Madwar 25.4 x 25 x 17.9 ċm (Dimensjonijiet tal-Pakkett)
- Piż: 1.37 kg
- Kulur: Abjad
- Ċertifikazzjoni: ErP compliant
Informazzjoni dwar Garanzija
Xpelair products are manufactured to high standards and are covered by a manufacturer's warranty against defects in materials or workmanship. The specific terms and duration of the warranty may vary. Please refer to the warranty card included with your product or visit the official Xpelair websit għal informazzjoni dettaljata dwar il-garanzija u l-proċeduri ta' reġistrazzjoni.
Appoġġ u Kuntatt
For technical assistance, spare parts, or further inquiries regarding your Xpelair Simply Silent Contour C6S fan, please contact Xpelair customer support.
- Manifattur: Xpelair
- Websit: Visit the Xpelair Store on Amazon (għal informazzjoni ġenerali dwar il-prodott)
- For direct support, please refer to the contact details provided in your product packaging or on the official Xpelair corporate websit.
