Manwal tal-Utent tas-Sostituzzjoni tal-Linja tal-Ħsad tal-Ħaxix EARTHQUAKE 21884

Prodott Overview

The EARTHQUAKE 21884 String Mower Replacement Line is designed for efficient and durable cutting with compatible walk-behind string mowers. This package contains 24 pre-cut lines, each made from high-density nylon for extended operational life.

These replacement lines are specifically compatible with EARTHQUAKE walk-behind string mower models 37676 and 28463.

Package of 24 black Earthquake string mower replacement lines.

Image: A package containing 24 black string mower replacement lines, ready for use.

Setup u Installazzjoni

Proper installation of the replacement lines is crucial for optimal performance and safety. Always ensure your string mower is turned off and the spark plug wire is disconnected before performing any maintenance or installation procedures.

Ipprepara l-magna tal-ħsad: Ensure the string mower is on a flat, stable surface. Turn off the engine and disconnect the spark plug wire to prevent accidental starting.
Remove Old Lines (if applicable): If there are any remaining worn or broken lines, carefully remove them from the cutting head's connection points.
Insert New Lines: Take one replacement line. Locate the designated connection points or slots on the cutting head of your string mower. Thread one end of the replacement line through the connection point until the line is centered, with equal lengths extending from both sides.
Secure Lines: Ensure the lines are securely seated in their connection points. Some cutting heads may require a specific knot or locking mechanism; refer to your string mower's specific manual for detailed instructions on securing the lines.
Irrepeti: Repeat the process for all necessary line connection points on the cutting head.

Close-up of a string mower cutting head with a red replacement line installed.

Immaġni: Close-up view of a string mower's cutting head, demonstrating how a replacement line is threaded and installed. Note: Line color may vary from product image.

A person installing a red replacement line on an Earthquake walk-behind string mower.

Image: A person demonstrating the installation of a replacement line on an EARTHQUAKE walk-behind string mower. Note: Line color may vary from product image.

Konsiderazzjonijiet Operattivi

While these lines are a component, their performance is directly related to the operation of your string mower. The high-density nylon construction of EARTHQUAKE replacement lines is designed for durability and longer run times, reducing the frequency of replacements during operation.

Qtugħ Ottimali: For best results, operate your string mower at the recommended engine speed.
Evita l-ostakli: While durable, direct impact with hard surfaces like concrete, rocks, or metal fences will accelerate wear and breakage.
Tul tal-Linja: The pre-cut 21.25-inch length is optimized for compatible EARTHQUAKE string mowers. Do not attempt to modify the length as it may affect balance and cutting efficiency.

Manutenzjoni

Regular inspection and timely replacement of string mower lines ensure consistent cutting performance and safety.

Spezzjona Qabel Kull Użu: Before starting your string mower, visually inspect the lines for signs of wear, fraying, or breakage.
Replace Worn Lines: Replace lines as soon as they show significant wear or break. Operating with uneven or excessively short lines can reduce cutting efficiency and potentially strain the mower.
Ħażna: Store unused replacement lines in a cool, dry place away from direct sunlight to maintain their material integrity.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Lines break frequently.	Frequent contact with hard surfaces (rocks, concrete, fences). Operating in very dense or woody vegetation. Incorrect line installation.	Avoid hitting hard obstacles. Clear dense areas slowly and in smaller passes. Review installation steps in this manual and your mower's manual.
Prestazzjoni fqira tat-tqattigħ.	Worn or too short lines. Insufficient engine RPM.	Replace worn lines. Ensure mower is operating at full throttle for cutting.

Speċifikazzjonijiet

Numru tal-Parti: 21884
Kwantità: 24 Replacement String Mower Lines
Tul: 21.25 inches (21 ¼ inches)
Dijametru: 0.155 pulzieri
Materjal: High-density nylon
Mudelli Kompatibbli: EARTHQUAKE 37676, 28463 walk-behind string mowers
Dimensjonijiet tal-Prodott: 22 x 1 x 1 pulzieri
Piż tal-oġġett: 8 uqija

Informazzjoni ta' Appoġġ

EARTHQUAKE is committed to providing effective and innovative outdoor power equipment. For assistance, questions, or support regarding your EARTHQUAKE products, including these replacement lines, please contact our U.S.-based support team.

While specific contact details are not provided in this manual, general support information can typically be found on the official EARTHQUAKE webis-sit jew permezz tad-dokumentazzjoni oriġinali tal-prodott tiegħek.

Note: This product is a replacement part and does not typically come with a separate warranty beyond the original equipment's warranty or standard consumer rights.

	Manwal tal-Operatur tal-Mower tal-Ħaxix b'Ħjut tat-Terremot 40314 Dan il-manwal tal-operatur jipprovdi struzzjonijiet komprensivi għall-assemblaġġ, it-tħaddim, il-manutenzjoni u s-soluzzjoni tal-problemi b'mod sikur tal-Earthquake String Mower, mudell 40314. Jinkludi twissijiet ta' sigurtà, proċeduri operattivi, skedi ta' manutenzjoni u gwida għas-soluzzjoni tal-problemi.
	Manwal tal-Operatur tal-Mower tal-Ispag tat-Terremoti Dan il-manwal tal-operatur jipprovdi struzzjonijiet komprensivi għall-assemblaġġ, it-tħaddim, il-manutenzjoni u s-soluzzjoni tal-problemi sikuri tal-Earthquake String Mower, mudell 40314. Jinkludi twissijiet ta' sigurtà, speċifikazzjonijiet u gwidi dettaljati għal diversi kompiti ta' manutenzjoni.
	Manwal tal-Operatur tal-Ħsad tal-Ħsad tat-Terremoti M200 Manwal tal-operatur għall-Earthquake String Mower M200, li jiddeskrivi d-dettalji tat-tqassim tal-partijiet, it-twaħħil tal-magna u t-taljola, il-komponenti tar-ras tal-mower, u l-assemblaġġ tal-unità bażi.
	Earthquake 40314 Lawnmower Illustrated Parts Breakdown Comprehensive illustrated parts breakdown for the Earthquake 40314 lawnmower. Find detailed part numbers, descriptions, and quantities for ground-breaking power equipment manufactured by Ardisam.
	Tqassim Illustrat tal-Partijiet tal-Kultivatur ta' 2 Ċikli tat-Terremot MC43 Dijagrammi dettaljati illustrati tat-tqassim tal-partijiet u tal-assemblaġġ għall-magna, il-kappa, is-snien u l-manubriju tal-Earthquake MC43 2-Cycle Cultivator. Jinkludi n-numri tal-partijiet, id-deskrizzjonijiet u l-kwantitajiet għal identifikazzjoni u ordni faċli.
	Earthquake E43WC Power Drill and Engine Assembly Instructions and Parts List Comprehensive assembly instructions and detailed parts lists for the Earthquake E43WC Power Drill and its E43CCV Viper Engine, including exploded view diagrams and component descriptions.

TERREMOT 21884