Manwal tal-Utent tas-Swiċċ PoE Gigabit Digitus DN95330

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Digitus DN95330 Gigabit PoE Switch. This network switch offers an integrated Power over Ethernet (PoE) solution, providing an optimal, economical, and rapid connection for small and medium-sized business networks.

The device allows for network expansion even in locations where electrical lines or outlets are not readily available. It significantly improves network performance and efficiency by utilizing a single network cable for both power supply and data transfer, thanks to its PoE support.

2. Informazzjoni dwar is-Sigurtà

• Tiżgura l-provvista tal-enerġija voltage matches the requirements specified for the device.
• Tesponix l-apparat għall-ilma, umdità, jew temperaturi estremi.
• Evita li timblokka l-fetħiet tal-ventilazzjoni biex tevita sħana żejda.
• Tippruvax tiftaħ jew issewwi l-apparat int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
• Connect the grounding screw when using the switch to ensure proper electrical safety.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• DIGITUS Gigabit Ethernet PoE Desktop Switch (4 ports + 1 uplink 10/100/1000 Mbps)
• Adapter tal-Enerġija
• Manwal għall-Utent (dan id-dokument)

Image: Included power adapter and cable.

4. Prodott Aktarview

The Digitus DN95330 is a compact and robust Gigabit PoE switch designed for efficient network connectivity.

Front Panel

Immaġni: Quddiem view of the Digitus DN95330 Switch, showing ports and indicators.

The front panel features the following:

• LED PWR: Jindika l-istatus tal-enerġija.
• PoE LEDs (1-4): Indicate PoE status for ports 1-4.
• LINK/ACT LEDs (1-5): Indika l-konnessjoni tan-netwerk u l-attività għal kull port.
• PoE GIGABIT Ports (1-4): Four 10/100/1000 Mbps RJ45 ports with Power over Ethernet (PoE) capability.
• UPLINK Port (5): One 10/100/1000 Mbps RJ45 uplink port without PoE.

Panel ta' wara

Immaġni: Wara view of the Digitus DN95330 Switch, showing power input and grounding screw.

Il-pannell ta’ wara jinkludi:

• Input ta' Enerġija: Għall-konnessjoni tal-adapter tal-enerġija estern.
• Invita tal-ert: For connecting a ground wire to ensure safety. A warning sticker reminds users to connect this screw.

Image: Close-up of the grounding screw and warning label on the switch.

5. Setup

Follow these steps to set up your Digitus DN95330 Gigabit PoE Switch:

1. Pjazzament: Place the switch on a stable, flat surface or mount it in a suitable location. Ensure adequate ventilation around the device.
2. L-ertjar: Importanti: Connect a ground wire to the grounding screw on the rear panel of the switch. This is crucial for electrical safety.
3. Konnessjoni tal-Enerġija: Connect the provided power adapter to the power input port on the rear of the switch, then plug the adapter into a standard electrical outlet. The PWR LED on the front panel should illuminate.
4. Konnessjoni tal-Apparat tan-Netwerk:
   • For PoE-compatible devices (e.g., IP cameras, VoIP phones, wireless access points), connect them to any of the PoE Gigabit ports (1-4) using standard Ethernet cables. The corresponding PoE LED and LINK/ACT LED will light up.
   • For non-PoE network devices (e.g., router, NVR, PC), connect them to the UPLINK port (5) or any of the PoE Gigabit ports (1-4) if PoE is not required for that device. The LINK/ACT LED for the connected port will light up.
   

   Image: Digitus DN95330 Switch with Ethernet cables connected to ports.

5. Verifika: Once all connections are made, observe the LEDs on the front panel. Solid LINK/ACT LEDs indicate a successful connection, and solid PoE LEDs indicate power delivery to PoE devices.

6. Joperaw

The Digitus DN95330 is an unmanaged switch, meaning it operates automatically without requiring complex configuration. Once connected, it facilitates data transfer and power delivery (for PoE ports) to connected devices.

• Trasferiment tad-Data: The switch automatically detects the speed and duplex mode of connected devices (10/100/1000 Mbps) and adjusts accordingly.
• Qawwa fuq Ethernet (PoE): Ports 1-4 automatically detect and provide power to IEEE 802.3af/at compliant PoE devices. If a non-PoE device is connected to a PoE port, the switch will only provide data connectivity without power.
• Port Uplink: Port 5 serves as a dedicated uplink, typically used to connect to a router, modem, or another switch, expanding your network.

7. Manutenzjoni

To ensure optimal performance and longevity of your switch, follow these maintenance guidelines:

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tas-swiċċ. Tużax prodotti tat-tindif likwidi jew aerosol.
• Ventilazzjoni: Ensure that the ventilation holes are clear of dust and obstructions.
• Ambjent: Ħaddem is-swiċċ fil-firxiet speċifikati tat-temperatura u l-umdità. Evita li tpoġġih fid-dawl tax-xemx dirett jew ħdejn sorsi ta' sħana.
• Ġestjoni tal-Kejbil: Żomm il-kejbils tan-netwerk organizzati u ħielsa minn brim jew liwja eċċessiva biex tevita d-degradazzjoni tas-sinjal.

8 Issolvi l-problemi

If you encounter issues with your Digitus DN95330 switch, refer to the following common problems and solutions:

9. Speċifikazzjonijiet

Technical specifications for the Digitus DN95330 Gigabit PoE Switch:

Image: Dimensions of the Digitus DN95330 Switch (8.5 x 13 x 3 cm).

10. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official Digitus website or contact their customer service. You can find more solutions and information about Digitus products by visiting their solutions page: Digitus Solutions.

Digitus has been providing high-quality combined products for efficiently networked and equipped work environments for over 30 years.