Introduzzjoni
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Verdae Collection 3-Light Clear Seeded Glass New Traditional Outdoor Large Wall Lantern Light. This fixture features a traditional design with clear seeded glass and an Antique Bronze finish, suitable for various exterior settings. The open bottom design facilitates easy lamp sostituzzjoni.
Image 1: The Verdae Collection Outdoor Wall Lantern, showcasing its Antique Bronze finish and clear seeded glass panels.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-kaxxa tal-fjużijiet jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.
- Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
- Ikkonsulta elettriċista kwalifikat jekk m'intix familjari mal-wajers elettriċi.
- Ilbes nuċċalijiet tas-sigurtà u tagħmir protettiv xieraq waqt l-installazzjoni.
- Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.
- Kun żgur li l-apparat ikun immuntat sew ma' element strutturali.
- Taqbiżx il-wat massimutage speċifikat għall-bozoz.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Apparat tal-Lantern tal-Ħajt ta' Barra (1)
- Kit tal-Ħardwer tal-Immuntar (1)
- Installation Sheet (1)
Nota: Il-bozoz tad-dawl mhumiex inklużi u jridu jinxtraw separatament.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | P560016-020 |
| Brand | Progress Progress |
| Materjal | Aluminju, Ħġieġ |
| Temm | Bronż Antik |
| Materjal tad-dell | Ħġieġ Żerriegħa Ċar |
| Numru ta' Dwal | 3 |
| Bażi tal-Bozza | E12 (Kandelabra) |
| Max Wattage għal kull Bulb | 60 Watts |
| Voltage | 120 Volts |
| Użu fuq ġewwa/barra | Barra |
| Tip ta' Installazzjoni | Hardware-mounted |
| Livell ta 'Reżistenza għall-Ilma | Reżistenti għall-Ilma |
| Piż tal-oġġett | 6.3 Liri |
Image 2: Dimensional drawing of the Verdae Outdoor Wall Lantern, indicating a height of 21-3/4 inches and a width of 10-3/8 inches.
Setup u Installazzjoni
Follow these general steps for installation. Refer to the included installation sheet for detailed, model-specific instructions.
- Ipprepara għall-Installazzjoni: Turn off power at the circuit breaker or fuse box. Ensure the power is completely disconnected before proceeding.
- Installazzjoni tal-Bracket tal-Immuntar: Attach the mounting bracket to the electrical junction box using the provided screws. Ensure it is securely fastened.
- Konnessjonijiet elettriċi: Connect the fixture's wires to the house wiring according to standard electrical codes (black to black, white to white, ground to ground). Use approved wire connectors and ensure all connections are secure.
- Immuntar tal-apparat: Carefully align the fixture with the mounting bracket and secure it in place using the provided hardware. Ensure the fixture is flush against the wall and stable.
- Installa Basal: Insert three E12 base bulbs (max 60W each, not included) into the sockets. The open bottom design allows for easy access.
- Irrestawra l-Enerġija: Once installation is complete and all components are secure, restore power at the circuit breaker.
Immaġni 3: Close-up view of the lantern's base, illustrating the open bottom design for convenient bulb replacement.
Istruzzjonijiet Operattivi
This outdoor wall lantern operates via a standard wall switch or a remote-compatible switch (if installed). Once the fixture is properly installed and power is restored:
- Flip the wall switch to the 'ON' position to illuminate the fixture.
- Flip the wall switch to the 'OFF' position to turn off the fixture.
- If a remote-controlled switch is used, refer to the instructions provided with your specific remote control system.
Manutenzjoni
- Tindif: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Sostituzzjoni tal-bozza: Turn off power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E12 base bulbs (max 60W each). The open bottom design provides easy access for this task.
- Spezzjoni: Spezzjona l-apparat perjodikament għal kwalunkwe sinjal ta’ xedd, ħsara, jew konnessjonijiet laxki. Indirizza kwalunkwe problema minnufih.
Immaġni 4: Stampa dettaljata view of the clear seeded glass, which provides a traditional aesthetic and diffuses light.
Issolvi l-problemi
If you encounter issues with your outdoor wall lantern, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx | L-ebda qawwa għall-apparat Konnessjonijiet tal-wajer sfużi Bozza difettuża | Iċċekkja s-salvavita/fjus Verify all wire connections are secure (power off) Ibdel il-bozza(i) |
| Teptip ħafif | Bozza maħlula Konnessjoni tal-wajer sfużi Tip/watt ta' bozza mhux korretttage | Issikka l-bozza Check wire connections (power off) Ensure bulbs meet specifications |
| Glass is broken or cracked | Ħsara mill-impatt | Ikkuntattja l-appoġġ tal-klijent għal partijiet ta 'sostituzzjoni |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, ikkuntattja elettriċista kwalifikat jew l-appoġġ għall-klijenti ta' Progress Lighting.
Garanzija u Appoġġ
Dan il-prodott ta' Progress Lighting huwa kopert minn Garanzija Limitata ta' sena from the date of purchase. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
For warranty claims, technical assistance, or to inquire about replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or the official Progress Lighting websit.
