Steinel IS 360-1

Steinel IS 360-1 Recessed Motion Detector Instruction Manual

Model: IS 360-1 | Brand: Steinel

1. Introduzzjoni

The Steinel IS 360-1 is a high-performance infrared motion detector designed for recessed mounting. It offers a 360-degree detection angle and a maximum range of 4 meters, making it suitable for various indoor and outdoor applications such as under eaves, carports, and suspended ceilings. This detector is compatible with all bulb types, including up to six LEDs, and features optional permanent lighting. It provides adjustable time and twilight settings for customized operation.

2. Istruzzjonijiet tas-Sigurtà

3. Prodott Aktarview

The Steinel IS 360-1 is an infrared motion detector that responds to heat radiation from moving objects. Its compact design allows for discreet recessed installation. The sensor features a multi-lens system for precise detection.

Close-up view of the Steinel IS 360-1 recessed motion detector.

Figura 3.1: Close-up view of the Steinel IS 360-1 recessed motion detector.

Diagram showing the principle of an infrared sensor detecting heat radiation.

Figure 3.2: Illustration of how an infrared sensor detects heat radiation from moving objects.

4. Installazzjoni (Setup)

The IS 360-1 is designed for recessed ceiling mounting. Ensure the mounting location is stable and provides adequate space for the device and wiring.

4.1 Dimensjonijiet tal-Immuntar

Technical drawing with dimensions for the Steinel IS 360-1 motion detector, showing a diameter of 78mm and a depth of 89mm.

Figure 4.1: Technical drawing with dimensions. The detector has a diameter of 78mm and requires a mounting depth of 89mm, with a cutout diameter of 66mm.

4.2 Passi ta' Installazzjoni

  1. Ipprepara t-Toqba tal-Immuntar: Create a circular cutout in the ceiling with a diameter of 66mm.
  2. Wiring: Connect the electrical wires to the terminal block inside the detector housing. Ensure correct polarity and secure connections. The device operates on 240 Volts.
  3. Daħħal id-Ditekter: Carefully push the detector into the prepared hole. The spring clips will secure it in place.
  4. Aġġustament Finali: Ensure the sensor lens is facing the desired detection area.
Diagram illustrating the recessed ceiling installation of the Steinel IS 360-1 motion detector.

Figure 4.2: Illustration of the recessed ceiling installation process.

5. Operazzjoni

Once installed and powered, the Steinel IS 360-1 motion detector will automatically switch on connected lights when it detects movement within its 360-degree detection zone. The light will remain on for the set time duration and will only activate when the ambient light level falls below the set twilight threshold.

Steinel IS 360-1 Recessed Motion Detector, white, installed in a ceiling.

Figure 5.1: The Steinel IS 360-1 motion detector installed in a ceiling, providing illumination upon detection.

6. Aġġustament tas-Settings

The IS 360-1 offers continuous adjustment for both time and twilight settings, as well as the detection area.

6.1 Time Setting (Time)

This dial controls how long the light remains switched on after motion is detected. It is continuously adjustable from approximately 8 seconds to 35 minutes.

6.2 Twilight Setting (Lux)

This dial determines the ambient brightness level at which the sensor becomes active. Turning it towards the sun symbol means the sensor will only activate in brighter conditions (e.g., during the day), while turning it towards the moon symbol means it will activate in darker conditions (e.g., at dusk or night).

Image showing the adjustable dials for time and twilight settings on the Steinel IS 360-1 motion detector.

Figure 6.1: Adjustable dials for time and twilight settings.

6.3 Detection Area Adjustment

The 360-degree detection area can be precisely adapted to your needs using the supplied blanking segments. These segments can be inserted into the lens to block out specific areas where detection is not desired, preventing unwanted triggering (e.g., from public pathways).

Diagram illustrating the 360-degree detection area of the Steinel IS 360-1 motion detector and how blanking segments can be used to adjust it.

