uxcell Intelligent 25A Solar Charge Controller User Manual

1. Introduzzjoni

This manual provides essential instructions for the safe and efficient operation of your uxcell Intelligent 25A Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.

2. Istruzzjonijiet tas-Sigurtà

• Ensure all connections are tight and correct to avoid excessive voltagwaqgħa elettronika u perikli potenzjali.
• The controller is designed for indoor use. Protect it from water, moisture, and direct sunlight.
• Installa l-kontrollur f'żona ventilata sew biex tevita li jisħon iżżejjed.
• Connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order.
• Tippruvax tiżżarma jew issewwi l-kontrollur int stess. Ikkuntattja persunal kwalifikat għas-servizz.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Prodott Aktarview

The uxcell Intelligent 25A Solar Charge Controller is designed to manage the power flow from your solar panel to your battery and load. It features an LCD display for monitoring system status and buttons for adjusting settings.

Stampa 3.1: Quddiem view of the uxcell Intelligent 25A Solar Charge Controller. This image highlights the display screen, control buttons, and the connection terminals for the solar panel, battery, and load, clearly labeled for identification.

Komponenti Ewlenin:

• Display LCD: Shows real-time system information such as voltage, current, and charge status.
• Buttuni tal-issettjar: Used to navigate menus and adjust parameters.
• Terminali tal-Panelli Solari: Connect to your solar photovoltaic array.
• Terminali tal-Batterija: Connect to your 12V or 24V battery bank.
• Terminali tat-Tagħbija: Qabbad mat-tagħbijiet DC tiegħek.

4. Speċifikazzjonijiet

Stampa 4.1: Physical dimensions of the uxcell Intelligent 25A Solar Charge Controller, showing a width of 6.6 inches, height of 3.5 inches, and depth of 1.6 inches.

5. Setup u Installazzjoni

Follow the wiring sequence carefully to ensure proper and safe operation of the solar charge controller. Incorrect wiring can damage the controller, battery, or other components.

1. Qabbad il-batterija: Connect the battery to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the battery voltage (12V jew 24V).
2. Qabbad il-Panel Solari: Connect the solar panel to the controller's solar panel terminals. Ensure correct polarity.
3. Qabbad it-Tagħbija: Connect your DC load to the controller's load terminals. Ensure correct polarity.

Important: Always connect the battery first and disconnect the solar panel and load before disconnecting the battery.

Stampa 5.1: Wiring sequence diagram. This illustration shows the correct order of connections: 1) Battery to controller, 2) Solar panel to controller, and 3) Load to controller. It emphasizes connecting the battery first.

6. Istruzzjonijiet Operattivi

Once connected, the controller will begin operating automatically. The LCD display provides real-time information about your solar system.

6.1. LCD Display Informazzjoni

Id-displej tipikament juri:

• PV Voltage: Voltage mill-pannell solari.
• Batterija Voltage: Vol tal-batterija kurrentitage.
• Load Status: Indicates if the load is on or off.
• Status tal-Ħlas: Shows if the battery is charging.
• Tip ta 'batterija: (If adjustable)
• Temperatura: Controller's internal temperature.

6.2. L-aġġustament tas-Settings

Use the setting buttons (usually labeled with symbols like 'menu' and 'up/down' or 'enter' and 'return') to navigate through the display menus and adjust parameters such as:

• Battery type (e.g., Gel, Sealed, Flooded)
• Load control mode (e.g., 24-hour, dusk-to-dawn, timer)
• Protezzjoni ta 'skarika żejda voltage
• Float charge voltage

Refer to the on-screen prompts for specific button functions and parameter adjustments.

7. Manutenzjoni

• Regularly inspect all wiring for loose connections, corrosion, or damage.
• Żomm il-kontrollur nadif u ħieles mit-trab u l-fdalijiet. Uża drapp niexef għat-tindif.
• Aċċerta ruħek li jkun hemm ventilazzjoni adegwata madwar il-kontrollur.
• Immonitorja l-volum tal-batterijatage and charge status periodically to ensure proper system function.

8 Issolvi l-problemi

9. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok irreferi għall-imballaġġ tal-prodott jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.