AMOCAM K80 Power Supply Control User Manual

1. Introduzzjoni

This user manual provides detailed instructions for the installation, operation, and maintenance of the AMOCAM K80 Power Supply Control unit. This device is designed to provide stable DC 12V power for various door access control systems, including electric locks, access controllers, and exit buttons. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informazzjoni dwar is-Sigurtà

Tiżgura l-input voltage (AC 110-240V) matches the specifications before connecting.
All wiring should be performed by a qualified electrician to prevent electrical shock or damage.
Skonnettja l-enerġija qabel ma twettaq kwalunkwe installazzjoni, manutenzjoni, jew issolvi l-problemi.
Tesponix l-unità għall-umdità jew temperaturi estremi.
Dan l-apparat huwa maħsub għall-użu fuq ġewwa biss.
Żgura ertjar xieraq biex tevita perikli elettriċi.

3. Karatteristiċi tal-prodott

Vol Input Universalitage: Supports AC 100-240V, 50-60Hz, suitable for various regions.
Riżultat Stabbli: Provides stable DC 12V, 3A output for connected devices.
Kontroll versatili: Features NC (Normally Closed) and NO (Normally Open) outputs to control various electric locks (e.g., electric gate lock, strike lock, bolt lock, magnetic lock).
Adjustable Lock Delay: Integrated delay control circuit allows adjustment of lock time from 0 to 15 seconds.
Protezzjonijiet tas-Sigurtà: Includes short-circuit and overload protection.
Disinn kompatt: Small and lightweight for easy installation.
Applikazzjoni wiesgħa: Compatible with building intercoms, villa doorbells, apartment doorphones, home video door phone controllers, and various access control systems.

4. Speċifikazzjonijiet

Mudell	K80 (Item Model Number: 12V-Powers)
Input Voltage	AC 110-240V, 50-60Hz
Ħruġ Voltage	DC 12V, 3A
Lock Delay Time	Aġġustabbli 0-15 sekonda
Dimensjonijiet (L x W x H)	5.5 x 3.7 x 1.5 pulzieri (madwar 140 x 94 x 38 mm)
Piż tal-oġġett	11.1 uqija (315 gramma)
Manifattur	AMOCAM
UPC	647726600253

5. Setup u Installazzjoni

Before beginning installation, ensure all power is disconnected. The AMOCAM K80 Power Supply Control unit is designed for easy integration into existing or new access control systems.

5.1 Identifikazzjoni tal-Komponent

AMOCAM K80 Power Supply Control unit, front view — **Figura 1:** Quddiem view of the AMOCAM K80 Power Supply Control unit. This image displays the main unit with its input/output labels and terminal block.

Internal components of AMOCAM K80 Power Supply Control — **Figura 2:** Intern view of the AMOCAM K80 Power Supply Control unit with the cover removed, showing the circuit board and components.

The unit features clearly labeled terminals for input power, control signals, and output to electric locks. A red LED indicates power status.

5.2 Dijagrammi tal-Wiring

Refer to the following diagrams for correct wiring configurations.

5.2.1 AC Input Wiring

Wiring diagram for AC 110-240V input to K80 Power Supply Control — **Figura 3:** Diagram illustrating the connection of AC 110-240V input power to the AMOCAM K80 unit, typically through a circuit breaker.

Connect the AC 110-240V power source to the designated AC input terminals on the K80 unit. It is recommended to connect through a circuit breaker for safety.

5.2.2 Access Control System Wiring

Detailed wiring diagram for K80 Power Supply Control with access control keypad, exit button, and electric locks — **Figura 4:** Detailed wiring connections for an access control system, showing the K80 power supply connected to an access control keypad, an exit switch button, and both Normally Closed (NC) and Normally Open (NO) electric locks.

Wiring diagram for K80 Power Supply Control with video doorbell, access control keypad, exit button, and electric locks — **Figura 5:** Comprehensive wiring diagram demonstrating the integration of the K80 power supply with a video doorbell, access control keypad, exit button, and both NC and NO electric locks.

The K80 unit provides terminals for:

CONTROL- / CONTROL+: Input for 5-24V DC to trigger the lock release.
Imbotta: Connects to an exit button.
GND: Konnessjoni mal-art.
+ 12V: DC 12V output for powering devices like keypads or doorbells.
-COM: Common terminal for lock connections.
+NC: Normally Closed output for electric locks (lock is closed when power is off).
+NO: Normally Open output for electric locks (lock is open when power is off).

Ensure all connections are secure and correctly matched to the corresponding terminals on your access control devices and electric locks.

6. Operazzjoni

6.1 Tixgħel

Once all wiring is complete and verified, connect the AC power. The red "POWER" indicator LED on the K80 unit should illuminate, indicating that the unit is receiving power and providing DC 12V output.

6.2 Adjusting Lock Delay Time

Close-up of the K80 Power Supply Control showing the adjustable unlock time dial — **Figura 6:** Image highlighting the adjustable time dial on the K80 unit, which controls the unlock delay from 0 to 15 seconds.