Figure 6.2: Diagram showing the 360-degree detection area and the use of blanking segments for customization.

7. Manutenzjoni

The Steinel IS 360-1 motion detector is maintenance-free. For cleaning, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the lens or housing. Ensure no moisture enters the device.

8 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Light does not switch on.Ebda provvista ta 'enerġija.
Twilight setting too high.
Detection area blocked.
Iċċekkja l-konnessjoni tal-enerġija.
Adjust twilight setting (towards moon symbol).
Check for obstructions in the detection zone.
Light switches on too frequently.Detection area too wide.
Time setting too long.
Use blanking segments to narrow detection area.
Reduce time setting.
Id-dawl jibqa' mixgħul kontinwament.Permanent ON function activated (if applicable).
Continuous motion in detection area.
Check if permanent ON is enabled and disable if not desired.
Adjust detection area or time setting.

9. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
Numru tal-Mudell032845
ManifatturSteinel
Dimensjonijiet (L x W x H)8.9 x 7.8 x 7.8 ċm
Piż120 gramma
KulurAbjad
Sors tal-EnerġijaCorded Elettriku
Voltage240 Volts
Max. Kapaċità tal-Qlib1000 Watts
Kompatibilità tat-Tip ta' BozzaLED (up to 6), Incandescent, Halogen
Angolu ta 'skoperta360 grad
Max. Firxa4-il metru
L-issettjar tal-ħin8 seconds - 35 minutes (continuously adjustable)
Twilight SettingAġġustabbli kontinwament
Klassifikazzjoni tal-IPIP54
Tip ta 'ImmuntarImmuntar tas-Saqaf (Imdaħħal)
Temperatura operattivaSa 40 Grad Celsius
Pajjiż ta' Oriġiniir-Rumanija

10. Garanzija u Appoġġ

Steinel products are manufactured to the highest quality standards. This product comes with a 1-year availability of spare parts. For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official Steinel websit. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

Dokumenti Relatati - IS 360-1

Preview STEINEL IS 2360-3 ECO Infrared Ceiling Motion Detector | Specifications & Wiring
Detailed information on the STEINEL IS 2360-3 ECO infrared ceiling motion detector, including its features, technical specifications, detection zone, and wiring diagrams for installation and operation.
Preview STEINEL IR QIR Quattro 8m Presence Detector - COM1
Speċifikazzjonijiet tekniċi u funzjonali fuqview of the STEINEL IR QIR Quattro 8m COM1, an in-ceiling infrared presence detector for professional indoor applications, detailing its detection capabilities, technical parameters, and installation options.
Preview STEINEL IS 2180-2 Infrared Motion Sensor Installation Manual
Comprehensive guide for installing and operating the STEINEL IS 2180-2 infrared motion sensor, featuring adjustable range, time, and light sensitivity for reliable lighting control.
Preview STEINEL IS 2180 ECO Infrared Sensor Installation Guide and Technical Information
Comprehensive installation guide and technical specifications for the STEINEL IS 2180 ECO professional infrared motion sensor. Includes setup, functions, troubleshooting, and warranty information.
Preview Manwal tal-Utent u Gwida għall-Installazzjoni ta' Steinel XLED CAM 1 SC
Gwida komprensiva għall-floodlight LED b'sensor Steinel XLED CAM 1 SC, li tkopri l-installazzjoni, il-konfigurazzjoni, l-użu, u s-soluzzjoni tal-problemi. Tgħallem dwar il-karatteristiċi tiegħu, l-ispeċifikazzjonijiet tekniċi, u kif toperah permezz tal-Steinel CAM App.
Preview STEINEL IS 2180 ECO Infrarot-Sensor: Montageanleitung und Technische Daten
Detaillierte Anleitung für den STEINEL IS 2180 ECO Infrarot-Bewegungsmelder, inklusive Installationsschritten, technischen Spezifikationen, Funktionen und Fehlerbehebung.