Manwal tal-Utent tat-Twaħħil tat-Tubi Parker 6606 25 00

1. Introduzzjoni

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of the Parker 6606 25 00 Tube Fitting. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

The Parker 6606 25 00 is a straight, equal tube fitting designed for fluid system connections, specifically with a 25mm dimension.

Quddiem view of the Parker 6606 25 00 Tube Fitting, a black cylindrical component with two wider ends.

Figura 1: Quddiem view of the Parker 6606 25 00 Tube Fitting.

2. Prodott Aktarview

The Parker 6606 25 00 Tube Fitting is a critical component for creating secure and leak-free connections in various industrial fluid systems. Its robust design ensures reliable performance under specified operating conditions.

Karatteristiċi ewlenin:

Mudell: 6606 25 00
Tip: Straight, Equal Tube Fitting
Daqs: 25mm
Dimensjonijiet: Madwar 0.31 x 0.31 x 0.24 pulzieri
Piż: Madwar 4.8 uqija
Ditta: Parker

Angolat view of the Parker 6606 25 00 Tube Fitting, showing its textured ends and smooth central body.

Figura 2: Angolat view of the Parker 6606 25 00 Tube Fitting.

3. Setup u Installazzjoni

Proper installation is crucial for the performance and longevity of the Parker 6606 25 00 Tube Fitting. Follow these steps carefully:

Preparazzjoni: Ensure all components are clean and free from debris. Verify that the tube ends are properly cut and deburred.
Assemblaġġ tal-Komponent: Slide the nut, then the back ferrule, and finally the front ferrule onto the tube. Ensure the ferrules are oriented correctly.
Tube Insertion: Insert the tube into the fitting body until it bottoms out.
Nut Tightening: While holding the fitting body steady, tighten the nut finger-tight. Then, using a wrench, tighten the nut 1-1/4 turns past finger-tight for sizes 1/4" to 1" (or equivalent for 25mm). For larger sizes, consult specific Parker torque specifications.
Spezzjoni: Visually inspect the connection for proper alignment and tightness.

Twissija:

Tissikkax iżżejjed the nut, as this can damage the fitting or tube.
Tużax komponenti bil-ħsara.
Żgura l-kompatibbiltà with the fluid system pressure and temperature ratings.

Angolat ieħor view of the Parker 6606 25 00 Tube Fitting, highlighting the connection points and central 'transair' branding.

Figura 3: Close-up view of the Parker 6606 25 00 Tube Fitting, illustrating connection points.

4. Linji Gwida Operattivi

Once installed, the Parker 6606 25 00 Tube Fitting operates passively as a connection point within a fluid system. No active operation or user interaction is required from the fitting itself during system operation.

Ensure the system pressure and temperature remain within the specified limits for the fitting and the overall system. Regular monitoring of the system for leaks or anomalies is recommended to maintain optimal performance and safety.

5. Manutenzjoni

The Parker 6606 25 00 Tube Fitting is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended to ensure continued integrity of the fluid system:

Spezzjoni Viżwali: Regularly inspect the fitting for any signs of corrosion, physical damage, or leaks. Look for discoloration, cracks, or drips around the connection points.
Sejbien ta' tnixxija: If a leak is suspected, immediately depressurize the system before attempting any inspection or repair. Do not attempt to overtighten a leaking fitting; instead, disassemble, inspect components for damage (e.g., deformed ferrules, scratched tube), and reassemble with new components if necessary.
Tindif: If cleaning is required, use a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, solvents, or abrasive materials that could damage the fitting's surface or material properties.

Attenzjoni:

Always depressurize the system completely before performing any maintenance, disassembly, or reassembly of the fitting.
Replace damaged components with genuine Parker parts to ensure system integrity and performance.

6 Issolvi l-problemi

This section addresses common issues that may arise with tube fittings and provides potential solutions.

Problema	Kawża Possibbli	Soluzzjoni
Tnixxija fil-punt ta' konnessjoni	Improper tightening (under or over) Damaged ferrule or fitting body Incorrect tube preparation (e.g., not deburred, ovality) Incompatible tube material or size	Depressurize system, disassemble, inspect components, and reassemble correctly following installation steps. Replace any damaged ferrules or fitting components with new, genuine Parker parts. Ensure tube ends are cut squarely and deburred properly. Verify tube material and size compatibility with the fitting.
Difficulty inserting tube	Tube end not deburred or burrs present Incorrect tube size (too large) Deformed tube end	Deburr tube end thoroughly using a proper deburring tool. Verify tube diameter matches fitting size (25mm). Recut or replace tube if end is deformed.

