Manwal tal-Utent tad-Detentur tat-Tazza tar-Recliner Emomo HX43HRL-1

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Emomo Recliner Cup Holder, Model HX43HRL-1. This cup holder is designed to integrate into recliners and sofas, offering convenient beverage storage with integrated blue LED lighting and touch sensor controls for your recliner's lift mechanism.

Informazzjoni dwar is-Sigurtà

Ensure all power connections are secure and correctly installed to prevent electrical hazards.
Do not expose the cup holder to excessive moisture or liquids beyond its intended use.
Keep children away from the wiring and connectors during installation.
If any damage is observed, discontinue use and contact customer support.

Kontenut tal-Pakkett

Emomo Recliner Cup Holder (Model HX43HRL-1)
Integrated 8-pin connector cable

Note: A control box (Part # JCTBOX014) may be required for dual cup systems or specific recliner models. This item is sold separately.

Prodott Overview

The Emomo Recliner Cup Holder features an integrated design with touch-sensitive controls and LED illumination. Familiarize yourself with the components:

Fuq view of Emomo Recliner Cup Holder with blue LED light and touch controls

Figura 1: Fuq View of Cup Holder Controls

This image displays the top surface of the Emomo Recliner Cup Holder. The cup holder features a circular design with a blue LED light illuminating the interior rim. Around the rim, there are four touch-sensitive icons: a power symbol (lockout), a light bulb symbol (LIGHT), an upward-pointing hand symbol (OPEN), and a downward-pointing hand symbol (CLOSE). These icons indicate the touch sensor controls for the cup holder's functions and the recliner's lift mechanism.

Ġenb view of Emomo Recliner Cup Holder with 8-pin connector cable

Figura 2: Ġenb View with Connector Cable

Din l-immaġni turi ġenb view of the Emomo Recliner Cup Holder. The main body of the cup holder is black plastic. Extending from the bottom is a black electrical cable, neatly coiled, terminating in a round, 8-pin male connector. This connector is used to interface with the recliner's power system or a control box.

Dawl LED: Blue LED illuminates the inside of the cup holder.
Kontrolli tas-Sensor Touch:
- DAWL: Activates/deactivates the blue LED light.
- OPEN: Initiates the recliner's lift mechanism to open/recline.
- AGĦLAQ: Initiates the recliner's lift mechanism to close/return to upright position.
Funzjoni ta' lockout: A dedicated button to disable the touch sensors, preventing accidental activation.
Konnettur bi 8 pinnijiet: Standard round connector for power and control signals.

Setup u Installazzjoni

Skonnettjar tal-Enerġija: Before beginning installation, ensure the recliner or sofa is unplugged from its power source to prevent electrical shock.
Locate Installation Point: Identify the designated opening in your recliner or sofa for the cup holder.
Insert Cup Holder: Carefully insert the Emomo Recliner Cup Holder into the opening. Ensure it sits flush with the surface.
Qabbad il-Wiring:
- Locate the existing wiring harness or control box in your recliner.
- Connect the 8-pin connector from the cup holder to the corresponding 8-pin port on your recliner's motor or control box (e.g., JCTBOX014). Ensure the connection is firm and secure.
- For dual cup systems, ensure both cup holders are correctly connected to the control box, which then connects to the recliner's motor.
Wiring Sikur: Route and secure any loose wiring to prevent interference with moving parts of the recliner.
Rikonnessjoni tal-Enerġija: Once all connections are secure, plug the recliner back into its power source.
Funzjonalità tat-Test: Test all functions of the cup holder and recliner lift mechanism as described in the "Operating Instructions" section.

Istruzzjonijiet Operattivi

The Emomo Recliner Cup Holder features intuitive touch controls:

Activating/Deactivating LED Light:
- Tmiss bil-mod il- DAWL icon (light bulb symbol) on the cup holder.
- The blue LED light inside the cup holder will turn on or off with each touch.
Operating Recliner Lift Mechanism:
- To recline or open the chair, gently touch and hold the Miftuħa icon (upward-pointing hand symbol). Release when the desired position is reached.
- To close or return the chair to an upright position, gently touch and hold the MAGĦLUQ icon (downward-pointing hand symbol). Release when the desired position is reached.
Using the Lockout Function:
- To prevent accidental activation of the touch sensors, touch the Lockout icon (power symbol).
- When activated, the other touch sensors (LIGHT, OPEN, CLOSE) will be temporarily disabled.
- Mess il- Lockout icon again to re-enable the touch sensors.