The K80 unit features an adjustable dial for setting the lock release delay time. This dial is typically located on the side or bottom of the unit and can be adjusted using a small screwdriver. The delay can be set from 0 to 15 seconds, allowing the connected electric lock to remain open for the desired duration after activation.

To adjust, locate the "Time" dial.
Use a small screwdriver to carefully turn the dial to increase or decrease the delay.
Test the lock operation after adjustment to ensure the desired delay is achieved.

6.3 Lock Control

The K80 unit controls electric locks via its NC and NO outputs.

Normally Closed (NC) Locks: These locks remain locked when power is applied and unlock when power is interrupted. Connect to the +NC and -COM terminals.
Normally Open (NO) Locks: These locks remain unlocked when power is applied and lock when power is interrupted. Connect to the +NO and -COM terminals.

When an access control device (e.g., keypad, exit button) sends a signal to the K80 unit, it will momentarily cut or apply power to the connected lock terminals based on the lock type (NC/NO) and the set delay time, thereby releasing or securing the lock.

7. Manutenzjoni

Tindif: Use a dry, soft cloth to clean the exterior of the unit. Do not use liquid cleaners or solvents.
Spezzjoni: Iċċekkja l-konnessjonijiet tal-wajers kollha perjodikament biex tiżgura li huma sikuri u ħielsa mill-korrużjoni.
Kundizzjonijiet Ambjentali: Ensure the unit is kept in a dry environment, away from direct sunlight and extreme temperatures.
L-ebda Partijiet li jistgħu jservu mill-utent: The internal components are not user-serviceable. Do not attempt to open or repair the unit yourself, as this will void the warranty and may cause electrical hazards.

8 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
No power indicator (red LED off)	No AC input power; faulty wiring; internal fuse blown.	Iċċekkja s-sors tal-enerġija AC u l-konnessjonijiet. Verify wiring to AC input terminals. If power is present and wiring is correct, contact support.
Electric lock does not open/close	Incorrect lock wiring (NC/NO); faulty lock; insufficient power; incorrect delay setting.	Verify lock type (NC/NO) and ensure it's connected to the correct terminals. Check connections between K80 and the lock. Ensure the access control device is sending a proper signal. Adjust the lock delay time. Test the lock independently if possible.
Lock opens/closes too quickly/slowly	Incorrect lock delay time setting.	Adjust the "Time" dial on the K80 unit to the desired delay (0-15 seconds).
L-unità tħossha sħuna	Overload; poor ventilation.	Ensure total current draw of connected devices does not exceed 3A. Provide adequate ventilation around the unit. If overheating persists, disconnect power and contact support.

9. Garanzija u Appoġġ

For warranty information or technical support, please contact AMOCAM customer service. Refer to your purchase documentation for specific warranty terms.

AMOCAM Technology Inc. is committed to providing high-quality products and customer support.

	PNI K80 Power Supply b'Timing - Manwal tal-Utent u Speċifikazzjonijiet Tekniċi Dan id-dokument jipprovdi informazzjoni dettaljata dwar il-provvista tal-enerġija PNI K80 bit-tajming, inklużi l-karatteristiċi ewlenin tagħha, l-ispeċifikazzjonijiet tekniċi, u d-dijagramma tal-wajers. Ikopri l-installazzjoni, it-tħaddim, u l-prekawzjonijiet ta' sigurtà għall-użu ma' serraturi elettromanjetiċi u mekkaniċi.
	PNI K80 Power Supply with Timing User Manual This document provides detailed information about the PNI K80 power supply with timing, including its features, technical specifications, wiring diagrams, and important warnings for installation and use.
	Manwal tal-Utent tas-Serje ORSKEY K - Konfigurazzjoni, Tħaddim, u Soluzzjoni ta' Problemi Manwal komprensiv għall-utent għad-dash cam tas-Serje ORSKEY K, li jkopri l-istartjar rapidu, il-prodott fuq nettview, installazzjoni, gwida dwar l-operat, settings tas-sistema, issolvi l-problemi, u konformità mal-FCC.
	Pixel K80 RGB Professional Video Light User Manual User manual for the Pixel K80 RGB Professional Video Light, detailing specifications, components, interface icons, installation, and operation modes including HSI, CCT, and FLS effects. Learn about brightness, color temperature, and light effect settings.
	Manwal tal-Utent tal-ORSKEY K80 u Informazzjoni dwar il-Konformità Dan id-dokument jipprovdi informazzjoni dwar il-verżjoni u jagħti dettalji dwar id-diversi ċertifikazzjonijiet ta' konformità għall-prodott ORSKEY K80, inklużi l-marki CE, UKCA, FCC, RoHS, u PSE.
	Manwal tal-Utent u Informazzjoni dwar il-Garanzija tal-ORSKEY K80 Dash Cam Gwida komprensiva għad-dash cam ORSKEY K80, li tkopri avviżi, dikjarazzjonijiet tal-FCC, dettalji tal-garanzija, appoġġ, u informazzjoni dwar il-kumpanija.

AMOCAM K80