7. Speċifikazzjonijiet

Detailed specifications for the Parker 6606 25 00 Tube Fitting:

Numru tal-Mudell: 6606 25 00
Ditta: Parker
Tip: Tube Fitting, Straight, Equal
Daqs nominali: 25mm
Dimensjonijiet tal-Prodott (Approssimattivi): 0.31 x 0.31 x 0.24 pulzieri (0.79 x 0.79 x 0.61 ċm)
Piż tal-Oġġett (Approssimattiv): 4.8 uqija (136 gramma)
Manifattur: Ritter Technology, LLC
ASIN: B071G85BQF
L-Ewwel Data Disponibbli: 28 ta’ April, 2016

8. Informazzjoni dwar Garanzija

Parker products are manufactured to high standards of quality and reliability. For specific warranty details regarding the Parker 6606 25 00 Tube Fitting, please refer to the official Parker warranty policy available on their corporate website or contact an authorized Parker distributor. Typically, warranties cover defects in material and workmanship under normal use and service conditions.

9. Appoġġ għall-Klijent

For technical assistance, product inquiries, or to report any issues related to your Parker 6606 25 00 Tube Fitting, please contact Parker customer support or your authorized distributor. When contacting support, ensure you have your product model number (6606 25 00) and any relevant purchase information ready to facilitate a quicker resolution.

You can find more information and contact details on the official Parker websit: www.parker.com

	Parker Pargrip PFA Tube Fittings: Speċifikazzjonijiet u Istruzzjonijiet tal-Assemblaġġ Gwida komprensiva għall-fittings tat-tubi Parker Pargrip PFA, li tiddeskrivi l-proċeduri tal-assemblaġġ, l-ispeċifikazzjonijiet tal-prodott, id-dimensjonijiet, u n-numri tal-partijiet għal firxa wiesgħa ta' fittings inklużi adapters, konnetturi, tees, u reducers.
	Parker EOMAT PRO: Magna tal-Assemblaġġ tal-Linja tat-Tubi Kost-Effiċjenti Gwida komprensiva għall-Parker EOMAT PRO, magna tal-assemblaġġ awtomatizzata ddisinjata għall-produzzjoni kosteffettiva u sikura għall-proċess ta' linji ta' tubi b'fittings EO-2 u Progressive Ring. Dan id-dokument jagħti dettalji dwar il-karatteristiċi, il-benefiċċji, il-modi operattivi (awtomatiċi u manwali), l-ispeċifikazzjonijiet, l-istruzzjonijiet tal-assemblaġġ, u l-informazzjoni dwar l-ordnijiet tagħha.
	Katalogu 4200-PC tal-Fittings tat-Tubi u l-Valvijiet tal-Istrumentazzjoni Parker CPI™/A-LOK® Esplora l-Katalgu komprensiv 4200-PC ta' Parker, li fih il-Fittings tat-Tubi u l-Valvijiet tal-Istrumentazzjoni robusti CPI™/A-LOK®. Iddisinjati għal applikazzjonijiet impenjattivi ta' proċess, enerġija, u strumentazzjoni, dawn il-komponenti jiżguraw konnessjonijiet affidabbli u mingħajr tnixxija taħt pressjoni għolja, vakwu, u vibrazzjoni. Dan il-katalgu jipprovdi speċifikazzjonijiet dettaljati, struzzjonijiet tal-assemblaġġ, u għażliet ta' materjali għal firxa wiesgħa ta' fittings u valvijiet.
	Parker Parflange® 170 ECO & WCM: Magni tal-Ivflaring tat-Tubi għal Konnessjonijiet F37 Dettaljat fuqview tal-magni tal-workshop Parker Parflange® 170 ECO u WCM għal flaring ta' tubi orbitali ta' 37°, iddisinjati għal konnessjonijiet tal-flanġ F37. Karatteristiċi, speċifikazzjonijiet, għażla tal-għodda, u benefiċċji għal applikazzjonijiet industrijali.
	Manwal tal-Utent tal-Parker NitroFlow Lab: Gwida għall-Ġeneratur tan-Nitroġenu Manwal komprensiv għall-utent għall-ġeneratur tan-nitroġenu Parker NitroFlow Lab. Tgħallem dwar l-installazzjoni, it-tħaddim, il-manutenzjoni, is-sigurtà, u s-soluzzjoni tal-problemi għal din is-sistema avvanzata ta' ġenerazzjoni tal-gass.
	Manwal ta' Referenza tas-Softwer tas-Sewqan b'Veloċità Varjabbli tas-Serje Parker AC20 Manwal komprensiv ta' referenza tas-softwer għall-Parker AC20 Series Variable Speed Drive, li jiddeskrivi l-konfigurazzjoni, it-tħaddim, il-programmazzjoni u s-soluzzjoni tal-problemi tiegħu għal applikazzjonijiet industrijali.

Parker 6606 25 00