Introduzzjoni
The Lenco LS-50WD is a modern turntable designed for playing vinyl records. It features two built-in speakers, allowing for immediate audio playback without external equipment. The turntable supports multiple playback speeds (33, 45, and 78 RPM) to accommodate various record types. For enhanced audio, an RCA output is provided for connection to external speakers or an amplifier. Additionally, a USB port enables the conversion of vinyl records into digital formats for archiving or playback on other devices.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Lenco LS-50WD turntable. Please read it thoroughly before using the device to ensure proper function and longevity.
Istruzzjonijiet tas-Sigurtà
- Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-użu.
- Żomm dan il-manwal għal referenza futura.
- Tesponix l-unità għax-xita jew għall-umdità biex tevita nar jew xokk elettriku.
- Kun żgur li l-adapter tal-enerġija huwa kompatibbli mal-provvista tal-enerġija lokali tiegħek.
- Twaqqafx il-fetħiet tal-ventilazzjoni.
- Poġġi l-unità fuq wiċċ stabbli u livell.
- Evita li tpoġġi l-unità ħdejn sorsi tas-sħana jew dawl tax-xemx dirett.
- Aqla 'l-unità waqt maltempati tas-sajjetti jew meta ma tintużax għal perjodi twal.
- Tippruvax tagħmel manutenzjoni fuq l-unità int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
Kontenut tal-Pakkett
Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett:
- Unità tat-Turntable Lenco LS-50WD
- Qoxra tat-Trab
- Adapter 45 RPM
- Adapter tad-DC DC
- Manwal ta 'Istruzzjoni (dan id-dokument)
Prodott Overview
Familiarize yourself with the components of your Lenco LS-50WD turntable.
Figura 1: Quddiem view of the Lenco LS-50WD turntable with the dust cover open, showing the platter, tonearm, and controls.
Figura 2: Close-up view of the tonearm assembly, including the stylus and counterweight adjustment area.
Figura 3: Rear panel showing the RCA audio output (L/R), USB port, DC 12V power input, and power ON/OFF switch.
Figura 4: Fuqview of the Lenco LS-50WD highlighting key features: 2 built-in speakers, 33/45/78 RPM speeds, auto-stop function, RCA output, and PC connection via USB.
Setup
- Spakkjar: Carefully remove the turntable and all accessories from the packaging. Retain the packaging for future transport or storage.
- Pjazzament: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Installazzjoni ta' Għatu tat-Trab: Attach the provided dust cover to the hinges at the rear of the turntable. This protects the platter and stylus from dust when not in use.
- Konnessjoni tal-Enerġija: Connect the DC power adapter to the DC 12V input port on the rear of the turntable (refer to Figure 3). Plug the adapter into a suitable wall outlet.
- Konnessjoni ta' Speaker Estern (Mhux obbligatorja): If you wish to use external speakers, connect an RCA audio cable (not included) from the RCA L/R output ports on the rear of the turntable (refer to Figure 3) to the corresponding audio input on your amplifier jew kelliema attivi.
- Aġġustament tal-Kontropiż: The turntable features an adjustable counterweight. This allows for fine-tuning of the stylus pressure for optimal sound quality and to prevent damage to your records. Consult the specific instructions for your cartridge type for the recommended tracking force. Generally, you will balance the tonearm until it floats freely, then rotate the counterweight to the recommended tracking force.
Istruzzjonijiet Operattivi
- Qawwa Mixgħul: Flip the power switch on the rear panel to the 'ON' position (refer to Figure 3).
- Record Placement: Place a vinyl record onto the turntable platter. If playing a 7-inch single, place the 45 RPM adapter onto the spindle first.
- Għażla tal-Veloċità: Select the appropriate playback speed (33, 45, or 78 RPM) using the speed selector switch, usually located near the platter. Ensure the selected speed matches the record you are playing.
- Ibda l-Daqq:
- Erfa' d-driegħ bil-mod billi tuża l-lieva tal-kjuwijiet.
