Sauermann KT 220-N Multi-Function Data Logger

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your Sauermann KT 220-N Multi-Function Data Logger. Please read this manual thoroughly before using the device to ensure safe and efficient operation. Keep this manual for future reference.

2. Prodott Aktarview

The Sauermann KT 220-N is a versatile multi-function data logger designed for various measurement applications, particularly temperature monitoring. It features a universal probe input, allowing connection of different types of probes (not included) to suit specific measurement needs. This model operates without an integrated display, relying on software for configuration and data retrieval.

Figura 2.1: Quddiem view of the Sauermann KT 220-N Data Logger. Note the 'OK' and 'Cycle' buttons at the bottom.

Karatteristiċi ewlenin:

• Multi-function data logging capabilities.
• Universal probe input for various sensor types.
• Disinn kompatt u robust.
• Internal temperature measurement.
• Tħaddim li jaħdem bil-batterija.

3. Setup

1. Spakkjar: Carefully remove the data logger from its packaging. Verify that all components are present and undamaged.
2. Installazzjoni tal-batterija: The KT 220-N typically comes with batteries pre-installed. If not, locate the battery compartment (usually on the rear or side) and insert the specified batteries, observing correct polarity.
3. Konnessjoni tas-Sonda: Connect your desired measurement probe (e.g., temperature, humidity) to the universal input port on the data logger. Ensure a secure connection.
4. Installazzjoni tas-Softwer: Install the Sauermann data logging software (e.g., KILOG) on your computer. This software is essential for configuring the logger, starting/stopping measurements, and downloading data. Refer to the software's specific manual for installation instructions.
5. Konfigurazzjoni Inizjali: Connect the data logger to your computer via the appropriate interface (e.g., USB). Use the software to set up logging parameters such as measurement interval, start mode, and alarm thresholds.

4. Istruzzjonijiet Operattivi

The KT 220-N is primarily controlled and configured via its dedicated software. The physical buttons on the device provide basic control over logging status.

• Starting a Measurement Campaign:
  1. Ensure the logger is configured via the software.
  2. Depending on the configured start mode (e.g., immediate, delayed, button press), the logger will begin recording data.
  3. If configured for button press start, press the 'OK' button (refer to Figure 2.1) to initiate logging.
• Stopping a Measurement Campaign:
  1. Logging can be stopped via the software or, if configured, by pressing and holding the 'OK' button.
  2. The logger will automatically stop when its memory is full or if a programmed stop time is reached.
• Checking Status (if applicable): The KT 220-N does not have a display. Status indicators (LEDs) may provide basic information on logging activity or battery status. Consult the software for detailed status.
• Niżżel id-Dejta: Connect the logger to your computer and use the software to download recorded data. Data can then be viewed, analyzed, and exported.

5. Manutenzjoni

• Tindif: Clean the exterior of the data logger with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu. Kun żgur li l-ebda likwidu ma jidħol fl-apparat.
• Sostituzzjoni tal-batterija: When the battery indicator (if present, or via software) shows low battery, replace the batteries with new ones of the specified type. Ensure the device is off before replacing batteries.
• Ħażna: Store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
• Kura tas-Sonda: Refer to the specific probe's manual for cleaning and maintenance instructions.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

• Mudell: KT 220-N
• Tip: Multi-Function Data Logger
• Input: Universal Probe Input
• Wiri: Xejn
• Sors tal-Enerġija: Batteries (type specified in battery compartment)
• Manifattur: Sauermann
• ASIN: B06XC7G96T
• Data L-Ewwel Disponibbli: 1 ta’ Marzu, 2017

8. Garanzija u Appoġġ

Sauermann products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the official Sauermann webis-sit jew ikkuntattja lid-distributur awtorizzat tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Għal aktar għajnuna, jekk jogħġbok żur il- Grupp Sauermann websit.