Introduzzjoni
Thank you for choosing the Nokta Impact Pro Metal Detector. This advanced device is engineered for superior performance in various terrains, offering multiple operating frequencies and advanced discrimination capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your metal detector to ensure optimal performance and longevity.
Figure 1: The Nokta Impact Pro Metal Detector fully assembled.
Informazzjoni dwar is-Sigurtà
Please read and understand all safety warnings before operating the device. Failure to follow these instructions may result in injury or damage to the detector.
- Do not operate the detector near live electrical lines or underground cables.
- Avoid using the detector in thunderstorms or severe weather conditions.
- Dejjem ikseb permess qabel ma tagħmel skoperta tal-metall fuq proprjetà privata.
- Oqgħod attent meta tħaffer biex tevita li tagħmel ħsara lis-servizzi ta' utilità taħt l-art jew lil artefatti storiċi.
- Keep the detector away from strong magnetic fields.
- Ensure batteries are inserted correctly and dispose of them responsibly.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- Impact Pro Metal Detector Main Unit
- Waterproof DD Search Coil (28 x 18 cm / 11" x 7")
- Search Coil Cover
- Headphones
- 4 x Batteriji Alkalini AA
- Cable USB
- Manwal għall-Utent
- Borża tal-Ġarr
- Stand
Figure 2: All components included with the Nokta Impact Pro Metal Detector.
Assemblaġġ u Setup
Follow these steps to assemble your Nokta Impact Pro Metal Detector:
- Waħħal il-Kojl tat-Tiftix: Securely attach the search coil to the lower rod using the provided bolt and nut. Ensure the coil cable is wrapped snugly around the lower and middle rods.
- Connect the Rods: Connect the lower rod to the middle rod, and then connect the middle rod to the upper rod (main unit). Adjust the length to a comfortable position for your height.
- Daħħal Batteriji: Open the battery compartment on the main unit and insert 4 AA alkaline batteries, ensuring correct polarity. Close the compartment securely.
- Connect Search Coil Cable: Plug the search coil cable connector into the corresponding port on the main unit. Ensure it is firmly seated.
- Aġġusta l-Armrest: Adjust the armrest for a comfortable fit, allowing for easy swinging of the detector.
Figure 3: The adjustable shaft of the detector for ergonomic use.
Istruzzjonijiet Operattivi
The Nokta Impact Pro offers a variety of settings and modes to optimize your detecting experience.
Qawwa mixgħul/mitfi
Press and hold the power button located on the control box to turn the detector on or off.
Uri Fuqview
The LCD display provides crucial information about target identification, settings, and battery status.
Figura 4: Dettaljat view of the control display showing various settings and target ID.
Figure 5: The display indicating a target ID, with examples of found coins.
Frekwenzi Operattivi
The Impact Pro operates at multiple frequencies to suit different detecting conditions and target types:
- 5 kHz: Ideal for larger, deeper targets and highly mineralized ground.
- 14 kHz: A versatile general-purpose frequency, good for coins and relics.
- 20 kHz: Excellent for small, low-conductivity targets like gold nuggets and fine jewelry.
Bilanċ tal-Art
Ground balance is crucial for stable operation and accurate target identification, especially in mineralized soils. The Impact Pro offers three options:
- Awtomatiku: The detector automatically adjusts to the ground conditions.
- Manwal: Allows the user to fine-tune the ground balance for specific conditions.
- Traċċar: The detector continuously tracks and adjusts to changes in ground mineralization.
Iron Audio (Fe Volume)
This setting allows you to adjust or completely turn off the volume of the low iron tone, helping to filter out unwanted ferrous signals while still providing an indication of iron presence.
Ton Awdjo
You can change the frequency of target and threshold tones (150Hz - 700Hz) to customize your audio experience and better distinguish between different target types.
Figure 6: The detector positioned on a rocky beach, suitable for various terrains.
Figure 7: The detector in a grassy field, demonstrating its versatility across different environments.
Manutenzjoni
Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni tad-ditekter tiegħek.
- Tindif: Wipe down the detector with a damp cloth after each use. Do not use abrasive cleaners or solvents. The search coil is waterproof, but the main control box is not.
- Kura tal-batterija: Remove batteries if the detector will not be used for an extended period to prevent leakage. Use high-quality alkaline or rechargeable batteries.
- Ħażna: Aħżen id-ditekter f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Protezzjoni tal-kojl: Always use the search coil cover to protect the coil from scratches and impacts.
Issolvi l-problemi
If you encounter issues with your detector, refer to the table below for common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-ditekter ma jixgħelx | Batteriji mejta jew imdaħħla ħażin | Replace batteries with fresh ones; ensure correct polarity. |
| Erratic signals or false positives | Improper ground balance; electromagnetic interference; highly mineralized soil | Perform ground balance; move away from power lines or other electronics; adjust sensitivity. |
| No target audio | Headphones not connected; volume too low; speaker muted | Check headphone connection; increase volume; ensure speaker is not muted. |
| Sejbien ħażin tal-fond | Incorrect frequency for target size; high mineralization; low sensitivity setting | Try a lower frequency (5 kHz); re-ground balance; increase sensitivity if stable. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Frekwenzi Operattivi | 5 kHz, 14 kHz, 20 kHz |
| Piż | 4 lbs (1.8 Kgs) including search coil and batteries |
| Bilanċ tal-Art | Automatic, Manual, Tracking |
| Iron Audio (Fe Volume) | Adjustable or Off |
| Ton Awdjo | Adjustable (150Hz - 700Hz) |
| Sors tal-Enerġija | 4 x batteriji AA (inklużi) |
| Dimensjonijiet tal-Prodott | 21"T x 5"W x 10"Għ |
| Tul estiż | 56 Pulzier |
| Klassifikazzjoni tal-Protezzjoni Internazzjonali | IP54 |
| Numru ta' Programmi | 12 |
Garanzija u Appoġġ
Nokta provides a limited warranty for the Impact Pro Metal Detector against defects in materials and workmanship under normal use. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, service, or warranty claims, please contact Nokta customer service through their official websit jew distributuri awtorizzati. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Riżorsi onlajn: For additional information, FAQs, and software updates, visit the official Nokta websit: www.noktadetectors.com