- Mexxi d-driegħ tat-tone fuq il-kanal tal-bidu mixtieq tar-rekord.
- Baxxi bil-mod id-driegħ tat-tone billi tuża l-lieva tal-cueing. L-istilus jagħmel kuntatt mar-rekord, u jibda d-daqq.
- Aġġustament tal-Volum: Adjust the volume using the volume knob on the turntable or your connected external audio system.
- Funzjoni ta' waqfien awtomatiku: The LS-50WD features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record.
- Waqfien tal-Daqq:
- Erfa' d-driegħ tat-tone billi tuża l-lieva tal-cueing.
- Erġa’ lura d-driegħ tat-tone fil-pożizzjoni ta’ mistrieħ tiegħu.
- Lower the cueing lever to secure the tonearm.
- USB Recording (Digitization):
- Connect the turntable's USB port (refer to Figure 3) to your computer using a USB cable (not included).
- Install appropriate audio recording software on your computer (e.g., Audacity, available online).
- Follow the software's instructions to select the turntable as the input device and begin recording your vinyl playback.
- Itfi: When finished, flip the power switch on the rear panel to the 'OFF' position.
Manutenzjoni
- Tindif tal-Unità: Wipe the turntable's surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
- Qoxra tat-Trab: Naddaf l-għatu tat-trab b'ċarruta ratba u damp cloth. Avoid harsh chemicals that may scratch or cloud the plastic.
- Kura tal-istilus: The stylus (needle) is a delicate component. Clean it periodically using a soft brush designed for stylus cleaning, brushing gently from back to front. Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
- Kura tar-Rekords: Keep your records clean and free of dust to prolong their life and the life of your stylus. Store records vertically in their sleeves.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda qawwa | L-adapter tal-enerġija mhux imqabbad jew is-sokit difettuż. | Ensure power adapter is securely connected and the outlet is functional. Check the power switch on the rear. |
| L-ebda ħoss minn kelliema integrati | Volume too low; tonearm not lowered onto record. | Increase volume. Ensure the tonearm is properly lowered onto a spinning record. |
| No sound from external speakers | RCA cables not connected correctly; external amplifier/speakers off or input not selected. | Check RCA cable connections. Ensure external amplifier/speakers are powered on and set to the correct input. |
| Ħoss distort jew jaqbeż | Dirty record or stylus; incorrect tracking force; turntable not level. | Clean record and stylus. Adjust counterweight for correct tracking force. Ensure turntable is on a level surface. |
| Veloċità tal-plejbek mhux korretta | Veloċità ħażina magħżula. | Verify the speed selector switch matches the record's required RPM (33, 45, or 78). |
Speċifikazzjonijiet
| Brand | Lenco |
| Mudell | LS-50WD |
| Dimensjonijiet tal-Prodott (L x W x H) | 12.44 x 16.22 x 4.65 pulzieri (31.6 x 41.2 x 11.8 ċm) |
| Piż tal-oġġett | 5.5 libbra (2.5 Kilogrammi) |
| Sors tal-Enerġija | DC Adapter, 12 Volts |
| Veloċitajiet tal-daqq | 33, 45, 78 RPM |
| Kelliema Inkorporati | Iva (2x) |
| Output Awdjo | RCA L/R |
| Konnettività | USB 2.0 Port (for PC connection/digitization) |
| Materjal | Injam Inġinerizzat, Injam |
| Karatteristika Speċjali | Direct-Drive, Auto-Stop |
| Komponenti Inklużi | Dust cover, 45 RPM adapter, DC power adapter |
Nota: L-ispeċifikazzjonijiet huma soġġetti għal bidla mingħajr avviż.
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-karta tal-garanzija inkluża mal-prodott tiegħek jew żur is-sit uffiċjali ta' Lenco. websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.
If you encounter issues not covered in the troubleshooting section, please contact Lenco customer support for assistance.