Manutenzjoni

Tindif: Uża artab, damp cloth to wipe the surface of the cup holder. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Tixrid ta' Likwidu: In case of a liquid spill, immediately disconnect power to the recliner. Wipe up the spill and allow the unit to dry completely before reconnecting power.
Spezzjoni: Spezzjona l-wajers u l-konnessjonijiet perjodikament għal kwalunkwe sinjali ta' xedd jew ħsara.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Id-dawl LED ma jixgħelx.	No power to the recliner. Konnessjoni maħlula. Lockout function is active.	Ensure recliner is plugged in and power outlet is functional. Check the 8-pin connector for a secure fit. Deactivate the lockout function by touching the power symbol.
Recliner lift mechanism does not respond.	No power to the recliner. Konnessjoni maħlula. Lockout function is active. Issue with recliner motor or control box.	Ensure recliner is plugged in and power outlet is functional. Check the 8-pin connector for a secure fit. Deactivate the lockout function by touching the power symbol. Consult your recliner's manual or contact recliner manufacturer for motor/control box issues.
Touch sensors are unresponsive.	Lockout function is active. Surface is dirty or wet.	Deactivate the lockout function. Clean the touch sensor area with a dry, soft cloth.

Speċifikazzjonijiet

Numru tal-Mudell:	HX43HRL-1
Ditta:	Emomo
Dimensjonijiet:	4 x 5 x 6 pulzieri (approssimattiv)
Piż:	8 uqija (approssimattiv)
Materjal:	Plastik
Kulur:	Iswed
Tip ta' Konnettur:	Round 8-Pin
Karatteristiċi:	Blue LED Lighting, Touch Sensor Controls (Open/Close, Light, Lockout)
Compatible Control Box (Optional):	JCTBOX014 (for dual cup systems)

Informazzjoni dwar Garanzija

Emomo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please contact Emomo customer support.

Appoġġ għall-Klijent

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Emomo customer support for further assistance.

Please have your product model number (HX43HRL-1) and proof of purchase ready when contacting support.

	Manwal tal-Utent tas-Sistema tal-Awdjo Bluetooth eMoMo Remo4 Manwal tal-utent għas-Sistema tal-Awdjo Bluetooth eMoMo Remo4, li jagħti dettalji dwar it-twissijiet ta' sigurtà, it-tħaddim bażiku, l-ispeċifikazzjonijiet, u s-soluzzjoni tal-problemi.
	Manwal tal-Utent tal-eMoMo 39ER(B) Manwal tal-utent għall-komponent tal-mejda intelliġenti eMoMo 39ER(B), dettalji tal-pannell fuq in-naħa ta' fuqview, buttuni, funzjonijiet, operazzjonijiet bażiċi, parametri tal-prodott, u s-soluzzjoni tal-problemi.
	Manwal tal-Utent tal-iTable 3 - eMoMo Smart Tabletop Manwal komprensiv għall-utent għall-eMoMo iTable3 Smart Tabletop, li jiddeskrivi l-funzjonijiet tiegħu, il-passi operattivi, is-soluzzjoni tal-problemi, u l-parametri tal-prodott. Tgħallem kif tuża l-iċċarġjar mingħajr fili, l-awdjo Bluetooth, u s-sinkronizzazzjoni tal-console.
	ICP多功能杯座：安装、操作与规格指南 ICP多功能杯座安装操作指南，包含产品功能介绍、安装步骤、操作说明、技术规格及FCC合规声明，提供无线充电与USB快充。
	Gwida għall-Utent tad-Detentur tat-Tazza 2-f'1 CYBEX Istruzzjonijiet u twissijiet ta' sigurtà għas-CYBEX 2-in-1 Cup Holder, kompatibbli mal-strollers AVI, ZENO, PRIAM, E-PRIAM, u MIOS. Tgħallem kif tuża u twaħħal sew is-cup holder.
	Istruzzjonijiet tal-Immuntar: Sett ta' Sufan li Jistrieħ bi 3 Biċċiet Istruzzjonijiet dettaljati għall-assemblaġġ għal sett ta' sufan li jimtedd bi 3 biċċiet, inklużi listi tal-partijiet, pariri dwar l-assemblaġġ, u gwida pass pass għal installazzjoni faċli.

Emomo HX43HRL-1